Requirement Details
Electron Ion Collider
P-IR-MAG-HSR-B0PF.01.11.01
Requirement details, history, relationships and interfaces associated with requirement P-IR-MAG-HSR-B0PF.01.11.01
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 07/22/2025 00:47 | |||
| Identifier: | P-IR-MAG-HSR-B0PF.01.11.01 | WBS: | 6.06.03 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | Approved | |
| Description: | The magnet cryostat shall be designed such that The main cylindrical volume has An outside diameter less than 0.9(m) A length less than 1.65(m). All ancillary equipment, support structures and turrets, which project outside this volume must be approved by EIC engineering to ensure the design does not impede any other EIC components or block egress. | ||
| Comments: | |||
| Record Date: 05/16/2025 17:04 | |||
| Identifier: | P-IR-MAG-HSR-B0PF.1.11.1 | WBS: | 6.06.02.01.01 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | Magnet installation tolerances, Req...31 The final magnet assembly position and alignment values with respect to the nominal beam position and axis shall be within the following limits: (Note: Z is along the beam axis) Req...31.1 The magnet cold install center displacment (wrt the nominal magnet center position) Displacement in X= 2(mm) Displacement in Y=2(mm) Displacement in Z=2(mm) Req...31.2 Magnet cold rotational alignment (wrt the nominal beam Axis) Rotational about X=+/- 0.2(mrad) Rotational about Y=+/- 0.2(mrad) Rotational about Z=+/- 0.2(mrad) Note: Z is along the beam axis | ||
| Comments: | |||
| Record Date: 05/15/2025 20:34 | |||
| Identifier: | P-IR-MAG-HSR-B0PF.1.11.1 | WBS: | |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | ||
| Description: | Magnet installation tolerances, Req...31 The final magnet assembly position and alignment values with respect to the nominal beam position and axis shall be within the following limits: (Note: Z is along the beam axis) Req...31.1 The magnet cold install center displacment (wrt the nominal magnet center position) Displacement in X= 2(mm) Displacement in Y=2(mm) Displacement in Z=2(mm) Req...31.2 Magnet cold rotational alignment (wrt the nominal beam Axis) Rotational about X=+/- 0.2(mrad) Rotational about Y=+/- 0.2(mrad) Rotational about Z=+/- 0.2(mrad) Note: Z is along the beam axis | ||
| Comments: | |||
| Record Date: 02/13/2025 19:28 | |||
| Identifier: | P-IR-MAG-HSR-B0PF.1.11.1 | WBS: | 6.06.02.01.01 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | Magnet installation tolerances, Req...31 The final magnet assembly position and alignment values with respect to the nominal beam position and axis shall be within the following limits: (Note: Z is along the beam axis) Req...31.1 The magnet cold install center displacment (wrt the nominal magnet center position) Displacement in X= 2(mm) Displacement in Y=2(mm) Displacement in Z=2(mm) Req...31.2 Magnet cold rotational alignment (wrt the nominal beam Axis) Rotational about X=+/- 0.2(mrad) Rotational about Y=+/- 0.2(mrad) Rotational about Z=+/- 0.2(mrad) Note: Z is along the beam axis | ||
| Comments: | |||
| Record Date: 01/27/2025 16:43 | |||
| Identifier: | P-IR-MAG-HSR-B0PF.1.11.1 | WBS: | 6.06.02.01.01 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | Magnet installation tolerances, Req...31 The final magnet assembly position and alignment values with respect to the nominal beam position and axis shall be within the following limits: (Note: Z is along the beam axis) Req...31.1 The magnet cold install center displacment (wrt the nominal magnet center position) Displacement in X= 2(mm) Displacement in Y=2(mm) Displacement in Z=2(mm) Req...31.2 Magnet cold rotational alignment (wrt the nominal beam Axis) Rotational about X=+/- 0.2(mrad) Rotational about Y=+/- 0.2(mrad) Rotational about Z=+/- 0.2(mrad) Note: Z is along the beam axis |
||
| Comments: | |||
| Parents | |
| No parents. | |
| Children | |
| No children. |
This function not yet implemented.