P-IR-MAG-ESR-Q2ER.01.09

Requirement details, history, relationships and interfaces associated with requirement P-IR-MAG-ESR-Q2ER.01.09

Record Date: 09/10/2025 03:22
Identifier:	P-IR-MAG-ESR-Q2ER.01.09	WBS:	6.06.05.02
Date Modified:		TBD:	FALSE
Status Date:		Status:	In Process
Description:	The inner beam tube bore radius when warm, shall be greater than or equal to 50(mm). The inner radius of the coil must incorporate appropriate allowances for all the structure required between the coil inner radius and the beam tube inner radius (To include the beam tube wall thickness, Coil inner support tube, ground plane insulation, additional coil windings appropriate build tolerances etc.) The magnet design needs to comply with all the geometry constraints set forth in EIC Interaction region constraints Document number[EIC-SEG-RSI-103].
Comments:

Record Date: 09/04/2025 22:58
Identifier:	P-IR-MAG-ESR-Q2ER.01.09	WBS:	6.06.05.02
Date Modified:		TBD:	FALSE
Status Date:		Status:	In Process
Description:	The inner beam tube bore radius when warm, shall be greater than or equal to 64.5(mm). The inner radius of the coil must incorporate appropriate allowances for all the structure required between the coil inner radius and the beam tube inner radius (To include the beam tube wall thickness, Coil inner support tube, ground plane insulation, additional coil windings appropriate build tolerances etc.) The magnet design needs to comply with all the geometry constraints set forth in EIC Interaction region constraints Document number[EIC-SEG-RSI-103].
Comments:

This function not yet implemented.