Requirement Details
Electron Ion Collider
F-HSR-MAG-PS.1
Requirement details, history, relationships and interfaces associated with requirement F-HSR-MAG-PS.1
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 12/06/2024 11:10 | |||
| Identifier: | F-HSR-MAG-PS.1 | WBS: | 6.05 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | The HSR magnets shall be fed by a system of power supplies matched in voltage and maximum current to the specifications and requirements of the respective magnets | ||
| Comments: | |||
No archive versions
| Parents | |
| G-HSR.01 | The range of unpolarized ion species currently produced by the RHIC complex shall be preserved for EIC operation (from deuterons to uranium). [5.8, 5.9] |
| G-HSR.02 | The HSR shall deliver Protons bunches having at least a 70% polarization at full beam energy ready for collision. |
| G-HSR.03 | The HSR shall deliver 3He bunches having at least a 70% polarization at full beam energy ready for collision. |
| G-HSR.04 | Design of the Hadron storage ring shall allow the possibility of future operation with a polarized deuteron beam. |
| G-HSR.05 | The HSR shall provide the capability to collide protons at beam energies of 41 GeV, and from 100 to 275 GeV. |
| G-HSR.06 | The HSR shall provide the capability to collide 3He at beam energies of 41 GeV/nucleon, and from 100 to 183 GeV/nucleon. |
| G-HSR.07 | The HSR shall provide the capability to collide electrons with Au ions at 41 GeV/nucleon and 110 GeV/nucleon energies. |
| G-HSR.08 | The HSR shall provide the capability to collide other ion species at a maximum energy equivalent to a beam rigidity BÏ value of 916.67 Tm. |
| G-HSR.10 | The proton bunches delivered by the HSR shall meet all the criteria set forth in the MPT [5.9] tables 1 and 2. |
| G-HSR.09 | The HSR shall provide the capability to vary the hadron revolution frequency to match it at different hadron energies (41 GeV/nucleon and 100 - 275 GeV/nucleon) with the revolution frequency of electron beam in the ESR.  |
| G-HSR.11 | The Au ion bunches delivered by the HSR shall meet all the criteria set forth in the MPT [5.9] tables 1 and 2. |
| G-HSR.12 | For operation in the energy range 100-275 GeV the HSR shall use 4 Yellow sextants and 2 Blue sextants: Blue sextants: inner arc 2-12, outer arc 12-10. Yellow sextants: outer arc 6-4, inner arc 4-2, outer arc 10-8, inner arc 8-6. |
| G-HSR.13 | The Yellow inner arc 12-10 shall be used instead of 12-10 Blue outer arc for maintaining synchronization of the hadron and electron beams at 41 GeV/nucleon hadron beam energy. |
| G-HSR.14 | Switchyards on each side of the 10-12 arc, in IR10 and in IR12, shall be in place to redirect beam at different energies to the respective arc.  |
| G-HSR.15 | The Blue 6-4 inner arc shall be used as continuation of the ATR line to transport the hadron beam to the injection system located in IR4. |
| G-HSR.16 | The Proton injection criteria shall be as defined in MPT see [5.9] table 4. |
| G-HSR.17 | The Au ion injection criteria shall be as defined in MPT see [5.9] table 4. |
| G-HSR.18 | The 3He ion injection criteria shall be as defined in MPT see [5.9] table 4. |
| Children | |
| P-HSR-ATR-PS-C1.1 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-PS-C1.2 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-PS-C1.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-C1.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-C1.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-C1.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-C1.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-C1.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-C1.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-C1.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-C1.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-C1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-C1.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-C1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-C1.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-C1.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-C1.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-C1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-C1.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-C1.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-C1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-C1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-C1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-C1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-C1.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-C1.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-C1.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-C1.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-C1.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-C1.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-C1.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-C1.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-C1.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-C1.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-C1.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-C1.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-C1.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-C1.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-C1.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-C1.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-C1.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-C1.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-C1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-C1.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-C1.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-C1.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-C1.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-D1.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-D1.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-D1.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-D1.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-D1.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-D1.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-D1.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-D1.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D1.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D1.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-D1.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-D1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-D1.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-D1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-D1.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-D1.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-D1.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-D1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-D1.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-D1.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-D1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-D1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-D1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-D1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-D1.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-D1.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-D1.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-D1.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-D1.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-D1.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-D1.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-D1.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-D1.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-D1.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-D1.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-D1.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-D1.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-D1.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-D1.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-D1.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-D1.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-D1.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-D1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-D1.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-D1.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-D1.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-D1.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-D2.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-D2.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-D2.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-D2.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-D2.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-D2.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-D2.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-D2.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D2.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D2.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-D2.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-D2.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-D2.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-D2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-D2.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-D2.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-D2.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-D2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-D2.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-D2.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-D2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-D2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-D2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-D2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-D2.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-D2.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-D2.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-D2.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-D2.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-D2.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-D2.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-D2.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-D2.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-D2.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-D2.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-D2.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-D2.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-D2.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-D2.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-D2.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-D2.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-D2.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-D2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-D2.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-D2.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-D2.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-D2.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-D3.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-D3.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-D3.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-D3.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-D3.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-D3.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-D3.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-D3.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D3.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D3.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-D3.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-D3.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-D3.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-D3.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-D3.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-D3.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-D3.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-D3.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-D3.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-D3.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-D3.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-D3.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-D3.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-D3.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-D3.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-D3.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-D3.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-D3.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-D3.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-D3.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-D3.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-D3.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-D3.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-D3.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-D3.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-D3.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-D3.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-D3.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-D3.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-D3.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-D3.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-D3.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-D3.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-D3.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-D3.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-D3.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-D3.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-D4.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-D4.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-D4.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-D4.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-D4.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-D4.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-D4.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-D4.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D4.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D4.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-D4.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-D4.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-D4.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-D4.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-D4.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-D4.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-D4.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-D4.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-D4.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-D4.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-D4.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-D4.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-D4.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-D4.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-D4.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-D4.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-D4.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-D4.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-D4.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-D4.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-D4.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-D4.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-D4.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-D4.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-D4.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-D4.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-D4.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-D4.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-D4.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-D4.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-D4.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-D4.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-D4.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-D4.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-D4.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-D4.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-D4.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-DVERT_1.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-DVERT_1.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-DVERT_1.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-DVERT_1.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-DVERT_1.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-DVERT_1.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-DVERT_1.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-DVERT_1.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-DVERT_1.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-DVERT_1.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-DVERT_1.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-DVERT_1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-DVERT_1.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-DVERT_1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-DVERT_1.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-DVERT_1.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-DVERT_1.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-DVERT_1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-DVERT_1.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-DVERT_1.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-DVERT_1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-DVERT_1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-DVERT_1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-DVERT_1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-DVERT_1.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-DVERT_1.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-DVERT_1.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-DVERT_1.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-DVERT_1.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-DVERT_1.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-DVERT_1.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-DVERT_1.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-DVERT_1.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-DVERT_1.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-DVERT_1.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-DVERT_1.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-DVERT_1.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-DVERT_1.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-DVERT_1.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-DVERT_1.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-DVERT_1.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-DVERT_1.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-DVERT_1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-DVERT_1.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-DVERT_1.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-DVERT_1.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-DVERT_1.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-Q1.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-Q1.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-Q1.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-Q1.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-Q1.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-Q1.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-Q1.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-Q1.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-Q1.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-Q1.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-Q1.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-Q1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-Q1.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-Q1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-Q1.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-Q1.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-Q1.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-Q1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-Q1.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-Q1.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-Q1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-Q1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-Q1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-Q1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-Q1.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-Q1.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-Q1.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-Q1.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-Q1.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-Q1.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-Q1.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-Q1.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-Q1.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-Q1.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-Q1.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-Q1.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-Q1.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-Q1.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-Q1.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-Q1.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-Q1.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-Q1.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-Q1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-Q1.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-Q1.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-Q1.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-Q1.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-SEPT1.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-SEPT1.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-SEPT1.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-SEPT1.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-SEPT1.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-SEPT1.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-SEPT1.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-SEPT1.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-SEPT1.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-SEPT1.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-SEPT1.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-SEPT1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-SEPT1.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-SEPT1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-SEPT1.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-SEPT1.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-SEPT1.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-SEPT1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-SEPT1.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-SEPT1.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-SEPT1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-SEPT1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-SEPT1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-SEPT1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-SEPT1.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-SEPT1.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-SEPT1.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-SEPT1.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-SEPT1.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-SEPT1.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-SEPT1.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-SEPT1.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-SEPT1.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-SEPT1.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-SEPT1.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-SEPT1.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-SEPT1.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-SEPT1.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-SEPT1.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-SEPT1.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-SEPT1.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-SEPT1.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-SEPT1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-SEPT1.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-SEPT1.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-SEPT1.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-SEPT1.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-SEPT2.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-SEPT2.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-SEPT2.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-SEPT2.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-SEPT2.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-SEPT2.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-SEPT2.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-SEPT2.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-SEPT2.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-SEPT2.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-SEPT2.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-SEPT2.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-SEPT2.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-SEPT2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-SEPT2.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-SEPT2.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-SEPT2.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-SEPT2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-SEPT2.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-SEPT2.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-SEPT2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-SEPT2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-SEPT2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-SEPT2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-SEPT2.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-SEPT2.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-SEPT2.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-SEPT2.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-SEPT2.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-SEPT2.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-SEPT2.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-SEPT2.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-SEPT2.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-SEPT2.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-SEPT2.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-SEPT2.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-SEPT2.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-SEPT2.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-SEPT2.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-SEPT2.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-SEPT2.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-SEPT2.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-SEPT2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-SEPT2.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-SEPT2.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-SEPT2.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-SEPT2.47 | The magnet polarity connections shall be TBD |
This function not yet implemented.