Requirement Details
Electron Ion Collider
F-HSR-INJ.13
Requirement details, history, relationships and interfaces associated with requirement F-HSR-INJ.13
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 12/06/2024 11:13 | |||
| Identifier: | F-HSR-INJ.13 | WBS: | 6.05 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | The new HSR injection kicker system shall include 20 strip-line kickers , with a gap of 5.9 cm and voltage +/- 17 kV. | ||
| Comments: | |||
| Record Date: 12/06/2024 11:10 | |||
| Identifier: | F-HSR-INJ.13 | WBS: | 6.05 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | The new HSR injection kicker system shall include 20 strip-line kickers , with a gap of 5.9 cm and voltage +/- 17 kV. | ||
| Comments: | |||
| Parents | |
| G-HSR.02 | The HSR shall deliver Protons bunches having at least a 70% polarization at full beam energy ready for collision. |
| G-HSR.03 | The HSR shall deliver 3He bunches having at least a 70% polarization at full beam energy ready for collision. |
| G-HSR.04 | Design of the Hadron storage ring shall allow the possibility of future operation with a polarized deuteron beam. |
| Children | |
| P-HSR-PPD-INJ_STRIPLINE_KICK.1 | The location (Section) shall be 4 straight |
| P-HSR-PPD-INJ_STRIPLINE_KICK.2 | The kicker shall fit within the given slot width of TBD (m) |
| P-HSR-PPD-INJ_STRIPLINE_KICK.3 | The kicker shall fit within the given slot length of 20 (m) |
| P-HSR-PPD-INJ_STRIPLINE_KICK.4 | The kicker shall fit within the given slot heignt of TBD (m) |
| P-HSR-PPD-INJ_STRIPLINE_KICK.5 | The number of kickers shall be 20 |
| P-HSR-PPD-INJ_STRIPLINE_KICK.6 | The kicker striplines shall maintain a minimum horizontal half aperture of TBD (cm) |
| P-HSR-PPD-INJ_STRIPLINE_KICK.7 | The rise time shall be <9 (nS) |
| P-HSR-PPD-INJ_STRIPLINE_KICK.8 | The fall time shall be TBD (sec) |
| P-HSR-PPD-INJ_STRIPLINE_KICK.9 | The flat top time shall be 35 (nS) |
| P-HSR-PPD-INJ_STRIPLINE_KICK.10 | The waveshape shall be trap |
| P-HSR-PPD-INJ_STRIPLINE_KICK.11 | The flat top repeatability shall be (+/-) 1 % |
| P-HSR-PPD-INJ_STRIPLINE_KICK.12 | The uniformity of the flattop shall be (+/-) 1 % |
| P-HSR-PPD-INJ_STRIPLINE_KICK.13 | The deflecting Angle shall be 1 (mRad) |
| P-HSR-PPD-INJ_STRIPLINE_KICK.14 | The rep rate spec shall be tbd (Hz) |
| P-HSR-PPD-INJ_STRIPLINE_KICK.15 | The output voltage Spec shall be 22000 (Volts) |
| P-HSR-PPD-INJ_STRIPLINE_KICK.16 | The output current spec shall be 335 (Amps) |
| P-HSR-PPD-INJ_STRIPLINE_KICK.17 | The inductance with cable shall be 0 (uH) |
| P-HSR-PPD-INJ_STRIPLINE_KICK.18 | The cooling type shall be water |
This function not yet implemented.