Requirement Details
Electron Ion Collider
F-HSR-INJ.2
Requirement details, history, relationships and interfaces associated with requirement F-HSR-INJ.2
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 12/06/2024 11:13 | |||
| Identifier: | F-HSR-INJ.2 | WBS: | 6.05 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | Hadron ring injection system, consisting of the transport beamline, septum magnet and injection kickers, shall be capable of transporting the 23.8 GeV proton bunch coming from the ATR line to IR4 central area and injecting it into the HSR. | ||
| Comments: | |||
| Record Date: 12/06/2024 11:10 | |||
| Identifier: | F-HSR-INJ.2 | WBS: | 6.05 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | Hadron ring injection system, consisting of the transport beamline, septum magnet and injection kickers, shall be capable of transporting the 23.8 GeV proton bunch coming from the ATR line to IR4 central area and injecting it into the HSR. | ||
| Comments: | |||
| Parents | |
| G-HSR.22 | The HSR shall have a cryogenic system to cool and operate all elements which need cryogenic cooling and will, where possible utlise the existing RHIC cooling system. |
| Children | |
| P-HSR-ATR-MAG-C1.1 | The magnet shall have a single function. |
| P-HSR-ATR-MAG-C1.2 | The field type shall be Dipole (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk) |
| P-HSR-ATR-MAG-C1.3 | The field dir (ver or hor) shall be H-bend (V=vertical,H=horizontal,Z=beam direction ) |
| P-HSR-ATR-MAG-C1.4 | < blank > |
| P-HSR-ATR-MAG-C1.5 | < blank > |
| P-HSR-ATR-MAG-C1.6 | The magnet minimal coil inner radius shall be 0.04 m |
| P-HSR-ATR-MAG-C1.7 | The magnet minimal coil inner radius shall be TBD, 3Sigma m |
| P-HSR-ATR-MAG-C1.8 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-C1.9 | The magnet minimal coil inner radius shall be 0.5 m |
| P-HSR-ATR-MAG-C1.10 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-C1.11 | The dipole field B shall be 0.08339 T |
| P-HSR-ATR-MAG-C1.12 | <blank> |
| P-HSR-ATR-MAG-C1.13 | The ramp rate shall be TBD T/s |
| P-HSR-ATR-MAG-C1.14 | The field stability shall be TBD T/s |
| P-HSR-ATR-MAG-C1.15 | The good field region requirements shall be TBD ppm |
| P-HSR-ATR-MAG-C1.16 | The harmonic reference radius shall be TBD mm |
| P-HSR-ATR-MAG-C1.17 | The max b1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.18 | The max b2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.19 | The max b3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.20 | The max b4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.21 | The max b5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.22 | The max b6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.23 | The max b7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.24 | The max b8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.25 | The max b9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.26 | The max b10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.27 | The max b11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.28 | The max b12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.29 | The max b13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.30 | The max b14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.31 | The max b15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.32 | The max b16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.33 | The magnet shall be designed to limit Xtalk Requirements Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.34 | The X-talk shall be controlled at the following location Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.35 | The max radial distance to X-talk location content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.36 | The max analysis radius content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.37 | The max X-talk multipoles content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.38 | The max B1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.39 | The max B2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.40 | The max B3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.41 | The max B4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.42 | The max B5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.43 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.44 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.45 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.46 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.47 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.48 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.49 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.50 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.51 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.52 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.53 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.54 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.55 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-C1.56 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.1 | The magnet shall have a single function. |
| P-HSR-ATR-MAG-D1.2 | The field type shall be Dipole (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk) |
| P-HSR-ATR-MAG-D1.3 | The field dir (ver or hor) shall be H-bend (V=vertical,H=horizontal,Z=beam direction ) |
| P-HSR-ATR-MAG-D1.4 | < blank > |
| P-HSR-ATR-MAG-D1.5 | < blank > |
| P-HSR-ATR-MAG-D1.6 | The magnet minimal coil inner radius shall be 0.04 m |
| P-HSR-ATR-MAG-D1.7 | The magnet minimal coil inner radius shall be TBD, 3Sigma m |
| P-HSR-ATR-MAG-D1.8 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-D1.9 | The magnet minimal coil inner radius shall be 0.9 m |
| P-HSR-ATR-MAG-D1.10 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-D1.11 | The dipole field B shall be 1.00068 T |
| P-HSR-ATR-MAG-D1.12 | <blank> |
| P-HSR-ATR-MAG-D1.13 | The ramp rate shall be TBD T/s |
| P-HSR-ATR-MAG-D1.14 | The field stability shall be TBD T/s |
| P-HSR-ATR-MAG-D1.15 | The good field region requirements shall be TBD ppm |
| P-HSR-ATR-MAG-D1.16 | The harmonic reference radius shall be TBD mm |
| P-HSR-ATR-MAG-D1.17 | The max b1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.18 | The max b2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.19 | The max b3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.20 | The max b4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.21 | The max b5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.22 | The max b6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.23 | The max b7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.24 | The max b8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.25 | The max b9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.26 | The max b10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.27 | The max b11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.28 | The max b12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.29 | The max b13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.30 | The max b14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.31 | The max b15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.32 | The max b16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.33 | The magnet shall be designed to limit Xtalk Requirements Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.34 | The X-talk shall be controlled at the following location Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.35 | The max radial distance to X-talk location content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.36 | The max analysis radius content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.37 | The max X-talk multipoles content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.38 | The max B1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.39 | The max B2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.40 | The max B3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.41 | The max B4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.42 | The max B5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.43 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.44 | The max B7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.45 | The max B8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.46 | The max B9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.47 | The max B10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.48 | The max B11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.49 | The max B12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.50 | The max B13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.51 | The max B14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.52 | The max B15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.53 | The max B16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.54 | The magnet design shall constrain the ext. fringe field Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D1.55 | The fringe field shall be constrained at the following location Not Applicable, using exsiting ATR Specifiactions mm |
| P-HSR-ATR-MAG-D1.56 | At that location the magnitude of the fringe field shall be less than Not Applicable, using exsiting ATR Specifiactions T |
| P-HSR-ATR-MAG-D2.1 | The magnet shall have a single function. |
| P-HSR-ATR-MAG-D2.2 | The field type shall be Dipole (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk) |
| P-HSR-ATR-MAG-D2.3 | The field dir (ver or hor) shall be H-bend (V=vertical,H=horizontal,Z=beam direction ) |
| P-HSR-ATR-MAG-D2.4 | < blank > |
| P-HSR-ATR-MAG-D2.5 | < blank > |
| P-HSR-ATR-MAG-D2.6 | The magnet minimal coil inner radius shall be 0.04 m |
| P-HSR-ATR-MAG-D2.7 | The magnet minimal coil inner radius shall be TBD, 3Sigma m |
| P-HSR-ATR-MAG-D2.8 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-D2.9 | The magnet minimal coil inner radius shall be 0.5 m |
| P-HSR-ATR-MAG-D2.10 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-D2.11 | The dipole field B shall be 0.41695 T |
| P-HSR-ATR-MAG-D2.12 | <blank> |
| P-HSR-ATR-MAG-D2.13 | The ramp rate shall be TBD T/s |
| P-HSR-ATR-MAG-D2.14 | The field stability shall be TBD T/s |
| P-HSR-ATR-MAG-D2.15 | The good field region requirements shall be TBD ppm |
| P-HSR-ATR-MAG-D2.16 | The harmonic reference radius shall be TBD mm |
| P-HSR-ATR-MAG-D2.17 | The max b1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.18 | The max b2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.19 | The max b3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.20 | The max b4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.21 | The max b5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.22 | The max b6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.23 | The max b7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.24 | The max b8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.25 | The max b9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.26 | The max b10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.27 | The max b11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.28 | The max b12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.29 | The max b13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.30 | The max b14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.31 | The max b15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.32 | The max b16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.33 | The magnet shall be designed to limit Xtalk Requirements Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.34 | The X-talk shall be controlled at the following location Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.35 | The max radial distance to X-talk location content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.36 | The max analysis radius content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.37 | The max X-talk multipoles content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.38 | The max B1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.39 | The max B2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.40 | The max B3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.41 | The max B4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.42 | The max B5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.43 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.44 | The max B7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.45 | The max B8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.46 | The max B9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.47 | The max B10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.48 | The max B11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.49 | The max B12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.50 | The max B13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.51 | The max B14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.52 | The max B15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.53 | The max B16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.54 | The magnet design shall constrain the ext. fringe field Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D2.55 | The fringe field shall be constrained at the following location Not Applicable, using exsiting ATR Specifiactions mm |
| P-HSR-ATR-MAG-D2.56 | At that location the magnitude of the fringe field shall be less than Not Applicable, using exsiting ATR Specifiactions T |
| P-HSR-ATR-MAG-D3.1 | The magnet shall have a single function. |
| P-HSR-ATR-MAG-D3.2 | The field type shall be Dipole (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk) |
| P-HSR-ATR-MAG-D3.3 | The field dir (ver or hor) shall be H-bend (V=vertical,H=horizontal,Z=beam direction ) |
| P-HSR-ATR-MAG-D3.4 | < blank > |
| P-HSR-ATR-MAG-D3.5 | < blank > |
| P-HSR-ATR-MAG-D3.6 | The magnet minimal coil inner radius shall be 0.04 m |
| P-HSR-ATR-MAG-D3.7 | The magnet minimal coil inner radius shall be TBD, 3Sigma m |
| P-HSR-ATR-MAG-D3.8 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-D3.9 | The magnet minimal coil inner radius shall be 1 m |
| P-HSR-ATR-MAG-D3.10 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-D3.11 | The dipole field B shall be 1.00068 T |
| P-HSR-ATR-MAG-D3.12 | <blank> |
| P-HSR-ATR-MAG-D3.13 | The ramp rate shall be TBD T/s |
| P-HSR-ATR-MAG-D3.14 | The field stability shall be TBD T/s |
| P-HSR-ATR-MAG-D3.15 | The good field region requirements shall be TBD ppm |
| P-HSR-ATR-MAG-D3.16 | The harmonic reference radius shall be TBD mm |
| P-HSR-ATR-MAG-D3.17 | The max b1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.18 | The max b2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.19 | The max b3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.20 | The max b4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.21 | The max b5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.22 | The max b6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.23 | The max b7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.24 | The max b8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.25 | The max b9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.26 | The max b10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.27 | The max b11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.28 | The max b12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.29 | The max b13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.30 | The max b14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.31 | The max b15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.32 | The max b16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.33 | The magnet shall be designed to limit Xtalk Requirements Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.34 | The X-talk shall be controlled at the following location Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.35 | The max radial distance to X-talk location content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.36 | The max analysis radius content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.37 | The max X-talk multipoles content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.38 | The max B1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.39 | The max B2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.40 | The max B3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.41 | The max B4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.42 | The max B5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.43 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.44 | The max B7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.45 | The max B8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.46 | The max B9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.47 | The max B10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.48 | The max B11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.49 | The max B12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.50 | The max B13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.51 | The max B14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.52 | The max B15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.53 | The max B16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.54 | The magnet design shall constrain the ext. fringe field Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D3.55 | The fringe field shall be constrained at the following location Not Applicable, using exsiting ATR Specifiactions mm |
| P-HSR-ATR-MAG-D3.56 | At that location the magnitude of the fringe field shall be less than Not Applicable, using exsiting ATR Specifiactions T |
| P-HSR-ATR-MAG-D4.1 | The magnet shall have a single function. |
| P-HSR-ATR-MAG-D4.2 | The field type shall be Dipole (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk) |
| P-HSR-ATR-MAG-D4.3 | The field dir (ver or hor) shall be H-bend (V=vertical,H=horizontal,Z=beam direction ) |
| P-HSR-ATR-MAG-D4.4 | < blank > |
| P-HSR-ATR-MAG-D4.5 | < blank > |
| P-HSR-ATR-MAG-D4.6 | The magnet minimal coil inner radius shall be 0.04 m |
| P-HSR-ATR-MAG-D4.7 | The magnet minimal coil inner radius shall be TBD, 3Sigma m |
| P-HSR-ATR-MAG-D4.8 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-D4.9 | The magnet minimal coil inner radius shall be 3 m |
| P-HSR-ATR-MAG-D4.10 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-D4.11 | The dipole field B shall be 2.5017 T |
| P-HSR-ATR-MAG-D4.12 | <blank> |
| P-HSR-ATR-MAG-D4.13 | The ramp rate shall be TBD T/s |
| P-HSR-ATR-MAG-D4.14 | The field stability shall be TBD T/s |
| P-HSR-ATR-MAG-D4.15 | The good field region requirements shall be TBD ppm |
| P-HSR-ATR-MAG-D4.16 | The harmonic reference radius shall be TBD mm |
| P-HSR-ATR-MAG-D4.17 | The max b1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.18 | The max b2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.19 | The max b3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.20 | The max b4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.21 | The max b5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.22 | The max b6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.23 | The max b7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.24 | The max b8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.25 | The max b9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.26 | The max b10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.27 | The max b11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.28 | The max b12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.29 | The max b13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.30 | The max b14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.31 | The max b15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.32 | The max b16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.33 | The magnet shall be designed to limit Xtalk Requirements Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.34 | The X-talk shall be controlled at the following location Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.35 | The max radial distance to X-talk location content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.36 | The max analysis radius content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.37 | The max X-talk multipoles content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.38 | The max B1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.39 | The max B2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.40 | The max B3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.41 | The max B4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.42 | The max B5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.43 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.44 | The max B7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.45 | The max B8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.46 | The max B9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.47 | The max B10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.48 | The max B11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.49 | The max B12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.50 | The max B13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.51 | The max B14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.52 | The max B15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.53 | The max B16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.54 | The magnet design shall constrain the ext. fringe field Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-D4.55 | The fringe field shall be constrained at the following location Not Applicable, using exsiting ATR Specifiactions mm |
| P-HSR-ATR-MAG-D4.56 | At that location the magnitude of the fringe field shall be less than Not Applicable, using exsiting ATR Specifiactions T |
| P-HSR-ATR-MAG-DVERT_1.1 | The magnet shall have a single function. |
| P-HSR-ATR-MAG-DVERT_1.2 | The field type shall be Dipole (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk) |
| P-HSR-ATR-MAG-DVERT_1.3 | The field dir (ver or hor) shall be H (V=vertical,H=horizontal,Z=beam direction ) |
| P-HSR-ATR-MAG-DVERT_1.4 | < blank > |
| P-HSR-ATR-MAG-DVERT_1.5 | < blank > |
| P-HSR-ATR-MAG-DVERT_1.6 | The magnet minimal coil inner radius shall be 0.04 m |
| P-HSR-ATR-MAG-DVERT_1.7 | The magnet minimal coil inner radius shall be TBD, 3Sigma? m |
| P-HSR-ATR-MAG-DVERT_1.8 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-DVERT_1.9 | The magnet minimal coil inner radius shall be 1.5 m |
| P-HSR-ATR-MAG-DVERT_1.10 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-DVERT_1.11 | The dipole field B shall be 1.6678 T |
| P-HSR-ATR-MAG-DVERT_1.12 | <blank> |
| P-HSR-ATR-MAG-DVERT_1.13 | The ramp rate shall be TBD T/s |
| P-HSR-ATR-MAG-DVERT_1.14 | The field stability shall be TBD T/s |
| P-HSR-ATR-MAG-DVERT_1.15 | The good field region requirements shall be TBD ppm |
| P-HSR-ATR-MAG-DVERT_1.16 | The harmonic reference radius shall be TBD mm |
| P-HSR-ATR-MAG-DVERT_1.17 | The max b1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.18 | The max b2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.19 | The max b3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.20 | The max b4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.21 | The max b5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.22 | The max b6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.23 | The max b7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.24 | The max b8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.25 | The max b9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.26 | The max b10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.27 | The max b11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.28 | The max b12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.29 | The max b13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.30 | The max b14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.31 | The max b15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.32 | The max b16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.33 | The magnet shall be designed to limit Xtalk Requirements Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.34 | The X-talk shall be controlled at the following location Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.35 | The max radial distance to X-talk location content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.36 | The max analysis radius content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.37 | The max X-talk multipoles content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.38 | The max B1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.39 | The max B2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.40 | The max B3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.41 | The max B4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.42 | The max B5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.43 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.44 | The max B7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.45 | The max B8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.46 | The max B9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.47 | The max B10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.48 | The max B11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.49 | The max B12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.50 | The max B13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.51 | The max B14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.52 | The max B15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.53 | The max B16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.54 | The magnet design shall constrain the ext. fringe field Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-DVERT_1.55 | The fringe field shall be constrained at the following location Not Applicable, using exsiting ATR Specifiactions mm |
| P-HSR-ATR-MAG-DVERT_1.56 | At that location the magnitude of the fringe field shall be less than Not Applicable, using exsiting ATR Specifiactions T |
| P-HSR-ATR-MAG-Q1.1 | The magnet shall have a single function. |
| P-HSR-ATR-MAG-Q1.2 | The field type shall be Q (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk) |
| P-HSR-ATR-MAG-Q1.3 | < blank > |
| P-HSR-ATR-MAG-Q1.4 | The field rotation (norm or skew) shall be N (N=norm, Sk=skew) |
| P-HSR-ATR-MAG-Q1.5 | The magnet field rotation shall be 0.04 m |
| P-HSR-ATR-MAG-Q1.6 | The min gap shall be TBD |
| P-HSR-ATR-MAG-Q1.7 | The good field aperture drx required shall be TBD |
| P-HSR-ATR-MAG-Q1.8 | The good field aperture dry required shall be TBD |
| P-HSR-ATR-MAG-Q1.9 | The magnet minimal coil inner radius shall be 0.9 m |
| P-HSR-ATR-MAG-Q1.10 | The eff Length shall be TBD |
| P-HSR-ATR-MAG-Q1.11 | The dipole field B shall be TBD |
| P-HSR-ATR-MAG-Q1.12 | The grad field G shall be 12.5085 T/m(n-1) |
| P-HSR-ATR-MAG-Q1.13 | The ramp rate shall be TBD |
| P-HSR-ATR-MAG-Q1.14 | The field stability shall be TBD |
| P-HSR-ATR-MAG-Q1.15 | The good field region requirements shall be TBD |
| P-HSR-ATR-MAG-Q1.16 | The harmonic reference radius shall be TBD |
| P-HSR-ATR-MAG-Q1.17 | The max b1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.18 | The max b2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.19 | The max b3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.20 | The max b4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.21 | The max b5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.22 | The max b6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.23 | The max b7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.24 | The max b8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.25 | The max b9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.26 | The max b10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.27 | The max b11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.28 | The max b12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.29 | The max b13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.30 | The max b14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.31 | The max b15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.32 | The max b16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.33 | The magnet shall be designed to limit Xtalk Requirements Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.34 | The X-talk shall be controlled at the following location Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.35 | The max radial distance to X-talk location content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.36 | The max analysis radius content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.37 | The max X-talk multipoles content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.38 | The max B1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.39 | The max B2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.40 | The max B3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.41 | The max B4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.42 | The max B5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.43 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.44 | The max B7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.45 | The max B8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.46 | The max B9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.47 | The max B10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.48 | The max B11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.49 | The max B12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.50 | The max B13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.51 | The max B14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.52 | The max B15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.53 | The max B16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.54 | The magnet design shall constrain the ext. fringe field Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-Q1.55 | The fringe field shall be constrained at the following location Not Applicable, using exsiting ATR Specifiactions mm |
| P-HSR-ATR-MAG-Q1.56 | At that location the magnitude of the fringe field shall be less than Not Applicable, using exsiting ATR Specifiactions T |
| P-HSR-ATR-MAG-SEPT1.1 | The magnet shall have a single function. |
| P-HSR-ATR-MAG-SEPT1.2 | The field type shall be Septum (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk) |
| P-HSR-ATR-MAG-SEPT1.3 | The field dir (ver or hor) shall be H-bend (V=vertical,H=horizontal,Z=beam direction ) |
| P-HSR-ATR-MAG-SEPT1.4 | < blank > |
| P-HSR-ATR-MAG-SEPT1.5 | < blank > |
| P-HSR-ATR-MAG-SEPT1.6 | The magnet minimal coil inner radius shall be 0.04 m |
| P-HSR-ATR-MAG-SEPT1.7 | The magnet minimal coil inner radius shall be TBD, 3Sigma m |
| P-HSR-ATR-MAG-SEPT1.8 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-SEPT1.9 | The magnet minimal coil inner radius shall be 1.5 m |
| P-HSR-ATR-MAG-SEPT1.10 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-SEPT1.11 | The dipole field B shall be 1.09449375 T |
| P-HSR-ATR-MAG-SEPT1.12 | <blank> |
| P-HSR-ATR-MAG-SEPT1.13 | The ramp rate shall be TBD T/s |
| P-HSR-ATR-MAG-SEPT1.14 | The field stability shall be TBD T/s |
| P-HSR-ATR-MAG-SEPT1.15 | The good field region requirements shall be TBD ppm |
| P-HSR-ATR-MAG-SEPT1.16 | The harmonic reference radius shall be TBD mm |
| P-HSR-ATR-MAG-SEPT1.17 | The max b1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.18 | The max b2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.19 | The max b3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.20 | The max b4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.21 | The max b5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.22 | The max b6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.23 | The max b7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.24 | The max b8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.25 | The max b9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.26 | The max b10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.27 | The max b11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.28 | The max b12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.29 | The max b13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.30 | The max b14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.31 | The max b15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.32 | The max b16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.33 | The magnet shall be designed to limit Xtalk Requirements Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.34 | The X-talk shall be controlled at the following location Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.35 | The max radial distance to X-talk location content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.36 | The max analysis radius content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.37 | The max X-talk multipoles content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.38 | The max B1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.39 | The max B2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.40 | The max B3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.41 | The max B4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.42 | The max B5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.43 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.44 | The max B7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.45 | The max B8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.46 | The max B9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.47 | The max B10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.48 | The max B11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.49 | The max B12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.50 | The max B13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.51 | The max B14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.52 | The max B15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.53 | The max B16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.54 | The magnet design shall constrain the ext. fringe field Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT1.55 | The fringe field shall be constrained at the following location Not Applicable, using exsiting ATR Specifiactions mm |
| P-HSR-ATR-MAG-SEPT1.56 | At that location the magnitude of the fringe field shall be less than Not Applicable, using exsiting ATR Specifiactions T |
| P-HSR-ATR-MAG-SEPT2.1 | The magnet shall have a single function. |
| P-HSR-ATR-MAG-SEPT2.2 | The field type shall be Septum (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk) |
| P-HSR-ATR-MAG-SEPT2.3 | The field dir (ver or hor) shall be H-bend (V=vertical,H=horizontal,Z=beam direction ) |
| P-HSR-ATR-MAG-SEPT2.4 | < blank > |
| P-HSR-ATR-MAG-SEPT2.5 | < blank > |
| P-HSR-ATR-MAG-SEPT2.6 | The magnet minimal coil inner radius shall be 0.04 m |
| P-HSR-ATR-MAG-SEPT2.7 | The magnet minimal coil inner radius shall be TBD, 3Sigma m |
| P-HSR-ATR-MAG-SEPT2.8 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-SEPT2.9 | The magnet minimal coil inner radius shall be 2.5 m |
| P-HSR-ATR-MAG-SEPT2.10 | The magnet minimal coil inner radius shall be TBD m |
| P-HSR-ATR-MAG-SEPT2.11 | The dipole field B shall be 1.82415625 T |
| P-HSR-ATR-MAG-SEPT2.12 | <blank> |
| P-HSR-ATR-MAG-SEPT2.13 | The ramp rate shall be TBD T/s |
| P-HSR-ATR-MAG-SEPT2.14 | The field stability shall be TBD T/s |
| P-HSR-ATR-MAG-SEPT2.15 | The good field region requirements shall be TBD ppm |
| P-HSR-ATR-MAG-SEPT2.16 | The harmonic reference radius shall be TBD mm |
| P-HSR-ATR-MAG-SEPT2.17 | The max b1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.18 | The max b2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.19 | The max b3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.20 | The max b4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.21 | The max b5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.22 | The max b6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.23 | The max b7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.24 | The max b8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.25 | The max b9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.26 | The max b10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.27 | The max b11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.28 | The max b12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.29 | The max b13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.30 | The max b14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.31 | The max b15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.32 | The max b16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.33 | The magnet shall be designed to limit Xtalk Requirements Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.34 | The X-talk shall be controlled at the following location Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.35 | The max radial distance to X-talk location content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.36 | The max analysis radius content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.37 | The max X-talk multipoles content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.38 | The max B1 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.39 | The max B2 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.40 | The max B3 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.41 | The max B4 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.42 | The max B5 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.43 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.44 | The max B7 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.45 | The max B8 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.46 | The max B9 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.47 | The max B10 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.48 | The max B11 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.49 | The max B12 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.50 | The max B13 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.51 | The max B14 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.52 | The max B15 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.53 | The max B16 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.54 | The magnet design shall constrain the ext. fringe field Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-MAG-SEPT2.55 | The fringe field shall be constrained at the following location Not Applicable, using exsiting ATR Specifiactions mm |
| P-HSR-ATR-MAG-SEPT2.56 | At that location the magnitude of the fringe field shall be less than Not Applicable, using exsiting ATR Specifiactions T |
| P-HSR-ATR-PS-C1.1 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-PS-C1.2 | The max B6 content shall be Not Applicable, using exsiting ATR Specifiactions |
| P-HSR-ATR-PS-C1.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-C1.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-C1.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-C1.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-C1.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-C1.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-C1.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-C1.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-C1.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-C1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-C1.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-C1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-C1.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-C1.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-C1.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-C1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-C1.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-C1.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-C1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-C1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-C1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-C1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-C1.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-C1.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-C1.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-C1.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-C1.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-C1.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-C1.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-C1.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-C1.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-C1.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-C1.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-C1.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-C1.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-C1.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-C1.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-C1.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-C1.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-C1.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-C1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-C1.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-C1.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-C1.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-C1.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-D1.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-D1.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-D1.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-D1.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-D1.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-D1.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-D1.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-D1.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D1.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D1.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-D1.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-D1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-D1.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-D1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-D1.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-D1.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-D1.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-D1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-D1.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-D1.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-D1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-D1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-D1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-D1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-D1.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-D1.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-D1.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-D1.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-D1.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-D1.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-D1.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-D1.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-D1.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-D1.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-D1.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-D1.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-D1.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-D1.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-D1.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-D1.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-D1.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-D1.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-D1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-D1.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-D1.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-D1.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-D1.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-D2.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-D2.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-D2.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-D2.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-D2.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-D2.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-D2.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-D2.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D2.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D2.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-D2.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-D2.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-D2.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-D2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-D2.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-D2.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-D2.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-D2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-D2.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-D2.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-D2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-D2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-D2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-D2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-D2.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-D2.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-D2.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-D2.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-D2.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-D2.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-D2.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-D2.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-D2.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-D2.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-D2.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-D2.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-D2.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-D2.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-D2.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-D2.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-D2.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-D2.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-D2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-D2.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-D2.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-D2.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-D2.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-D3.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-D3.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-D3.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-D3.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-D3.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-D3.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-D3.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-D3.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D3.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D3.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-D3.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-D3.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-D3.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-D3.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-D3.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-D3.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-D3.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-D3.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-D3.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-D3.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-D3.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-D3.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-D3.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-D3.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-D3.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-D3.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-D3.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-D3.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-D3.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-D3.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-D3.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-D3.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-D3.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-D3.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-D3.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-D3.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-D3.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-D3.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-D3.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-D3.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-D3.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-D3.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-D3.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-D3.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-D3.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-D3.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-D3.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-D4.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-D4.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-D4.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-D4.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-D4.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-D4.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-D4.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-D4.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D4.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-D4.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-D4.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-D4.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-D4.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-D4.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-D4.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-D4.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-D4.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-D4.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-D4.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-D4.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-D4.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-D4.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-D4.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-D4.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-D4.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-D4.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-D4.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-D4.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-D4.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-D4.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-D4.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-D4.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-D4.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-D4.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-D4.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-D4.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-D4.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-D4.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-D4.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-D4.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-D4.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-D4.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-D4.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-D4.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-D4.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-D4.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-D4.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-DVERT_1.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-DVERT_1.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-DVERT_1.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-DVERT_1.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-DVERT_1.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-DVERT_1.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-DVERT_1.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-DVERT_1.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-DVERT_1.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-DVERT_1.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-DVERT_1.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-DVERT_1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-DVERT_1.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-DVERT_1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-DVERT_1.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-DVERT_1.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-DVERT_1.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-DVERT_1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-DVERT_1.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-DVERT_1.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-DVERT_1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-DVERT_1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-DVERT_1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-DVERT_1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-DVERT_1.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-DVERT_1.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-DVERT_1.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-DVERT_1.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-DVERT_1.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-DVERT_1.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-DVERT_1.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-DVERT_1.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-DVERT_1.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-DVERT_1.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-DVERT_1.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-DVERT_1.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-DVERT_1.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-DVERT_1.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-DVERT_1.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-DVERT_1.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-DVERT_1.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-DVERT_1.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-DVERT_1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-DVERT_1.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-DVERT_1.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-DVERT_1.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-DVERT_1.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-Q1.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-Q1.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-Q1.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-Q1.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-Q1.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-Q1.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-Q1.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-Q1.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-Q1.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-Q1.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-Q1.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-Q1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-Q1.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-Q1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-Q1.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-Q1.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-Q1.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-Q1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-Q1.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-Q1.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-Q1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-Q1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-Q1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-Q1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-Q1.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-Q1.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-Q1.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-Q1.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-Q1.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-Q1.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-Q1.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-Q1.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-Q1.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-Q1.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-Q1.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-Q1.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-Q1.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-Q1.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-Q1.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-Q1.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-Q1.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-Q1.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-Q1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-Q1.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-Q1.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-Q1.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-Q1.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-SEPT1.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-SEPT1.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-SEPT1.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-SEPT1.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-SEPT1.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-SEPT1.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-SEPT1.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-SEPT1.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-SEPT1.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-SEPT1.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-SEPT1.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-SEPT1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-SEPT1.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-SEPT1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-SEPT1.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-SEPT1.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-SEPT1.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-SEPT1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-SEPT1.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-SEPT1.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-SEPT1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-SEPT1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-SEPT1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-SEPT1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-SEPT1.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-SEPT1.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-SEPT1.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-SEPT1.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-SEPT1.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-SEPT1.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-SEPT1.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-SEPT1.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-SEPT1.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-SEPT1.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-SEPT1.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-SEPT1.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-SEPT1.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-SEPT1.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-SEPT1.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-SEPT1.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-SEPT1.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-SEPT1.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-SEPT1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-SEPT1.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-SEPT1.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-SEPT1.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-SEPT1.47 | The magnet polarity connections shall be TBD |
| P-HSR-ATR-PS-SEPT2.1 | The number of Independent functions on the magnets being powered shall be TBD |
| P-HSR-ATR-PS-SEPT2.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-ATR-PS-SEPT2.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-HSR-ATR-PS-SEPT2.4 | The magnets being powered shall be saturated TBD Y/N |
| P-HSR-ATR-PS-SEPT2.5 | The miits rating of the magnet being powred shall be TBD |
| P-HSR-ATR-PS-SEPT2.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-HSR-ATR-PS-SEPT2.7 | The nominal current of the magnets being powered shall be TBD A |
| P-HSR-ATR-PS-SEPT2.8 | The minmum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-SEPT2.9 | The maximum current the PS must operate at shall be TBD A |
| P-HSR-ATR-PS-SEPT2.10 | The PS current type DC or AC shall be TBD DC\AC |
| P-HSR-ATR-PS-SEPT2.11 | The PS AC waveshape required shall be TBD |
| P-HSR-ATR-PS-SEPT2.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-ATR-PS-SEPT2.13 | The full power bandwidth required shall be TBD |
| P-HSR-ATR-PS-SEPT2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-ATR-PS-SEPT2.15 | The time period for specified stability shall be TBD s |
| P-HSR-ATR-PS-SEPT2.16 | The short term stability shall be TBD A/s |
| P-HSR-ATR-PS-SEPT2.17 | The long term stability shall be TBD A/s |
| P-HSR-ATR-PS-SEPT2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-ATR-PS-SEPT2.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-ATR-PS-SEPT2.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-ATR-PS-SEPT2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-ATR-PS-SEPT2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-ATR-PS-SEPT2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-ATR-PS-SEPT2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-ATR-PS-SEPT2.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-ATR-PS-SEPT2.26 | The voltage tap configuration shall be TBD - |
| P-HSR-ATR-PS-SEPT2.27 | The threshold levels shall be TBD V |
| P-HSR-ATR-PS-SEPT2.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-HSR-ATR-PS-SEPT2.29 | The design shall have quench heaters TBD Y/N |
| P-HSR-ATR-PS-SEPT2.30 | The quench heater power rating shall be TBD W |
| P-HSR-ATR-PS-SEPT2.31 | The design shall have warm up heaters TBD Y/N |
| P-HSR-ATR-PS-SEPT2.32 | The warmup heater power rating shall be TBD W |
| P-HSR-ATR-PS-SEPT2.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-ATR-PS-SEPT2.34 | The magnet turns ratio shall be TBD |
| P-HSR-ATR-PS-SEPT2.35 | The terminal voltage shall be TBD V |
| P-HSR-ATR-PS-SEPT2.36 | The design shall have thermal switches TBD |
| P-HSR-ATR-PS-SEPT2.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-ATR-PS-SEPT2.38 | The design shall have water flow switches TBD |
| P-HSR-ATR-PS-SEPT2.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-ATR-PS-SEPT2.40 | The design shall have access controls interlocks TBD |
| P-HSR-ATR-PS-SEPT2.41 | The main terminals lug details shall be TBD |
| P-HSR-ATR-PS-SEPT2.42 | The lead end indications shall be TBD |
| P-HSR-ATR-PS-SEPT2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-ATR-PS-SEPT2.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-ATR-PS-SEPT2.45 | The A/B terminal labeling details shall be TBD |
| P-HSR-ATR-PS-SEPT2.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-ATR-PS-SEPT2.47 | The magnet polarity connections shall be TBD |
This function not yet implemented.