Requirement Details
Electron Ion Collider
G-ESR.05
Requirement details, history, relationships and interfaces associated with requirement G-ESR.05
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 05/16/2025 17:04 | |||
| Identifier: | G-ESR.05 | WBS: | 6.04 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | Approved | |
| Description: | The ESR electron beam shall orbit in the clockwise direction as seen from above. | ||
| Comments: | |||
| Record Date: 05/15/2025 20:34 | |||
| Identifier: | G-ESR.05 | WBS: | |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | ||
| Description: | The ESR electron beam shall orbit in the clockwise direction as seen from above. | ||
| Comments: | |||
| Record Date: 01/27/2025 16:43 | |||
| Identifier: | G-ESR.05 | WBS: | 6.04 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | Approved | |
| Description: | The ESR electron beam shall orbit in the clockwise direction as seen from above. | ||
| Comments: | |||
| Parents | |
| No parents. | |
| Children | |
| F-ESR-ARC.01 | The ESR lattice arc magnet structure shall contain an array of regular FODO cells |
| F-ESR-ARC.02 | The ESR lattice arc magnet structure shall consists of a quadrupole, a sextupole, a bending section, and a dipole corrector in each arc half-cell. |
| F-ESR-ARC.03 | The ESR lattice arc magnet structure shall accommodate slightly different average arc radii in the individual arcs by adjusting the drift spaces between individual elements in each FODO cell. |
| F-ESR-ARC.04 | The ESR beamline bending sections shall contain three individual dipole magnets, referred to as “super-bends”. |
| F-ESR-MAG.01 | The ESR magnets shall meet the requirements defined by the physics lattice. |
| F-ESR-MAG.02 | The ESR magnets shall have the required field quality to meet the operational needs. |
| F-ESR-MAG.03 | The “super-bends” in the ESR ARC sections shall consist of two long dipoles on either end of a short dipole. |
| F-ESR-MAG.04 | The good field region of the ESR dipoles shall extend over a horizontal range of at least 4 centimeters in the radial direction, for all operational beam energies from 5 to 18 GeV. This will take into account the orbit changes due to the reverse bends. |
| F-ESR-MAG.09 | All dipoles in the ESR, including those in IRs 6 and 8, shall be connected in series to a single main power supply. |
| F-ESR-MAG.07 | The aperture of all ESR magnets shall be large enough to accommodate the ESR vacuum chamber. |
| F-ESR-PS.01 | The ESR magnets shall be fed by a system of power supplies matched in voltage and maximum current to the specifications and requirements of the respective magnets |
This function not yet implemented.