Requirement Details
Electron Ion Collider
F-ESR.4
Requirement details, history, relationships and interfaces associated with requirement F-ESR.4
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 12/06/2024 11:10 | |||
| Identifier: | F-ESR.4 | WBS: | 6.04 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | The ESR alignment requirements are established by dynamic aperture and polarization tracking. The ESR RMS alignment tolerances shall be such that all the beam parameter listed in [5.9] can be satisfied. | ||
| Comments: | |||
No archive versions
| Parents | |
| G-ESR.1 | The ESR shall be able to accept single bunches of spin-polarized electrons as injected from the RCS at the energies specified in [10] |
| G-ESR.3 | The ESR shall provide electron bunches having the bunch parameters specified in [10]Â |
| Children | |
| P-ESR-MAG-CORR_H.1 | The magnet shall have a single function. |
| P-ESR-MAG-CORR_H.2 | The magnet shall require trim coils capable of trimming the field within +/- n (%) of the Peak field. |
| P-ESR-MAG-CORR_H.3 | The magnet shall not require current taps for operation. |
| P-ESR-MAG-CORR_H.4 | The magnet shall not require shunt(s) for operation. |
| P-ESR-MAG-CORR_H.5 | The magnet shall have a Dipole field. |
| P-ESR-MAG-CORR_H.6 | The magnet field shall have a vertical field direction. |
| P-ESR-MAG-CORR_H.7 | < blank > |
| P-ESR-MAG-CORR_H.8 | < blank > |
| P-ESR-MAG-CORR_H.9 | The magnet bore gap shall be 48 mm. |
| P-ESR-MAG-CORR_H.10 | The magnet good field aperture dAx required shall be 38.9222 mm. |
| P-ESR-MAG-CORR_H.11 | The magnet good field aperture dAy required shall be 11.4824 mm. |
| P-ESR-MAG-CORR_H.12 | The physical magnet length shall be <0.2 m. |
| P-ESR-MAG-CORR_H.13 | < blank > |
| P-ESR-MAG-CORR_H.14 | < blank > |
| P-ESR-MAG-CORR_H.15 | TBD |
| P-ESR-MAG-CORR_H.16 | < blank > |
| P-ESR-MAG-CORR_H.17 | < blank > |
| P-ESR-MAG-CORR_H.18 | The magnet to magnet field variability between magnets shall be <5x10^-3 %. |
| P-ESR-MAG-CORR_H.19 | The harmonic reference radius at the design energy of 18 GeV shall be R<TBDmm centererd at (0,0,0) . |
| P-ESR-MAG-CORR_H.20 | The Field at the reference radius at the design energy of 18 GeV shall be 60e-3 (T) . |
| P-ESR-MAG-CORR_H.21 | TBD |
| P-ESR-MAG-CORR_H.21.1 | b1 = 10000 (10^-4) |
| P-ESR-MAG-CORR_H.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-CORR_H.23 | < blank > |
| P-ESR-MAG-CORR_H.24 | < blank > |
| P-ESR-MAG-CORR_H.25 | < blank > |
| P-ESR-MAG-CORR_H.26 | < blank > |
| P-ESR-MAG-CORR_H.27 | < blank > |
| P-ESR-MAG-CORR_H.28 | < blank > |
| P-ESR-MAG-CORR_H.29 | < blank > |
| P-ESR-MAG-CORR_H.30 | < blank > |
| P-ESR-MAG-CORR_H.31 | < blank > |
| P-ESR-MAG-CORR_H.32 | The Bore multipole content shall have a 15th order of b15<100 (10^-4) |
| P-ESR-MAG-CORR_H.33 | The Bore multipole content shall have a 16th order of b16<100 (10^-4) |
| P-ESR-MAG-CORR_H.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-CORR_H.35 | < blank > |
| P-ESR-MAG-CORR_H.36 | < blank > |
| P-ESR-MAG-CORR_H.37 | < blank > |
| P-ESR-MAG-CORR_H.38 | < blank > |
| P-ESR-MAG-CORR_H.39 | < blank > |
| P-ESR-MAG-CORR_H.40 | < blank > |
| P-ESR-MAG-CORR_H.41 | < blank > |
| P-ESR-MAG-CORR_H.42 | < blank > |
| P-ESR-MAG-CORR_H.43 | < blank > |
| P-ESR-MAG-CORR_H.44 | < blank > |
| P-ESR-MAG-CORR_H.45 | < blank > |
| P-ESR-MAG-CORR_H.46 | < blank > |
| P-ESR-MAG-CORR_H.47 | < blank > |
| P-ESR-MAG-CORR_H.48 | < blank > |
| P-ESR-MAG-CORR_H.49 | < blank > |
| P-ESR-MAG-CORR_H.50 | < blank > |
| P-ESR-MAG-CORR_H.51 | < blank > |
| P-ESR-MAG-CORR_H.52 | < blank > |
| P-ESR-MAG-CORR_H.53 | < blank > |
| P-ESR-MAG-CORR_H.54 | < blank > |
| P-ESR-MAG-CORR_H.55 | The magnet shall not be designed to constain the external fringe field |
| P-ESR-MAG-CORR_H.56 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.1 | The magnet shall have a single function. |
| P-ESR-MAG-CORR_SPNQ_V.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-CORR_SPNQ_V.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-CORR_SPNQ_V.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-CORR_SPNQ_V.5 | The magnet shall have a Dipole field. |
| P-ESR-MAG-CORR_SPNQ_V.6 | The magnet field shall have a horizontal field direction. |
| P-ESR-MAG-CORR_SPNQ_V.9 | The magnet bore gap shall be 130.1 mm. |
| P-ESR-MAG-CORR_SPNQ_V.10 | The magnet good field aperture dAx required shall be 38.9222 mm. |
| P-ESR-MAG-CORR_SPNQ_V.11 | The magnet good field aperture dAy required shall be 22.2856 mm. |
| P-ESR-MAG-CORR_SPNQ_V.12 | The physical magnet length shall be <na m. |
| P-ESR-MAG-CORR_SPNQ_V.15 | TBD |
| P-ESR-MAG-CORR_SPNQ_V.18 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.19 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.20 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.21 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.21.1 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.21.2 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.21.3 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.21.4 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.21.5 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.21.6 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.21.7 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.21.8 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.21.9 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.21.10 | < blank > |
| P-ESR-MAG-CORR_SPNQ_V.21.11 | b11 < 100 (10^-4) |
| P-ESR-MAG-CORR_SPNQ_V.21.12 | b12 < 100 (10^-4) |
| P-ESR-MAG-CORR_SPNQ_V.21.13 | b13 < 100 (10^-4) |
| P-ESR-MAG-CORR_SPNQ_V.21.14 | b14 < 100 (10^-4) |
| P-ESR-MAG-CORR_SPNQ_V.21.15 | b15 < 100 (10^-4) |
| P-ESR-MAG-CORR_SPNQ_V.21.16 | b16 < 100 (10^-4) |
| P-ESR-MAG-CORR_SPNQ_V.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-CORR_SPNQ_V.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-CORR_SPNQ_V.28 | The magnet shall be designed to meet the following fringe field requirements TBD |
| P-ESR-MAG-CORR_SPNQ_V.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-CORR_SPNQ_V.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-CORR_SPNQ_V.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-CORR_V.1 | The magnet shall have a single function. |
| P-ESR-MAG-CORR_V.2 | The magnet shall require trim coils capable of trimming the field within +/- n (%) of the Peak field. |
| P-ESR-MAG-CORR_V.3 | The magnet shall not require current taps for operation. |
| P-ESR-MAG-CORR_V.4 | The magnet shall not require shunt(s) for operation. |
| P-ESR-MAG-CORR_V.5 | The magnet shall have a Dipole field. |
| P-ESR-MAG-CORR_V.6 | The magnet field shall have a horizontal field direction. |
| P-ESR-MAG-CORR_V.9 | The magnet bore gap shall be 130.1 mm. |
| P-ESR-MAG-CORR_V.10 | The magnet good field aperture dAx required shall be 29.2086 mm. |
| P-ESR-MAG-CORR_V.11 | The magnet good field aperture dAy required shall be 20.0738 mm. |
| P-ESR-MAG-CORR_V.12 | The physical magnet length shall be <0.2 m. |
| P-ESR-MAG-CORR_V.15 | TBD |
| P-ESR-MAG-CORR_V.18 | The magnet to magnet field variability between magnets shall be <5x10^-3 %. |
| P-ESR-MAG-CORR_V.19 | The harmonic reference radius at the design energy of 18 GeV shall be R<TBDmm centererd at (0,0,0) . |
| P-ESR-MAG-CORR_V.20 | The Field at the reference radius at the design energy of 18 GeV shall be 60e-3 (T) . |
| P-ESR-MAG-CORR_V.21 | TBD |
| P-ESR-MAG-CORR_V.21.1 | b1 = 10000 (10^-4) |
| P-ESR-MAG-CORR_V.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-D13.1 | The magnet shall have a single function. |
| P-ESR-MAG-D13.2 | The magnet shall be equipped with trim coils which are capable of trimming the field within +/-3.5 (%) of the Peak main bus field. (See figure P-ESR-MSG-D13.2-1) |
| P-ESR-MAG-D13.3 | To operate at a fixed bus current for 5GeV,10GeV and 18GeV the magnet shall be designed with current taps at turns 2,3,4,5,11,12,13,14,15 (See figure P-ESR-MSG-D13.3-1) |
| P-ESR-MAG-D13.5 | The magnet shall have a Dipole field. |
| P-ESR-MAG-D13.6 | The magnet field shall have a vertical field direction. |
| P-ESR-MAG-D13.9 | The magnet pole gap height and width shall be H=52 (mm), W=140(mm) |
| P-ESR-MAG-D13.12 | The physical magnet length shall be <2.73 (m). |
| P-ESR-MAG-D13.15 | The magnet shall be able to deliver an absolute nominal integrated dipole field ranging from Bmin=0(T.m) to Bmax=0.79(T.m) (See figure P-ESR-MSG-D13.15-1) |
| P-ESR-MAG-D13.18 | The magnet-to-magnet variability shall be < 0.1%. |
| P-ESR-MAG-D13.19 | The field shall be measured at 4 locations (see figure P-ESR-MSG-D13-19-1) as follows Harmonic Measurements region 1; Rref1=13mm centered at (-14,0) mm, Harmonic Measurements region 2; Rref2=13mm centered at (0,0) mm, Harmonic Measurements region 3; Rref3=13mm centered at (14,0), Relative field Measurements region 4; Relative to the central field at B(0,0), sampled in an Annulus 25mm>dRvol3>31mm |
| P-ESR-MAG-D13.20 | The reference field for the different design energies shall be Measurement 1; Bref1=0.07 (T) at R1 Measurement 2; Bref2=0.13 (T) at R2 Measurement 3; Bref3=0.284 (T) at R2 Measurement 4; Bref4=0.284(T) at R=0 |
| P-ESR-MAG-D13.21 | The magnet bore field shall have a field homogeneity in region 4, of better than dB/B<10-3 with respect to the central field at R(0,0) and shall meet the following harmonic multipole content in regions 1, 2 and 3. (Note: The following calculated multipoles values are given for reference radius of 17mm and centered on axis at x=0, y=0. *The multipole values need to be scaled accordingly in regions 1 and 3 with appropriate off axis values.) |
| P-ESR-MAG-D13.21.1 | *Region 1: b1 = 10000, Region 2: b1 = 10000, *Region 3: b1 = 10000, |
| P-ESR-MAG-D13.21.2 | *Region1: -4<b2<4, Region2: -4<b2<4, *Region3: -4<b2<4 |
| P-ESR-MAG-D13.21.3 | *Region 1: -0.5<b3<0.6, Region 2: -0.5<b3<0.6, *Region 3: -0.5<b3<0.6, |
| P-ESR-MAG-D13.21.4 | *Region 1: -1<b4< 0.5, Region 2: -1<b4< 0.5, *Region 3: -1<b4< 0.5 |
| P-ESR-MAG-D13.21.5 | *Region 1: -0.5<b5 <0.5, Region 2: -0.5<b5 <0.5, *Region 3: -0.5<b5 <0.5 |
| P-ESR-MAG-D13.21.6 | *Region 1: -0.5<b6 <0.5, Region 2: -0.5<b6 <0.5, *Region 3: -0.5<b6 <0.5 |
| P-ESR-MAG-D13.21.7 | *Region 1: -0.5<b7 <0.5, Region 2: -0.5<b7 <0.5, *Region 3: -0.5<b7 <0.5 |
| P-ESR-MAG-D13.21.8 | *Region 1: -0.5<b8 <0.5, Region 2: -0.5<b8 <0.5, *Region 3: -0.5<b8 <0.5 |
| P-ESR-MAG-D13.21.9 | *Region 1: -0.5<b9 <0.5, Region 2: -0.5<b9 <0.5, *Region 3: -0.5<b9 <0.5 |
| P-ESR-MAG-D13.21.10 | *Region 1: -0.5<b10 <0.5, Region 2: -0.5<b10 <0.5, *Region 3: -0.5<b10 <0.5 |
| P-ESR-MAG-D13.21.11 | *Region 1: -0.5<b11 <0.5, Region 2: -0.5<b11 <0.5, *Region 3: -0.5<b11 <0.5 |
| P-ESR-MAG-D13.21.12 | *Region 1: -0.5<b12 <0.5, Region 2: -0.5<b12 <0.5, *Region 3: -0.5<b12 <0.5 |
| P-ESR-MAG-D13.21.13 | *Region 1: -0.5<b13 <0.5, Region 2: -0.5<b13 <0.5, *Region 3: -0.5<b13 <0.5 |
| P-ESR-MAG-D13.21.14 | *Region 1: -0.5<b14 <0.5, Region 2: -0.5<b14 <0.5, *Region 3: -0.5<b14 <0.5 |
| P-ESR-MAG-D13.21.15 | *Region 1: -0.5<b15 <0.5, Region2: -0.5<b15 <0.5, *Region 3: -0.5<b15 <0.5 |
| P-ESR-MAG-D13.21.16 | *Region 1: -0.5<b16 <0.5, Region2: -0.5<b16 <0.5, *Region 3: -0.5<b16 <0.5 |
| P-ESR-MAG-D13.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-D13.23 | < Requirement Not Applicable > |
| P-ESR-MAG-D13.24 | < Requirement Not Applicable > |
| P-ESR-MAG-D13.25 | < Requirement Not Applicable > |
| P-ESR-MAG-D13.26 | < Requirement Not Applicable > |
| P-ESR-MAG-D13.27 | The magnet shall be designed to constrain the external fringe field. |
| P-ESR-MAG-D13.28 | The magnet fringe field shall not exceed 10 Gauss at a radial distance greater than 900mm from the magnet centerline |
| P-ESR-MAG-D13.29 | Magnetic field position and alignment within the magnet, the magnetic field, center and alignment, within the magnet must be known to within a translational value of +/-50 (um) and a rotational alignment value of +/-0.5(mrad). |
| P-ESR-MAG-D13.31 | Magnet installation tolerances, the magnet install center and install alignment must be within a translational value of +/-150(um) and a rotational alignment value of +/-0.5(mrad). |
| P-ESR-MAG-D13.46 | The magnet design and verification process shall ensure the final magnet will meet the reliability needs of the EIC over it planned operational life of >20 Years. |
| P-ESR-MAG-D13.47 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC >20 Years. |
| P-ESR-MAG-D2.1 | The magnet shall have a single function. |
| P-ESR-MAG-D2.2 | The magnet shall be equipped with trim coils which are capable of trimming the field within +/- 2.8(%) of the Peak main bus field. (See figure P-ESR-MSG-D2.2-1) |
| P-ESR-MAG-D2.3 | To operate at a fixed bus current for 5GeV,10GeV and 18GeV the magnet shall be designed with current taps at turns 1,2,5,11,12,13. (See figure P-ESR-MSG-D2.3-1) |
| P-ESR-MAG-D2.5 | The magnet shall have a Dipole field. |
| P-ESR-MAG-D2.6 | The magnet field shall have a vertical field direction. |
| P-ESR-MAG-D2.9 | The magnet pole gap height and width shall be H=52 (mm), W=140(mm). |
| P-ESR-MAG-D2.10 | The magnet good field aperture dAx required shall be 35.0345 mm. |
| P-ESR-MAG-D2.12 | The physical magnet length shall be <1.13 (m). |
| P-ESR-MAG-D2.15 | The magnet shall be able to deliver an absolute nominal integrated dipole field ranging from Bmin=0(T.m) to Bmax=0.33(T.m). (See figure P-ESR-MSG-D2.15-1) |
| P-ESR-MAG-D2.18 | The magnet-to-magnet variability shall be < 0.1%. |
| P-ESR-MAG-D2.19 | The field shall be measured at 4 locations (See figure P-ESR-MSG-D2.19-1) as follows Harmonic Measurements region 1; Rref1=13mm centered at (-14,0) mm, Harmonic Measurements region 2; Rref2=13mm centered at (0,0) mm, Harmonic Measurements region 3; Rref3=13mm centered at (14,0), Relative field Measurements region 4; Relative to the central field at B(0,0), sampled in an Annulus 25mm>dRvol3>31mm |
| P-ESR-MAG-D2.20 | The reference field for the different measurements shall be Measurement 1; Bref1=-0.375 (T) in Region1, Region2 and Region3 Measurement 2; Bref2=0.12 (T) in Region1, Region2 and Region3 Measurement 3; Bref2=0.23 (T) in Region1, Region2 and Region3 Measurement 3; Bref3=0.23 (T) in Region4 |
| P-ESR-MAG-D2.21 | The magnet bore field shall have a field homogeneity in region 4, of better than dB/B<10-3 with respect to the central field at R(0,0) and shall meet the following harmonic multipole content in regions 1, 2 and 3. (Note: The following calculated multipoles values are given for reference radius of 17mm and centered on axis at x=0, y=0. *The multipole values need to be scaled accordingly in regions 1 and 3 with appropriate off axis values.) |
| P-ESR-MAG-D2.21.1 | *Region1: b1 = 10000, Region2: b1 = 10000, *Region3: b1 = 10000 |
| P-ESR-MAG-D2.21.2 | *Region 1: -6<b2<6, Region 2: -6<b2<6, *Region 3: -6<b2<6 |
| P-ESR-MAG-D2.21.3 | *Region1: -0.5<b3<0.6, Region2: -0.5<b3<0.6, *Region3: -0.5<b3<0.6 |
| P-ESR-MAG-D2.21.4 | *Region1: -1<b4< 0.5, Region2: -1<b4< 0.5, *Region 3: -1<b4< 0.5 |
| P-ESR-MAG-D2.21.5 | *Region 1: -0.5<b5 <0.5, Region 2: -0.5<b5 <0.5, *Region 3: -0.5<b5 <0.5 |
| P-ESR-MAG-D2.21.6 | *Region 1: -0.5<b6 <0.5, Region 2: -0.5<b6 <0.5, *Region 3: -0.5<b6 <0.5 |
| P-ESR-MAG-D2.21.7 | *Region 1: -0.5<b7 <0.5, Region 2: -0.5<b7 <0.5, *Region 3: -0.5<b7 <0.5 |
| P-ESR-MAG-D2.21.8 | *Region 1: -0.5<b8 <0.5, Region 2: -0.5<b8 <0.5, *Region 3: -0.5<b8 <0.5 |
| P-ESR-MAG-D2.21.9 | *Region 1: -0.5<b9 <0.5, Region 2: -0.5<b9 <0.5, *Region 3: -0.5<b9 <0.5 |
| P-ESR-MAG-D2.21.10 | *Region 1: -0.5<b10 <0.5, Region 2: -0.5<b10 <0.5, *Region 3: -0.5<b10 <0.5 |
| P-ESR-MAG-D2.21.11 | *Region 1: -0.5<b11 <0.5, Region 2: -0.5<b11 <0.5, *Region 3: -0.5<b11 <0.5 |
| P-ESR-MAG-D2.21.12 | *Region 1: -0.5<b12 <0.5, Region 2: -0.5<b12 <0.5, *Region 3: -0.5<b12 <0.5 |
| P-ESR-MAG-D2.21.13 | *Region 1: -0.5<b13 <0.5, Region 2: -0.5<b13 <0.5, *Region 3: -0.5<b13 <0.5 |
| P-ESR-MAG-D2.21.14 | *Region 1: -0.5<b14 <0.5, Region 2: -0.5<b14 <0.5, *Region 3: -0.5<b14 <0.5 |
| P-ESR-MAG-D2.21.15 | *Region 1: -0.5<b15 <0.5, Region 2: -0.5<b15 <0.5, *Region 3: -0.5<b15 <0.5 |
| P-ESR-MAG-D2.21.16 | *Region 1: -0.5<b16 <0.5, Region 2: -0.5<b16 <0.5, *Region 3: -0.5<b16 <0.5 |
| P-ESR-MAG-D2.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-D2.27 | The magnet shall be designed to constrain the external fringe field |
| P-ESR-MAG-D2.28 | The magnet fringe field shall not exceed 10 Gauss at a radial distance greater than 900mm from the magnet centerline |
| P-ESR-MAG-D2.29 | Magnetic field position and alignment within the magnet, the magnetic field, center and alignment, within the magnet must be known to within a translational value of +/-50 (um) and a rotational alignment value of +/-0.5(mrad). |
| P-ESR-MAG-D2.31 | Magnet installation tolerances, the magnet install center and install alignment must be within a translational value of +/-150(um) and a rotational alignment value of +/-0.5(mrad). |
| P-ESR-MAG-D2.46 | The magnet design and verification process shall ensure the final magnet will meet the reliability needs of the EIC over it planned operational life of >20 Years. |
| P-ESR-MAG-D2.47 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of >20 Years. |
| P-ESR-MAG-D_SR.1 | The magnet shall have a single function. |
| P-ESR-MAG-D_SR.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-D_SR.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-D_SR.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-D_SR.5 | The magnet shall have a Dipole field. |
| P-ESR-MAG-D_SR.6 | The magnet field shall have a vertical field direction. |
| P-ESR-MAG-D_SR.9 | The magnet bore gap shall be 48 mm. |
| P-ESR-MAG-D_SR.10 | The magnet good field aperture dAx required shall be 38.378 mm. |
| P-ESR-MAG-D_SR.11 | The magnet good field aperture dAy required shall be 14.6869 mm. |
| P-ESR-MAG-D_SR.12 | The physical magnet length shall be <3.8 m. |
| P-ESR-MAG-D_SR.13 | The magnet model length shall be 3.8 m. |
| P-ESR-MAG-D_SR.15 | The magnet integrated dipole field B shall be 1.1628 T.m. |
| P-ESR-MAG-D_SR.18 | The magnet to magnet field variability between magnets shall be TBD %. |
| P-ESR-MAG-D_SR.19 | The harmonic reference radius at the design energy of 18 GeV shall be TBD (mm) . |
| P-ESR-MAG-D_SR.20 | The Field at the reference radius at the design energy of 18 GeV shall be TBD (T) . |
| P-ESR-MAG-D_SR.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-D_SR.21.1 | b1 = 10000 (10^-4) |
| P-ESR-MAG-D_SR.21.2 | b2 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.3 | b3 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.4 | b4 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.5 | b5 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.6 | b6 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.7 | b7 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.8 | b8 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.9 | b9 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.10 | b10 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.11 | b11 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.12 | b12 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.13 | b13 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.14 | b14 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.15 | b15 < 1 (10^-4) |
| P-ESR-MAG-D_SR.21.16 | b16 < 1 (10^-4) |
| P-ESR-MAG-D_SR.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-D_SR.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-D_SR.28 | The magnet shall be designed to meet the following fringe field requirements TBD |
| P-ESR-MAG-D_SR.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-D_SR.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-D_SR.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-Q50.1 | The magnet shall have a single function. |
| P-ESR-MAG-Q50.4 | The magnet shall require shunt resistors for beam-based alignment , 5A at 5 GeV ( Y or N) |
| P-ESR-MAG-Q50.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-Q50.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-Q50.8 | The magnet pole tip radius shall be 40 mm. |
| P-ESR-MAG-Q50.12 | The physical magnet length shall be <0.5 m. |
| P-ESR-MAG-Q50.13 | The magnet model length shall be 0.5 m. |
| P-ESR-MAG-Q50.16 | The magnet integrated grad field G shall be 15.774 T/m.m. |
| P-ESR-MAG-Q50.19 | The harmonic reference radius at the design energy of 18 GeV shall be 25 (mm) . |
| P-ESR-MAG-Q50.20 | The Field at the reference radius at the design energy of 18 GeV shall be 18.9 (T/m) . |
| P-ESR-MAG-Q50.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-Q50.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-Q50.21.3 | -4.45 < b3 < 0.01 (10^-4) |
| P-ESR-MAG-Q50.21.4 | -5.3 < b4 < -0.4 (10^-4) |
| P-ESR-MAG-Q50.21.5 | -0.65 < b5 < 0.18 (10^-4) |
| P-ESR-MAG-Q50.21.6 | -3.57 < b6 < -2.86 (10^-4) |
| P-ESR-MAG-Q50.21.7 | -1.50 < b7 < 1.50 (10^-4) |
| P-ESR-MAG-Q50.21.8 | -1.50 < b8 < 1.50 (10^-4) |
| P-ESR-MAG-Q50.21.9 | -1.50 < b9 < 1.50 (10^-4) |
| P-ESR-MAG-Q50.21.10 | -1.93 < b10 < -1.88 (10^-4) |
| P-ESR-MAG-Q50.21.11 | -1.50 < b11 < 1.50 (10^-4) |
| P-ESR-MAG-Q50.21.12 | -1.50 < b12 < 1.50 (10^-4) |
| P-ESR-MAG-Q50.21.13 | -1.50 < b13 < 1.50 (10^-4) |
| P-ESR-MAG-Q50.21.14 | -0.18 < b14 < -0.16 (10^-4) |
| P-ESR-MAG-Q50.27 | The magnet shall be designed to specifically constrain the external fringe field N (Yes or No) |
| P-ESR-MAG-Q50.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-Q50.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-Q50.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-Q50.46 | < blank > |
| P-ESR-MAG-Q50.47 | < blank > |
| P-ESR-MAG-Q60.1 | The magnet shall have a single function. |
| P-ESR-MAG-Q60.4 | The magnet shall require shunt resistors for beam-based alignment , 5A at 5 GeV ( Y or N) |
| P-ESR-MAG-Q60.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-Q60.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-Q60.8 | The magnet pole tip radius shall be 40 mm. |
| P-ESR-MAG-Q60.12 | The physical magnet length shall be <0.6 m. |
| P-ESR-MAG-Q60.13 | The magnet model length shall be 0.6 m. |
| P-ESR-MAG-Q60.16 | The magnet integrated grad field G shall be 6.975 T/m.m. |
| P-ESR-MAG-Q60.19 | The harmonic reference radius at the design energy of 18 GeV shall be 25 (mm) . |
| P-ESR-MAG-Q60.20 | The Field at the reference radius at the design energy of 18 GeV shall be 18.9 (T/m) . |
| P-ESR-MAG-Q60.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-Q60.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-Q60.21.3 | -3.71 < b3 < -0.27 (10^-4) |
| P-ESR-MAG-Q60.21.4 | -4.77 < b4 < 0.01 (10^-4) |
| P-ESR-MAG-Q60.21.5 | -0.69 < b5 < 0.07 (10^-4) |
| P-ESR-MAG-Q60.21.6 | -3.18 < b6 < -2.56 (10^-4) |
| P-ESR-MAG-Q60.21.7 | -1.50 < b7 < 1.50 (10^-4) |
| P-ESR-MAG-Q60.21.8 | -1.50 < b8 < 1.50 (10^-4) |
| P-ESR-MAG-Q60.21.9 | -1.50 < b9 < 1.50 (10^-4) |
| P-ESR-MAG-Q60.21.10 | -1.92 < b10 < -1.52 (10^-4) |
| P-ESR-MAG-Q60.21.11 | -1.50 < b11 < 1.50 (10^-4) |
| P-ESR-MAG-Q60.21.12 | -1.50 < b12 < 1.50 (10^-4) |
| P-ESR-MAG-Q60.21.13 | -1.50 < b13 < 1.50 (10^-4) |
| P-ESR-MAG-Q60.21.14 | -0.22 < b14 < -0.18 (10^-4) |
| P-ESR-MAG-Q60.27 | The magnet shall be designed to specifically constrain the external fringe field N (Yes or No) |
| P-ESR-MAG-Q60.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-Q60.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-Q60.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-Q60.46 | < blank > |
| P-ESR-MAG-Q60.47 | < blank > |
| P-ESR-MAG-Q60x2.1 | The magnet shall have a single function. |
| P-ESR-MAG-Q60x2.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-Q60x2.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-Q60x2.8 | The magnet pole tip radius shall be 67.8823 mm. |
| P-ESR-MAG-Q60x2.10 | The magnet good field aperture dAx required shall be 40.4255 mm. |
| P-ESR-MAG-Q60x2.11 | The magnet good field aperture dAy required shall be 20.4007 mm. |
| P-ESR-MAG-Q60x2.12 | The physical magnet length shall be <1.2 m. |
| P-ESR-MAG-Q60x2.13 | The magnet model length shall be 1.2 m. |
| P-ESR-MAG-Q60x2.16 | The magnet integrated grad field G shall be 24.6612 T/m.m. |
| P-ESR-MAG-Q60x2.18 | The magnet to magnet field variability between magnets shall be within the APS spec %. |
| P-ESR-MAG-Q60x2.19 | The harmonic reference radius at the design energy of 18 GeV shall be 25 (mm) (mm,A). |
| P-ESR-MAG-Q60x2.20 | The Field at the reference radius at the design energy of 18 GeV shall be 18.9 (T/m) . |
| P-ESR-MAG-Q60x2.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-Q60x2.21.1 | b1 < 1 (10^-4) |
| P-ESR-MAG-Q60x2.21.2 | b2 < 1 (10^-4) |
| P-ESR-MAG-Q60x2.21.3 | b3 = 10000 (10^-4) |
| P-ESR-MAG-Q60x2.21.4 | -4.15 < b4 < 5.66 (10^-4) |
| P-ESR-MAG-Q60x2.21.5 | -1.97 < b5 < 0.82 (10^-4) |
| P-ESR-MAG-Q60x2.21.6 | -1.50 < b6 < 1.50 (10^-4) |
| P-ESR-MAG-Q60x2.21.7 | -0.12 < b7 < 0.54 (10^-4) |
| P-ESR-MAG-Q60x2.21.8 | -1.50 < b8 < 1.50 (10^-4) |
| P-ESR-MAG-Q60x2.21.9 | -12.67 < b9 < -12.52 (10^-4) |
| P-ESR-MAG-Q60x2.21.10 | -1.50 < b10 < 1.50 (10^-4) |
| P-ESR-MAG-Q60x2.21.11 | -1.50 < b11 < 1.50 (10^-4) |
| P-ESR-MAG-Q60x2.21.12 | -1.50 < b12 < 1.50 (10^-4) |
| P-ESR-MAG-Q60x2.21.13 | -1.50 < b13 < 1.50 (10^-4) |
| P-ESR-MAG-Q60x2.21.14 | -1.50 < b14 < 1.50 (10^-4) |
| P-ESR-MAG-Q60x2.21.15 | -0.47 < b15 < -0.46 (10^-4) |
| P-ESR-MAG-Q60x2.21.16 | -1.50 < b16 < 1.50 (10^-4) |
| P-ESR-MAG-Q60x2.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-Q60x2.23 | The magnet xtalk shall be constrained as described ; within the APS spec |
| P-ESR-MAG-Q60x2.27 | The magnet shall be designed to specifically constrain the external fringe field N (Yes or No) |
| P-ESR-MAG-Q60x2.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-Q60x2.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-Q60x2.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-Q80.1 | The magnet shall have a single function. |
| P-ESR-MAG-Q80.4 | The magnet shall require shunt resistors for beam-based alignment , 5A at 5 GeV ( Y or N) |
| P-ESR-MAG-Q80.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-Q80.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-Q80.8 | The magnet pole tip radius shall be 40 mm. |
| P-ESR-MAG-Q80.12 | The physical magnet length shall be <0.8 m. |
| P-ESR-MAG-Q80.13 | The magnet model length shall be 0.8 m. |
| P-ESR-MAG-Q80.16 | The magnet integrated grad field G shall be 16 T/m.m. |
| P-ESR-MAG-Q80.19 | The harmonic reference radius at the design energy of 18 GeV shall be 25 (mm) . |
| P-ESR-MAG-Q80.20 | The Field at the reference radius at the design energy of 18 GeV shall be 18.9 (T/m) . |
| P-ESR-MAG-Q80.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-Q80.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-Q80.21.3 | -4.45 < b3 < 0.59 (10^-4) |
| P-ESR-MAG-Q80.21.4 | -3.92 < b4 < 0.5 (10^-4) |
| P-ESR-MAG-Q80.21.5 | -0.55 < b5 < 0.14 (10^-4) |
| P-ESR-MAG-Q80.21.6 | -3.85 < b6 < -3.01 (10^-4) |
| P-ESR-MAG-Q80.21.7 | -1.50 < b7 < 1.50 (10^-4) |
| P-ESR-MAG-Q80.21.8 | -1.50 < b8 < 1.50 (10^-4) |
| P-ESR-MAG-Q80.21.9 | -1.50 < b9 < 1.50 (10^-4) |
| P-ESR-MAG-Q80.21.10 | -1.01 < b10 < -0.98 (10^-4) |
| P-ESR-MAG-Q80.21.11 | -1.50 < b11 < 1.50 (10^-4) |
| P-ESR-MAG-Q80.21.12 | -1.50 < b12 < 1.50 (10^-4) |
| P-ESR-MAG-Q80.21.13 | -1.50 < b12 < 1.50 (10^-4) |
| P-ESR-MAG-Q80.21.14 | -0.26 < b14 < -0.2 (10^-4) |
| P-ESR-MAG-Q80.27 | The magnet shall be designed to specifically constrain the external fringe field N (Yes or No) |
| P-ESR-MAG-Q80.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-Q80.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-Q80.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-Q80.46 | < blank > |
| P-ESR-MAG-Q80.47 | < blank > |
| P-ESR-MAG-Q_LA.1 | The magnet shall have a single function. |
| P-ESR-MAG-Q_LA.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-Q_LA.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-Q_LA.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-Q_LA.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-Q_LA.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-Q_LA.8 | The magnet pole tip radius shall be 80 mm. |
| P-ESR-MAG-Q_LA.10 | The magnet good field aperture dAx required shall be 37.2044 mm. |
| P-ESR-MAG-Q_LA.11 | The magnet good field aperture dAy required shall be 12.032 mm. |
| P-ESR-MAG-Q_LA.12 | The physical magnet length shall be <1.2 m. |
| P-ESR-MAG-Q_LA.13 | The magnet model length shall be 1.2 m. |
| P-ESR-MAG-Q_LA.16 | The magnet integrated grad field G shall be 9.7224 T/m.m. |
| P-ESR-MAG-Q_LA.18 | The magnet to magnet field variability between magnets shall be TBD %. |
| P-ESR-MAG-Q_LA.19 | The harmonic reference radius at the design energy of 18 GeV shall be 53 (mm) . |
| P-ESR-MAG-Q_LA.20 | The Field at the reference radius at the design energy of 18 GeV shall be 18.9 (T/m) . |
| P-ESR-MAG-Q_LA.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-Q_LA.21.1 | b1 = b1 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-Q_LA.21.3 | b3 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.21.4 | -0.53 < b5 < 0.23 (10^-4) |
| P-ESR-MAG-Q_LA.21.5 | b5 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.21.6 | b6 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.21.7 | b7 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.21.8 | b8 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.21.9 | b9 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.21.10 | b10 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.21.11 | b11 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.21.12 | b12 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.21.13 | b13 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.21.14 | b14 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.21.15 | b15 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.21.16 | b16 < 1 (10^-4) |
| P-ESR-MAG-Q_LA.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-Q_LA.27 | The magnet shall be designed to specifically constrain the external fringe field N (Yes or No) |
| P-ESR-MAG-Q_LA.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-Q_LA.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-Q_LA.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-Q_NARROW.1 | The magnet shall have a single function. |
| P-ESR-MAG-Q_NARROW.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-Q_NARROW.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-Q_NARROW.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-Q_NARROW.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-Q_NARROW.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-Q_NARROW.8 | The magnet pole tip radius shall be 67.8823 mm. |
| P-ESR-MAG-Q_NARROW.10 | TBD |
| P-ESR-MAG-Q_NARROW.11 | TBD |
| P-ESR-MAG-Q_NARROW.12 | The physical magnet length shall be <TBD m. |
| P-ESR-MAG-Q_NARROW.13 | The magnet model length shall be TBD m. |
| P-ESR-MAG-Q_NARROW.16 | TBD |
| P-ESR-MAG-Q_NARROW.18 | The magnet to magnet field variability between magnets shall be TBD %. |
| P-ESR-MAG-Q_NARROW.19 | The harmonic reference radius at the design energy of 18 GeV shall be TBD (mm) . |
| P-ESR-MAG-Q_NARROW.20 | The Field at the reference radius at the design energy of 18 GeV shall be TBD (T/m) . |
| P-ESR-MAG-Q_NARROW.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-Q_NARROW.21.1 | b1 = b1 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.3 | b3 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.4 | -0.45 < b5 < 0.25 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.5 | b5 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.6 | b6 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.7 | b7 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.8 | b8 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.9 | b9 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.10 | b10 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.11 | b11 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.12 | b12 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.13 | b13 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.14 | b14 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.15 | b15 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.21.16 | b16 < 1 (10^-4) |
| P-ESR-MAG-Q_NARROW.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-Q_NARROW.26.1 | The magnet shall require the following cross talk multipole content. TBD T |
| P-ESR-MAG-Q_NARROW.26.2 | b1 TBD T |
| P-ESR-MAG-Q_NARROW.26.3 | b2 TBD T |
| P-ESR-MAG-Q_NARROW.26.4 | b4 TBD T |
| P-ESR-MAG-Q_NARROW.26.5 | b5 TBD T |
| P-ESR-MAG-Q_NARROW.26.6 | b6 TBD T |
| P-ESR-MAG-Q_NARROW.26.7 | b7 TBD T |
| P-ESR-MAG-Q_NARROW.26.8 | b8 TBD T |
| P-ESR-MAG-Q_NARROW.26.9 | b9 TBD T |
| P-ESR-MAG-Q_NARROW.26.10 | b10 TBD T |
| P-ESR-MAG-Q_NARROW.26.11 | b11 TBD T |
| P-ESR-MAG-Q_NARROW.26.12 | b12 TBD T |
| P-ESR-MAG-Q_NARROW.26.13 | b13 TBD T |
| P-ESR-MAG-Q_NARROW.26.14 | b14 TBD T |
| P-ESR-MAG-Q_NARROW.26.15 | b15 TBD T |
| P-ESR-MAG-Q_NARROW.26.16 | b16 TBD T |
| P-ESR-MAG-Q_NARROW.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-Q_NARROW.28 | The magnet shall be designed to meet the following fringe field requirements TBD |
| P-ESR-MAG-Q_NARROW.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-Q_NARROW.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-Q_NARROW.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-Q_SKEW.1 | The magnet shall have a single function. |
| P-ESR-MAG-Q_SKEW.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-Q_SKEW.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-Q_SKEW.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-Q_SKEW.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-Q_SKEW.7 | The magnet shall have a skew field rotation. |
| P-ESR-MAG-Q_SKEW.8 | The magnet pole tip radius shall be 67.8823 mm. |
| P-ESR-MAG-Q_SKEW.10 | The magnet good field aperture dAx required shall be 38.1449 mm. |
| P-ESR-MAG-Q_SKEW.11 | The magnet good field aperture dAy required shall be 15.2055 mm. |
| P-ESR-MAG-Q_SKEW.12 | The physical magnet length shall be <0.25 m. |
| P-ESR-MAG-Q_SKEW.13 | The magnet model length shall be 0.25 m. |
| P-ESR-MAG-Q_SKEW.16 | The magnet integrated grad field G shall be 0 T/m.m. |
| P-ESR-MAG-Q_SKEW.18 | The magnet to magnet field variability between magnets shall be TBD %. |
| P-ESR-MAG-Q_SKEW.19 | The harmonic reference radius at the design energy of 18 GeV shall be TBD (mm) . |
| P-ESR-MAG-Q_SKEW.20 | The field at the reference radius at the design energy of 18 GeV shall be TBD (T/m) . |
| P-ESR-MAG-Q_SKEW.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-Q_SKEW.21.1 | b1 = b1 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.3 | b3 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.4 | -1.96 < b6 < -1.26 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.5 | b5 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.6 | b6 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.7 | b7 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.8 | b8 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.9 | b9 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.10 | b10 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.11 | b11 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.12 | b12 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.13 | b13 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.14 | b14 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.15 | b15 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.21.16 | b16 < 1 (10^-4) |
| P-ESR-MAG-Q_SKEW.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-Q_SKEW.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-Q_SKEW.28 | The magnet shall be designed to meet the following fringe field requirements TBD |
| P-ESR-MAG-Q_SKEW.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-Q_SKEW.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-Q_SKEW.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-QLS1.1 | The magnet shall have a single function. |
| P-ESR-MAG-QLS1.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-QLS1.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-QLS1.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-QLS1.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-QLS1.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-QLS1.8 | The magnet pole tip radius shall be 67.8823 mm. |
| P-ESR-MAG-QLS1.10 | The magnet good field aperture dAx required shall be 36.1704 mm. |
| P-ESR-MAG-QLS1.11 | The magnet good field aperture dAy required shall be 13.9485 mm. |
| P-ESR-MAG-QLS1.12 | The physical magnet length shall be <0.491 m. |
| P-ESR-MAG-QLS1.13 | The magnet model length shall be 0.491 m. |
| P-ESR-MAG-QLS1.16 | The magnet integrated grad field G shall be 13.1004 T/m.m. |
| P-ESR-MAG-QLS1.18 | The magnet to magnet field variability between magnets shall be TBD %. |
| P-ESR-MAG-QLS1.19 | The harmonic reference radius at the design energy of 18 GeV shall be TBD (mm) . |
| P-ESR-MAG-QLS1.20 | The Field at the reference radius at the design energy of 18 GeV shall be TBD (T/m) . |
| P-ESR-MAG-QLS1.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-QLS1.21.1 | b1 = b1 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-QLS1.21.3 | b3 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.4 | b4 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.5 | b5 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.6 | b6 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.7 | b7 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.8 | b8 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.9 | b9 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.10 | b10 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.11 | b11 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.12 | b12 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.13 | b13 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.14 | b14 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.15 | b15 < 1 (10^-4) |
| P-ESR-MAG-QLS1.21.16 | b16 < 1 (10^-4) |
| P-ESR-MAG-QLS1.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-QLS1.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-QLS1.28 | The magnet shall be designed to meet the following fringe field requirements TBD |
| P-ESR-MAG-QLS1.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-QLS1.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-QLS1.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-QLS2.1 | The magnet shall have a single function. |
| P-ESR-MAG-QLS2.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-QLS2.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-QLS2.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-QLS2.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-QLS2.6 | < blank > |
| P-ESR-MAG-QLS2.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-QLS2.8 | The magnet pole tip radius shall be 67.8823 mm. |
| P-ESR-MAG-QLS2.9 | < blank > |
| P-ESR-MAG-QLS2.10 | The magnet good field aperture dAx required shall be 28.3283 mm. |
| P-ESR-MAG-QLS2.11 | The magnet good field aperture dAy required shall be 17.6468 mm. |
| P-ESR-MAG-QLS2.12 | The physical magnet length shall be <0.9 m. |
| P-ESR-MAG-QLS2.13 | The magnet model length shall be 0.9 m. |
| P-ESR-MAG-QLS2.14 | < blank > |
| P-ESR-MAG-QLS2.15 | < blank > |
| P-ESR-MAG-QLS2.16 | The magnet integrated grad field G shall be 19.5831 T/m.m. |
| P-ESR-MAG-QLS2.17 | < blank > |
| P-ESR-MAG-QLS2.18 | The magnet to magnet field variability between magnets shall be TBD %. |
| P-ESR-MAG-QLS2.19 | The harmonic reference radius at the design energy of 18 GeV shall be TBD (mm) . |
| P-ESR-MAG-QLS2.20 | The field at the reference radius at the design energy of 18 GeV shall be TBD (T/m) . |
| P-ESR-MAG-QLS2.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-QLS2.21.1 | b1 = b1 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-QLS2.21.3 | b3 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.4 | b4 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.5 | b5 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.6 | b6 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.7 | b7 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.8 | b8 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.9 | b9 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.10 | b10 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.11 | b11 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.12 | b12 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.13 | b13 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.14 | b14 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.15 | b15 < 1 (10^-4) |
| P-ESR-MAG-QLS2.21.16 | b16 < 1 (10^-4) |
| P-ESR-MAG-QLS2.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-QLS2.23 | < blank > |
| P-ESR-MAG-QLS2.24 | < blank > |
| P-ESR-MAG-QLS2.25 | < blank > |
| P-ESR-MAG-QLS2.26 | < blank > |
| P-ESR-MAG-QLS2.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-QLS2.28 | The magnet shall be designed to meet the following fringe field requirements TBD |
| P-ESR-MAG-QLS2.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-QLS2.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-QLS2.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-QLS2.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-QLS2.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-QLS2.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-QLS2.35 | < blank > |
| P-ESR-MAG-QLS2.36 | < blank > |
| P-ESR-MAG-QLS2.37 | < blank > |
| P-ESR-MAG-QLS2.38 | < blank > |
| P-ESR-MAG-QLS2.39 | < blank > |
| P-ESR-MAG-QLS2.40 | < blank > |
| P-ESR-MAG-QLS2.41 | < blank > |
| P-ESR-MAG-QLS2.42 | < blank > |
| P-ESR-MAG-QLS2.43 | < blank > |
| P-ESR-MAG-QLS2.44 | < blank > |
| P-ESR-MAG-QLS2.45 | < blank > |
| P-ESR-MAG-QLS2.46 | < blank > |
| P-ESR-MAG-QLS2.47 | < blank > |
| P-ESR-MAG-QLS2.48 | < blank > |
| P-ESR-MAG-QLS2.49 | < blank > |
| P-ESR-MAG-QLS2.50 | < blank > |
| P-ESR-MAG-QLS2.51 | < blank > |
| P-ESR-MAG-QLS2.52 | < blank > |
| P-ESR-MAG-QLS2.53 | < blank > |
| P-ESR-MAG-QLS2.54 | < blank > |
| P-ESR-MAG-QLS2.55 | The magnet shall not be designed to constain the external fringe field |
| P-ESR-MAG-QLS2.56 | < blank > |
| P-ESR-MAG-QLS3.1 | The magnet shall have a single function. |
| P-ESR-MAG-QLS3.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-QLS3.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-QLS3.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-QLS3.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-QLS3.6 | < blank > |
| P-ESR-MAG-QLS3.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-QLS3.8 | The magnet pole tip radius shall be 67.8823 mm. |
| P-ESR-MAG-QLS3.9 | < blank > |
| P-ESR-MAG-QLS3.10 | The magnet good field aperture dAx required shall be 23.3244 mm. |
| P-ESR-MAG-QLS3.11 | The magnet good field aperture dAy required shall be 9.8246 mm. |
| P-ESR-MAG-QLS3.12 | The physical magnet length shall be <0.259 m. |
| P-ESR-MAG-QLS3.13 | The magnet model length shall be 0.259 m. |
| P-ESR-MAG-QLS3.14 | < blank > |
| P-ESR-MAG-QLS3.15 | < blank > |
| P-ESR-MAG-QLS3.16 | The magnet integrated grad field G shall be 6.1329 T/m.m. |
| P-ESR-MAG-QLS3.17 | < blank > |
| P-ESR-MAG-QLS3.18 | The magnet to magnet field variability between magnets shall be within the APS spec %. |
| P-ESR-MAG-QLS3.19 | The harmonic reference radius at the design energy of 18 GeV shall be 25 (mm) . |
| P-ESR-MAG-QLS3.20 | The field at the reference radius at the design energy of 18 GeV shall be TBD (T/m) . |
| P-ESR-MAG-QLS3.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-QLS3.21.1 | b1 = b1 < 1 (10^-4) |
| P-ESR-MAG-QLS3.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-QLS3.21.3 | -1.7 < b3 < 3.21 (10^-4) |
| P-ESR-MAG-QLS3.21.4 | -1.27 < b4 < 0.12 (10^-4) |
| P-ESR-MAG-QLS3.21.5 | b5 < 1 (10^-4) |
| P-ESR-MAG-QLS3.21.6 | 0.04 < b6 < 0.38 (10^-4) |
| P-ESR-MAG-QLS3.21.7 | b7 < 1 (10^-4) |
| P-ESR-MAG-QLS3.21.8 | -12.63 < b8 < -12.56 (10^-4) |
| P-ESR-MAG-QLS3.21.9 | b9 < 1 (10^-4) |
| P-ESR-MAG-QLS3.21.10 | b10 < 1 (10^-4) |
| P-ESR-MAG-QLS3.21.11 | b11 < 1 (10^-4) |
| P-ESR-MAG-QLS3.21.12 | b12 < 1 (10^-4) |
| P-ESR-MAG-QLS3.21.13 | b13 < 1 (10^-4) |
| P-ESR-MAG-QLS3.21.14 | -0.47<b14<-0.47 (10^-4) |
| P-ESR-MAG-QLS3.21.15 | b15 < 1 (10^-4) |
| P-ESR-MAG-QLS3.21.16 | b16 < 1 (10^-4) |
| P-ESR-MAG-QLS3.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-QLS3.23 | < blank > |
| P-ESR-MAG-QLS3.24 | < blank > |
| P-ESR-MAG-QLS3.25 | < blank > |
| P-ESR-MAG-QLS3.26 | < blank > |
| P-ESR-MAG-QLS3.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-QLS3.28 | The magnet shall be designed to meet the following fringe field requirements TBD |
| P-ESR-MAG-QLS3.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-QLS3.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-QLS3.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-QLS3.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-QLS3.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-QLS3.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-QLS3.35 | < blank > |
| P-ESR-MAG-QLS3.36 | < blank > |
| P-ESR-MAG-QLS3.37 | < blank > |
| P-ESR-MAG-QLS3.38 | < blank > |
| P-ESR-MAG-QLS3.39 | < blank > |
| P-ESR-MAG-QLS3.40 | < blank > |
| P-ESR-MAG-QLS3.41 | < blank > |
| P-ESR-MAG-QLS3.42 | < blank > |
| P-ESR-MAG-QLS3.43 | < blank > |
| P-ESR-MAG-QLS3.44 | < blank > |
| P-ESR-MAG-QLS3.45 | < blank > |
| P-ESR-MAG-QLS3.46 | < blank > |
| P-ESR-MAG-QLS3.47 | < blank > |
| P-ESR-MAG-QLS3.48 | < blank > |
| P-ESR-MAG-QLS3.49 | < blank > |
| P-ESR-MAG-QLS3.50 | < blank > |
| P-ESR-MAG-QLS3.51 | < blank > |
| P-ESR-MAG-QLS3.52 | < blank > |
| P-ESR-MAG-QLS3.53 | < blank > |
| P-ESR-MAG-QLS3.54 | < blank > |
| P-ESR-MAG-QLS3.55 | The magnet shall not be designed to constain the external fringe field |
| P-ESR-MAG-QLS3.56 | < blank > |
| P-ESR-MAG-QSS1.1 | The magnet shall have a single function. |
| P-ESR-MAG-QSS1.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-QSS1.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-QSS1.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-QSS1.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-QSS1.6 | < blank > |
| P-ESR-MAG-QSS1.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-QSS1.8 | The magnet pole tip radius shall be 67.8823 mm. |
| P-ESR-MAG-QSS1.9 | < blank > |
| P-ESR-MAG-QSS1.10 | The magnet good field aperture dAx required shall be 31.4421 mm. |
| P-ESR-MAG-QSS1.11 | The magnet good field aperture dAy required shall be 17.0633 mm. |
| P-ESR-MAG-QSS1.12 | The physical magnet length shall be <0.324 m. |
| P-ESR-MAG-QSS1.13 | The magnet model length shall be 0.324 m. |
| P-ESR-MAG-QSS1.14 | < blank > |
| P-ESR-MAG-QSS1.15 | < blank > |
| P-ESR-MAG-QSS1.16 | The magnet integrated grad field G shall be 8.9392 T/m.m. |
| P-ESR-MAG-QSS1.17 | < blank > |
| P-ESR-MAG-QSS1.18 | The magnet to magnet field variability between magnets shall be TBD %. |
| P-ESR-MAG-QSS1.19 | The harmonic reference radius at the design energy of 18 GeV shall be TBD (mm) . |
| P-ESR-MAG-QSS1.20 | The Field at the reference radius at the design energy of 18 GeV shall be TBD (T/m) . |
| P-ESR-MAG-QSS1.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-QSS1.21.1 | b1 = b1 < 1 (10^-4) |
| P-ESR-MAG-QSS1.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-QSS1.21.3 | b3 < 1 (10^-4) |
| P-ESR-MAG-QSS1.21.4 | -1.75 < b6 < -1.12 (10^-4) |
| P-ESR-MAG-QSS1.21.5 | b5 < 1 (10^-4) |
| P-ESR-MAG-QSS1.21.6 | b6 < 1 (10^-4) |
| P-ESR-MAG-QSS1.21.7 | b7 < 1 (10^-4) |
| P-ESR-MAG-QSS1.21.8 | b8 < 1 (10^-4) |
| P-ESR-MAG-QSS1.21.9 | b9 < 1 (10^-4) |
| P-ESR-MAG-QSS1.21.10 | b10 < 1 (10^-4) |
| P-ESR-MAG-QSS1.21.11 | b11 < 1 (10^-4) |
| P-ESR-MAG-QSS1.21.12 | b12 < 1 (10^-4) |
| P-ESR-MAG-QSS1.21.13 | b13 < 1 (10^-4) |
| P-ESR-MAG-QSS1.21.14 | b14 < 1 (10^-4) |
| P-ESR-MAG-QSS1.21.15 | b15 < 1 (10^-4) |
| P-ESR-MAG-QSS1.21.16 | b16 < 1 (10^-4) |
| P-ESR-MAG-QSS1.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-QSS1.23 | < blank > |
| P-ESR-MAG-QSS1.24 | < blank > |
| P-ESR-MAG-QSS1.25 | < blank > |
| P-ESR-MAG-QSS1.26 | < blank > |
| P-ESR-MAG-QSS1.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-QSS1.28 | The magnet shall be designed to meet the following fringe field requirements TBD |
| P-ESR-MAG-QSS1.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-QSS1.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-QSS1.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-QSS1.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-QSS1.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-QSS1.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-QSS1.35 | < blank > |
| P-ESR-MAG-QSS1.36 | < blank > |
| P-ESR-MAG-QSS1.37 | < blank > |
| P-ESR-MAG-QSS1.38 | < blank > |
| P-ESR-MAG-QSS1.39 | < blank > |
| P-ESR-MAG-QSS1.40 | < blank > |
| P-ESR-MAG-QSS1.41 | < blank > |
| P-ESR-MAG-QSS1.42 | < blank > |
| P-ESR-MAG-QSS1.43 | < blank > |
| P-ESR-MAG-QSS1.44 | < blank > |
| P-ESR-MAG-QSS1.45 | < blank > |
| P-ESR-MAG-QSS1.46 | < blank > |
| P-ESR-MAG-QSS1.47 | < blank > |
| P-ESR-MAG-QSS1.48 | < blank > |
| P-ESR-MAG-QSS1.49 | < blank > |
| P-ESR-MAG-QSS1.50 | < blank > |
| P-ESR-MAG-QSS2.1 | The magnet shall have a single function. |
| P-ESR-MAG-QSS2.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-QSS2.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-QSS2.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-QSS2.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-QSS2.6 | < blank > |
| P-ESR-MAG-QSS2.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-QSS2.8 | The magnet pole tip radius shall be 67.8823 mm. |
| P-ESR-MAG-QSS2.9 | < blank > |
| P-ESR-MAG-QSS2.10 | The magnet good field aperture dAx required shall be 32.4385 mm. |
| P-ESR-MAG-QSS2.11 | The magnet good field aperture dAy required shall be 15.6686 mm. |
| P-ESR-MAG-QSS2.12 | The physical magnet length shall be <0.478 m. |
| P-ESR-MAG-QSS2.13 | The magnet model length shall be 0.478 m. |
| P-ESR-MAG-QSS2.14 | < blank > |
| P-ESR-MAG-QSS2.15 | < blank > |
| P-ESR-MAG-QSS2.16 | The magnet integrated grad field G shall be 0.9397 T/m.m. |
| P-ESR-MAG-QSS2.17 | < blank > |
| P-ESR-MAG-QSS2.18 | The magnet to magnet field variability between magnets shall be TBD %. |
| P-ESR-MAG-QSS2.19 | The harmonic reference radius at the design energy of 18 GeV shall be TBD (mm) . |
| P-ESR-MAG-QSS2.20 | The Field at the reference radius at the design energy of 18 GeV shall be TBD (T/m) . |
| P-ESR-MAG-QSS2.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-QSS2.21.1 | b1 = b1 < 1 (10^-4) |
| P-ESR-MAG-QSS2.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-QSS2.21.3 | b3 < 1 (10^-4) |
| P-ESR-MAG-QSS2.21.4 | -2.14 < b6 < -1.29 (10^-4) |
| P-ESR-MAG-QSS2.21.5 | b5 < 1 (10^-4) |
| P-ESR-MAG-QSS2.21.6 | b6 < 1 (10^-4) |
| P-ESR-MAG-QSS2.21.7 | b7 < 1 (10^-4) |
| P-ESR-MAG-QSS2.21.8 | b8 < 1 (10^-4) |
| P-ESR-MAG-QSS2.21.9 | b9 < 1 (10^-4) |
| P-ESR-MAG-QSS2.21.10 | b10 < 1 (10^-4) |
| P-ESR-MAG-QSS2.21.11 | b11 < 1 (10^-4) |
| P-ESR-MAG-QSS2.21.12 | b12 < 1 (10^-4) |
| P-ESR-MAG-QSS2.21.13 | b13 < 1 (10^-4) |
| P-ESR-MAG-QSS2.21.14 | b14 < 1 (10^-4) |
| P-ESR-MAG-QSS2.21.15 | b15 < 1 (10^-4) |
| P-ESR-MAG-QSS2.21.16 | b16 < 1 (10^-4) |
| P-ESR-MAG-QSS2.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-QSS2.23 | < blank > |
| P-ESR-MAG-QSS2.24 | < blank > |
| P-ESR-MAG-QSS2.25 | < blank > |
| P-ESR-MAG-QSS2.26 | < blank > |
| P-ESR-MAG-QSS2.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-QSS2.28 | The magnet shall be designed to meet the following fringe field requirements TBD |
| P-ESR-MAG-QSS2.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-QSS2.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-QSS2.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-QSS2.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-QSS2.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-QSS2.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-QSS2.35 | < blank > |
| P-ESR-MAG-QSS2.36 | < blank > |
| P-ESR-MAG-QSS2.37 | < blank > |
| P-ESR-MAG-QSS2.38 | < blank > |
| P-ESR-MAG-QSS2.39 | < blank > |
| P-ESR-MAG-QSS2.40 | < blank > |
| P-ESR-MAG-QSS2.41 | < blank > |
| P-ESR-MAG-QSS2.42 | < blank > |
| P-ESR-MAG-QSS2.43 | < blank > |
| P-ESR-MAG-QSS2.44 | < blank > |
| P-ESR-MAG-QSS2.45 | < blank > |
| P-ESR-MAG-QSS2.46 | < blank > |
| P-ESR-MAG-QSS2.47 | < blank > |
| P-ESR-MAG-QSS2.48 | < blank > |
| P-ESR-MAG-QSS2.49 | < blank > |
| P-ESR-MAG-QSS2.50 | < blank > |
| P-ESR-MAG-QSS2.51 | < blank > |
| P-ESR-MAG-QSS2.52 | < blank > |
| P-ESR-MAG-QSS2.53 | < blank > |
| P-ESR-MAG-QSS2.54 | < blank > |
| P-ESR-MAG-QSS2.55 | The magnet shall not be designed to constain the external fringe field |
| P-ESR-MAG-QSS2.56 | < blank > |
| P-ESR-MAG-QSS3.1 | The magnet shall have a single function. |
| P-ESR-MAG-QSS3.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-QSS3.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-QSS3.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-QSS3.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-QSS3.6 | < blank > |
| P-ESR-MAG-QSS3.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-QSS3.8 | The magnet pole tip radius shall be 67.8823 mm. |
| P-ESR-MAG-QSS3.9 | < blank > |
| P-ESR-MAG-QSS3.10 | The magnet good field aperture dAx required shall be 33.1063 mm. |
| P-ESR-MAG-QSS3.11 | The magnet good field aperture dAy required shall be 14.2903 mm. |
| P-ESR-MAG-QSS3.12 | The physical magnet length shall be <0.817 m. |
| P-ESR-MAG-QSS3.13 | The magnet model length shall be 0.817 m. |
| P-ESR-MAG-QSS3.14 | < blank > |
| P-ESR-MAG-QSS3.15 | < blank > |
| P-ESR-MAG-QSS3.16 | The magnet integrated grad field G shall be 18.2853 T/m.m. |
| P-ESR-MAG-QSS3.17 | < blank > |
| P-ESR-MAG-QSS3.18 | The magnet to magnet field variability between magnets shall be TBD %. |
| P-ESR-MAG-QSS3.19 | The harmonic reference radius at the design energy of 18 GeV shall be TBD (mm) . |
| P-ESR-MAG-QSS3.20 | The Field at the reference radius at the design energy of 18 GeV shall be TBD (T/m) . |
| P-ESR-MAG-QSS3.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-QSS3.21.1 | b1 = b1 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-QSS3.21.3 | b3 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.4 | b4 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.5 | b5 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.6 | b6 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.7 | b7 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.8 | b8 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.9 | b9 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.10 | b10 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.11 | b11 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.12 | b12 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.13 | b13 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.14 | b14 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.15 | b15 < 1 (10^-4) |
| P-ESR-MAG-QSS3.21.16 | b16 < 1 (10^-4) |
| P-ESR-MAG-QSS3.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-QSS3.23 | < blank > |
| P-ESR-MAG-QSS3.24 | < blank > |
| P-ESR-MAG-QSS3.25 | < blank > |
| P-ESR-MAG-QSS3.26 | < blank > |
| P-ESR-MAG-QSS3.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-QSS3.28 | The magnet shall be designed to meet the following fringe field requirements TBD |
| P-ESR-MAG-QSS3.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-QSS3.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-QSS3.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-QSS3.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-QSS3.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-QSS3.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-QSS3.35 | < blank > |
| P-ESR-MAG-QSS3.36 | < blank > |
| P-ESR-MAG-QSS3.37 | < blank > |
| P-ESR-MAG-QSS3.38 | < blank > |
| P-ESR-MAG-QSS3.39 | < blank > |
| P-ESR-MAG-QSS3.40 | < blank > |
| P-ESR-MAG-QSS3.41 | < blank > |
| P-ESR-MAG-QSS3.42 | < blank > |
| P-ESR-MAG-QSS3.43 | < blank > |
| P-ESR-MAG-QSS3.44 | < blank > |
| P-ESR-MAG-QSS3.45 | < blank > |
| P-ESR-MAG-QSS3.46 | < blank > |
| P-ESR-MAG-QSS3.47 | < blank > |
| P-ESR-MAG-QSS3.48 | < blank > |
| P-ESR-MAG-QSS3.49 | < blank > |
| P-ESR-MAG-QSS3.50 | < blank > |
| P-ESR-MAG-QSS4.1 | The magnet shall have a single function. |
| P-ESR-MAG-QSS4.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-QSS4.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-QSS4.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-QSS4.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-QSS4.6 | < blank > |
| P-ESR-MAG-QSS4.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-QSS4.8 | The magnet pole tip radius shall be 67.8823 mm. |
| P-ESR-MAG-QSS4.9 | < blank > |
| P-ESR-MAG-QSS4.10 | The magnet good field aperture dAx required shall be 27.4519 mm. |
| P-ESR-MAG-QSS4.11 | The magnet good field aperture dAy required shall be 18.3385 mm. |
| P-ESR-MAG-QSS4.12 | The physical magnet length shall be <0.51 m. |
| P-ESR-MAG-QSS4.13 | The magnet model length shall be 0.51 m. |
| P-ESR-MAG-QSS4.14 | < blank > |
| P-ESR-MAG-QSS4.15 | < blank > |
| P-ESR-MAG-QSS4.16 | The magnet integrated grad field G shall be 2.4592 T/m.m. |
| P-ESR-MAG-QSS4.17 | < blank > |
| P-ESR-MAG-QSS4.18 | The magnet to magnet field variability between magnets shall be TBD %. |
| P-ESR-MAG-QSS4.19 | The harmonic reference radius at the design energy of 18 GeV shall be TBD (mm) . |
| P-ESR-MAG-QSS4.20 | The Field at the reference radius at the design energy of 18 GeV shall be TBD (T/m) . |
| P-ESR-MAG-QSS4.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-QSS4.21.1 | b1 = b1 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-QSS4.21.3 | b3 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.4 | b4 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.5 | b5 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.6 | b6 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.7 | b7 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.8 | b8 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.9 | b9 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.10 | b10 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.11 | b11 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.12 | b12 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.13 | b13 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.14 | b14 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.15 | b15 < 1 (10^-4) |
| P-ESR-MAG-QSS4.21.16 | b16 < 1 (10^-4) |
| P-ESR-MAG-QSS4.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-QSS4.23 | < blank > |
| P-ESR-MAG-QSS4.24 | < blank > |
| P-ESR-MAG-QSS4.25 | < blank > |
| P-ESR-MAG-QSS4.26 | < blank > |
| P-ESR-MAG-QSS4.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-QSS4.28 | The magnet shall be designed to meet the following fringe field requirements TBD |
| P-ESR-MAG-QSS4.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-QSS4.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-QSS4.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-QSS4.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-QSS4.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-QSS4.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-QSS4.35 | < blank > |
| P-ESR-MAG-QSS4.36 | < blank > |
| P-ESR-MAG-QSS4.37 | < blank > |
| P-ESR-MAG-QSS4.38 | < blank > |
| P-ESR-MAG-QSS4.39 | < blank > |
| P-ESR-MAG-QSS4.40 | < blank > |
| P-ESR-MAG-QSS4.41 | < blank > |
| P-ESR-MAG-QSS4.42 | < blank > |
| P-ESR-MAG-QSS4.43 | < blank > |
| P-ESR-MAG-QSS4.44 | < blank > |
| P-ESR-MAG-QSS4.45 | < blank > |
| P-ESR-MAG-QSS4.46 | < blank > |
| P-ESR-MAG-QSS4.47 | < blank > |
| P-ESR-MAG-QSS4.48 | < blank > |
| P-ESR-MAG-QSS4.49 | < blank > |
| P-ESR-MAG-QSS4.50 | < blank > |
| P-ESR-MAG-QSS5.1 | The magnet shall have a single function. |
| P-ESR-MAG-QSS5.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-QSS5.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-QSS5.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-QSS5.5 | The magnet shall have a Quadrupole field. |
| P-ESR-MAG-QSS5.6 | < blank > |
| P-ESR-MAG-QSS5.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-QSS5.8 | The magnet pole tip radius shall be 67.8823 mm. |
| P-ESR-MAG-QSS5.9 | < blank > |
| P-ESR-MAG-QSS5.10 | The magnet good field aperture dAx required shall be 23.2114 mm. |
| P-ESR-MAG-QSS5.11 | The magnet good field aperture dAy required shall be 22.2856 mm. |
| P-ESR-MAG-QSS5.12 | The physical magnet length shall be <0.343 m. |
| P-ESR-MAG-QSS5.13 | The magnet model length shall be 0.343 m. |
| P-ESR-MAG-QSS5.14 | < blank > |
| P-ESR-MAG-QSS5.15 | < blank > |
| P-ESR-MAG-QSS5.16 | The magnet integrated grad field G shall be 10.9564 T/m.m. |
| P-ESR-MAG-QSS5.17 | < blank > |
| P-ESR-MAG-QSS5.18 | The magnet to magnet field variability between magnets shall be TBD %. |
| P-ESR-MAG-QSS5.19 | The harmonic reference radius at the design energy of 18 GeV shall be TBD (mm) . |
| P-ESR-MAG-QSS5.20 | The Field at the reference radius at the design energy of 18 GeV shall be TBD (T/m) . |
| P-ESR-MAG-QSS5.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-QSS5.21.1 | b1 = b1 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.2 | b2 = 10000 (10^-4) |
| P-ESR-MAG-QSS5.21.3 | b3 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.4 | b4 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.5 | b5 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.6 | b6 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.7 | b7 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.8 | b8 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.9 | b9 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.10 | b10 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.11 | b11 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.12 | b12 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.13 | b13 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.14 | b14 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.15 | b15 < 1 (10^-4) |
| P-ESR-MAG-QSS5.21.16 | b16 < 1 (10^-4) |
| P-ESR-MAG-QSS5.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-QSS5.23 | < blank > |
| P-ESR-MAG-QSS5.24 | < blank > |
| P-ESR-MAG-QSS5.25 | < blank > |
| P-ESR-MAG-QSS5.26 | < blank > |
| P-ESR-MAG-QSS5.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-QSS5.28 | The magnet shall be designed to meet the following fringe field requirements TBD |
| P-ESR-MAG-QSS5.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-QSS5.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-QSS5.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-QSS5.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-QSS5.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-QSS5.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-QSS5.35 | < blank > |
| P-ESR-MAG-QSS5.36 | < blank > |
| P-ESR-MAG-QSS5.37 | < blank > |
| P-ESR-MAG-QSS5.38 | < blank > |
| P-ESR-MAG-QSS5.39 | < blank > |
| P-ESR-MAG-QSS5.40 | < blank > |
| P-ESR-MAG-QSS5.41 | < blank > |
| P-ESR-MAG-QSS5.42 | < blank > |
| P-ESR-MAG-QSS5.43 | < blank > |
| P-ESR-MAG-QSS5.44 | < blank > |
| P-ESR-MAG-QSS5.45 | < blank > |
| P-ESR-MAG-QSS5.46 | < blank > |
| P-ESR-MAG-QSS5.47 | < blank > |
| P-ESR-MAG-QSS5.48 | < blank > |
| P-ESR-MAG-QSS5.49 | < blank > |
| P-ESR-MAG-QSS5.50 | < blank > |
| P-ESR-MAG-SXT.1 | The magnet shall have a single function. |
| P-ESR-MAG-SXT.5 | The magnet shall have a Sextupole field. |
| P-ESR-MAG-SXT.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-SXT.12 | The physical magnet length shall be <0.24 m. |
| P-ESR-MAG-SXT.13 | The magnet model length shall be 0.24 m. |
| P-ESR-MAG-SXT.16 | The magnet integrated grad field G shall be 47.285 T/m2.m. |
| P-ESR-MAG-SXT.19 | The harmonic reference radius at the design energy of 18 GeV shall be 27 (mm) . |
| P-ESR-MAG-SXT.20 | The Field at the reference radius at the design energy of 18 GeV shall be 405 (T/m^2) . |
| P-ESR-MAG-SXT.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-SXT.21.3 | b3 = 10000 (10^-4) |
| P-ESR-MAG-SXT.21.4 | -3.65 < b4 < 6.92 (10^-4) |
| P-ESR-MAG-SXT.21.5 | -2.97 < b5 < 0.29 (10^-4) |
| P-ESR-MAG-SXT.21.6 | -1.50 < b6 < 1.50 (10^-4) |
| P-ESR-MAG-SXT.21.7 | -0.4 < b7 < 0.51 (10^-4) |
| P-ESR-MAG-SXT.21.8 | -1.50 < b8 < 1.50 (10^-4) |
| P-ESR-MAG-SXT.21.9 | -40.1 < b9 < -39.86 (10^-4) |
| P-ESR-MAG-SXT.21.10 | -1.50 < b10 < 1.50 (10^-4) |
| P-ESR-MAG-SXT.21.11 | -1.50 < b11 < 1.50 (10^-4) |
| P-ESR-MAG-SXT.21.12 | -1.50 < b12 < 1.50 (10^-4) |
| P-ESR-MAG-SXT.21.13 | -1.50 < b13 < 1.50 (10^-4) |
| P-ESR-MAG-SXT.21.14 | -1.50 < b14 < 1.50 (10^-4) |
| P-ESR-MAG-SXT.21.15 | -2.38 < b15 < -2.35 (10^-4) |
| P-ESR-MAG-SXT.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-SXT.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-SXT.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-MAG-SXT.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-SXT.46 | < blank > |
| P-ESR-MAG-SXT.47 | < blank > |
| P-ESR-MAG-SXT_LONG.1 | The magnet shall have a single function. |
| P-ESR-MAG-SXT_LONG.2 | The magnet shall require trim coils capable of trimming the field within +/- TBD (%) of the Peak field. |
| P-ESR-MAG-SXT_LONG.3 | The magnet shall require current taps for operation TBD ( Y or N) |
| P-ESR-MAG-SXT_LONG.4 | The magnet shall require shunt(s) for operation TBD ( Y or N) |
| P-ESR-MAG-SXT_LONG.5 | The magnet shall have a Sextupole field. |
| P-ESR-MAG-SXT_LONG.7 | The magnet shall have a normal field rotation. |
| P-ESR-MAG-SXT_LONG.8 | The magnet pole tip radius shall be 67.8823 mm. |
| P-ESR-MAG-SXT_LONG.10 | The magnet good field aperture dAx required shall be 29.6794 mm. |
| P-ESR-MAG-SXT_LONG.11 | The magnet good field aperture dAy required shall be 19.286 mm. |
| P-ESR-MAG-SXT_LONG.12 | The physical magnet length shall be <0.57 m. |
| P-ESR-MAG-SXT_LONG.13 | The magnet model length shall be 0.57 m. |
| P-ESR-MAG-SXT_LONG.16 | The magnet integrated grad field G shall be 112.302 T/m2.m. |
| P-ESR-MAG-SXT_LONG.18 | The magnet to magnet field variability between magnets shall be TBD (%) %. |
| P-ESR-MAG-SXT_LONG.19 | The harmonic reference radius at the design energy of 18 GeV shall be TBD (mm) . |
| P-ESR-MAG-SXT_LONG.20 | The Field at the reference radius at the design energy of 18 GeV shall be 197 (T/m^2) . |
| P-ESR-MAG-SXT_LONG.21 | The magnet bore field shall require the following multipole content: |
| P-ESR-MAG-SXT_LONG.21.1 | b1 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.2 | b2 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.3 | b3 = 10000 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.4 | b4 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.5 | b5 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.6 | b6 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.7 | b7 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.8 | b8 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.9 | b9 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.10 | b10 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.11 | b11 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.12 | b12 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.13 | b13 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.14 | b14 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.15 | b15 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.21.16 | b16 < 1 (10^-4) |
| P-ESR-MAG-SXT_LONG.22 | The magnet shall not be designed to limit CrossTalk requirements. |
| P-ESR-MAG-SXT_LONG.27 | The magnet shall be designed to specifically constrain the external fringe field TBD (Yes or No) |
| P-ESR-MAG-SXT_LONG.28 | The magnet shall be designed to meet the following fringe field requirements TBD |
| P-ESR-MAG-SXT_LONG.29 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation TBD (Yes or No) |
| P-ESR-MAG-SXT_LONG.30 | The magnet shall be designed to fit within the following envelope. TBD (Yes or No) |
| P-ESR-MAG-SXT_LONG.31 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC. TBD (Yes or No) |
| P-ESR-PS-CORR_H.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-CORR_H.2 | The magnet type being powered is KICKER |
| P-ESR-PS-CORR_H.3 | The magnet model being powered is CORR_H |
| P-ESR-PS-CORR_H.4 | Number of unique magnet strings 105 |
| P-ESR-PS-CORR_H.5 | Quantity of magnets per unique string 1 |
| P-ESR-PS-CORR_H.6 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-CORR_H.7 | The minimum magnet resistance to be powered shall be 0 mOhm |
| P-ESR-PS-CORR_H.8 | The maximum magnet resistance to be powered shall be TBD mOhm |
| P-ESR-PS-CORR_H.9 | The minimum magnet inductance to be powered shall be 0 H |
| P-ESR-PS-CORR_H.10 | The maximum magnet inductance to be powered shall be TBD H |
| P-ESR-PS-CORR_H.11 | The max voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-CORR_H.12 | The minimum opperating current the PS must operate at shall be TBD A |
| P-ESR-PS-CORR_H.13 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-CORR_H.14 | The current tuning margin shall be TBD % |
| P-ESR-PS-CORR_H.15 | The current ps reliability margin shall be TBD |
| P-ESR-PS-CORR_H.16 | The PS current type shall be DC (DC or Ramped ) |
| P-ESR-PS-CORR_H.17 | The full power bandwidth required shall be N/A |
| P-ESR-PS-CORR_H.18 | The PS waveshape required shall be N/A |
| P-ESR-PS-CORR_H.19 | The peak waveshape di/dt during ramping shall be N/A A/s |
| P-ESR-PS-CORR_H.20 | The ppm of full scale current (rms) shall be 100 ppm |
| P-ESR-PS-CORR_H.21 | The time period for specified stability shall be TBD s |
| P-ESR-PS-CORR_H.22 | The short term stability shall be TBD A/s |
| P-ESR-PS-CORR_H.23 | The long term stability shall be (1 sec to 12 hrs?) TBD A/s |
| P-ESR-PS-CORR_H.24 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-CORR_H.25 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-CORR_H.26 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-CORR_H.27 | The max allowable current ripple (rms) of full scale current low (0-4kHz) and s 100 A |
| P-ESR-PS-CORR_H.28 | The max allowable current ripple (rms) of full scale current high (4kHz-1MHz) 100 A |
| P-ESR-PS-CORR_H.29 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-CORR_H.30 | WRT to the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-CORR_H.31 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-CORR_H.32 | An NMR in a reference magnet shall be required to measure the field TBD A/s |
| P-ESR-PS-CORR_H.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-CORR_H.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-CORR_H.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-CORR_H.36 | The design shall have thermal switches TBD |
| P-ESR-PS-CORR_H.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-CORR_H.38 | The design shall have water flow switches TBD |
| P-ESR-PS-CORR_H.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-CORR_H.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-CORR_H.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-CORR_H.42 | The lead end indications shall be TBD |
| P-ESR-PS-CORR_H.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-CORR_H.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-CORR_H.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-CORR_H.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-CORR_H.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-D13.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-D13.2 | The magnet type being powered is DIPOLE |
| P-ESR-PS-D13.3 | The magnet model being powered is D13 |
| P-ESR-PS-D13.4 | Number of unique magnet strings 28 |
| P-ESR-PS-D13.5 | Quantity of magnets per unique string 1, 2, 4, 5, 12, 13, 15, 16, 176 |
| P-ESR-PS-D13.6 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-D13.7 | The minimum magnet resistance to be powered shall be 2.057874, 4.115748, 8.231496, 10.28937, 24.694488, 26.752362, 30.86811, 32.925984, 362.185824 mOhm |
| P-ESR-PS-D13.8 | The maximum magnet resistance to be powered shall be TBD mOhm |
| P-ESR-PS-D13.9 | The minimum magnet inductance to be powered shall be 0.0015625, 0.003125, 0.00625, 0.0078125, 0.01875, 0.0203125, 0.0234375, 0.025, 0.275 H |
| P-ESR-PS-D13.10 | The maximum magnet inductance to be powered shall be TBD H |
| P-ESR-PS-D13.11 | The max voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-D13.12 | The minimum opperating current the PS must operate at shall be 1040, 120.85, 736.06, 992.39, 911.83, 911.83, 911.83, 911.83, 831.27 A |
| P-ESR-PS-D13.13 | The maximum current the PS must operate at shall be 1040, 988.73, 977.75, 992.39, 911.83, 911.83, 911.83, 911.83, 831.27 A |
| P-ESR-PS-D13.14 | The current tuning margin shall be TBD % |
| P-ESR-PS-D13.15 | The current ps reliability margin shall be TBD |
| P-ESR-PS-D13.16 | The PS current type shall be DC (DC or Ramped ) |
| P-ESR-PS-D13.17 | The full power bandwidth required shall be N/A |
| P-ESR-PS-D13.18 | The PS waveshape required shall be N/A |
| P-ESR-PS-D13.19 | The peak waveshape di/dt during ramping shall be N/A A/s |
| P-ESR-PS-D13.20 | The ppm of full scale current (rms) shall be *change to PPM & need to ask Physicist ppm |
| P-ESR-PS-D13.21 | The time period for specified stability shall be TBD s |
| P-ESR-PS-D13.22 | The short term stability shall be TBD A/s |
| P-ESR-PS-D13.23 | The long term stability shall be (1 sec to 12 hrs?) TBD A/s |
| P-ESR-PS-D13.24 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-D13.25 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-D13.26 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-D13.27 | The max allowable current ripple (rms) of full scale current low (0-4kHz) and s TBD A |
| P-ESR-PS-D13.28 | The max allowable current ripple (rms) of full scale current high (4kHz-1MHz) TBD A |
| P-ESR-PS-D13.29 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-D13.30 | WRT to the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-D13.31 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-D13.32 | An NMR in a reference magnet shall be required to measure the field TBD A/s |
| P-ESR-PS-D13.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-D13.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-D13.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-D13.36 | The design shall have thermal switches TBD |
| P-ESR-PS-D13.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-D13.38 | The design shall have water flow switches TBD |
| P-ESR-PS-D13.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-D13.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-D13.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-D13.42 | The lead end indications shall be TBD |
| P-ESR-PS-D13.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-D13.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-D13.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-D13.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-D13.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-D2.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-D2.2 | The magnet type being powered is DIPOLE |
| P-ESR-PS-D2.3 | The magnet model being powered is D2 |
| P-ESR-PS-D2.4 | Number of unique magnet strings 7 |
| P-ESR-PS-D2.5 | Quantity of magnets per unique string 1, 4, 176 |
| P-ESR-PS-D2.6 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-D2.7 | The minimum magnet resistance to be powered shall be 2.4, 9.6, 422.4 mOhm |
| P-ESR-PS-D2.8 | The maximum magnet resistance to be powered shall be TBD mOhm |
| P-ESR-PS-D2.9 | The minimum magnet inductance to be powered shall be 0.00153, 0.00612, 0.26928 H |
| P-ESR-PS-D2.10 | The maximum magnet inductance to be powered shall be TBD H |
| P-ESR-PS-D2.11 | The max voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-D2.12 | The minimum opperating current the PS must operate at shall be 409.09, 822.27, 928.64 A |
| P-ESR-PS-D2.13 | The maximum current the PS must operate at shall be 863.18, 1035, 928.64 A |
| P-ESR-PS-D2.14 | The current tuning margin shall be TBD % |
| P-ESR-PS-D2.15 | The current ps reliability margin shall be TBD |
| P-ESR-PS-D2.16 | The PS current type shall be DC (DC or Ramped ) |
| P-ESR-PS-D2.17 | The full power bandwidth required shall be N/A |
| P-ESR-PS-D2.18 | The PS waveshape required shall be N/A |
| P-ESR-PS-D2.19 | The peak waveshape di/dt during ramping shall be N/A A/s |
| P-ESR-PS-D2.20 | The ppm of full scale current (rms) shall be *change to PPM & need to ask Physicist ppm |
| P-ESR-PS-D2.21 | The time period for specified stability shall be TBD s |
| P-ESR-PS-D2.22 | The short term stability shall be TBD A/s |
| P-ESR-PS-D2.23 | The long term stability shall be (1 sec to 12 hrs?) TBD A/s |
| P-ESR-PS-D2.24 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-D2.25 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-D2.26 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-D2.27 | The max allowable current ripple (rms) of full scale current low (0-4kHz) and s TBD A |
| P-ESR-PS-D2.28 | The max allowable current ripple (rms) of full scale current high (4kHz-1MHz) TBD A |
| P-ESR-PS-D2.29 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-D2.30 | WRT to the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-D2.31 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-D2.32 | An NMR in a reference magnet shall be required to measure the field TBD A/s |
| P-ESR-PS-D2.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-D2.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-D2.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-D2.36 | The design shall have thermal switches TBD |
| P-ESR-PS-D2.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-D2.38 | The design shall have water flow switches TBD |
| P-ESR-PS-D2.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-D2.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-D2.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-D2.42 | The lead end indications shall be TBD |
| P-ESR-PS-D2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-D2.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-D2.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-D2.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-D2.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-Q50.1 | The number of Independent functions on the magnets being powered shall be 2 |
| P-ESR-PS-Q50.2 | The magnet type being powered is QUADRUPOLE |
| P-ESR-PS-Q50.3 | The magnet model being powered is Q50 |
| P-ESR-PS-Q50.4 | Number of unique magnet strings 62 |
| P-ESR-PS-Q50.5 | Quantity of magnets per unique string 1, 2, 11, 12, 15, 18, 19 |
| P-ESR-PS-Q50.6 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-Q50.7 | The minimum magnet resistance to be powered shall be 30, 60, 330, 360, 450, 540, 570 mOhm |
| P-ESR-PS-Q50.8 | The maximum magnet resistance to be powered shall be TBD mOhm |
| P-ESR-PS-Q50.9 | The minimum magnet inductance to be powered shall be 0.017, 0.034, 0.187, 0.204, 0.255, 0.306, 0.323 H |
| P-ESR-PS-Q50.10 | The maximum magnet inductance to be powered shall be TBD H |
| P-ESR-PS-Q50.11 | The max voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-Q50.12 | The minimum opperating current the PS must operate at shall be 42.14, 66, 242.4, 242.25, 243.94, 241.94, 242.08 A |
| P-ESR-PS-Q50.13 | The maximum current the PS must operate at shall be 412, 317.37, 242.4, 242.25, 244.58, 243.74, 243.89 A |
| P-ESR-PS-Q50.14 | The current tuning margin shall be TBD % |
| P-ESR-PS-Q50.15 | The current ps reliability margin shall be TBD |
| P-ESR-PS-Q50.16 | The PS current type shall be DC (DC or Ramped ) |
| P-ESR-PS-Q50.17 | The full power bandwidth required shall be N/A |
| P-ESR-PS-Q50.18 | The PS waveshape required shall be N/A |
| P-ESR-PS-Q50.19 | The peak waveshape di/dt during ramping shall be N/A A/s |
| P-ESR-PS-Q50.20 | The ppm of full scale current (rms) shall be 5 ppm |
| P-ESR-PS-Q50.21 | The time period for specified stability shall be TBD s |
| P-ESR-PS-Q50.22 | The short term stability shall be TBD A/s |
| P-ESR-PS-Q50.23 | The long term stability shall be (1 sec to 12 hrs?) 100 A/s |
| P-ESR-PS-Q50.24 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-Q50.25 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-Q50.26 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-Q50.27 | The max allowable current ripple (rms) of full scale current low (0-4kHz) and s 5 A |
| P-ESR-PS-Q50.28 | The max allowable current ripple (rms) of full scale current high (4kHz-1MHz) 5 A |
| P-ESR-PS-Q50.29 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-Q50.30 | WRT to the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-Q50.31 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-Q50.32 | An NMR in a reference magnet shall be required to measure the field TBD A/s |
| P-ESR-PS-Q50.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-Q50.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-Q50.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-Q50.36 | The design shall have thermal switches TBD |
| P-ESR-PS-Q50.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-Q50.38 | The design shall have water flow switches TBD |
| P-ESR-PS-Q50.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-Q50.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-Q50.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-Q50.42 | The lead end indications shall be TBD |
| P-ESR-PS-Q50.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-Q50.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-Q50.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-Q50.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-Q50.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-Q60.1 | The number of Independent functions on the magnets being powered shall be 3 |
| P-ESR-PS-Q60.2 | The magnet type being powered is QUADRUPOLE |
| P-ESR-PS-Q60.3 | The magnet model being powered is Q60 |
| P-ESR-PS-Q60.4 | Number of unique magnet strings 9 |
| P-ESR-PS-Q60.5 | Quantity of magnets per unique string 1 |
| P-ESR-PS-Q60.6 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-Q60.7 | The minimum magnet resistance to be powered shall be 35 mOhm |
| P-ESR-PS-Q60.8 | The maximum magnet resistance to be powered shall be TBD mOhm |
| P-ESR-PS-Q60.9 | The minimum magnet inductance to be powered shall be 0.02 H |
| P-ESR-PS-Q60.10 | The maximum magnet inductance to be powered shall be TBD H |
| P-ESR-PS-Q60.11 | The max voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-Q60.12 | The minimum opperating current the PS must operate at shall be 6.13 A |
| P-ESR-PS-Q60.13 | The maximum current the PS must operate at shall be 412 A |
| P-ESR-PS-Q60.14 | The current tuning margin shall be TBD % |
| P-ESR-PS-Q60.15 | The current ps reliability margin shall be TBD |
| P-ESR-PS-Q60.16 | The PS current type shall be DC (DC or Ramped ) |
| P-ESR-PS-Q60.17 | The full power bandwidth required shall be N/A |
| P-ESR-PS-Q60.18 | The PS waveshape required shall be N/A |
| P-ESR-PS-Q60.19 | The peak waveshape di/dt during ramping shall be N/A A/s |
| P-ESR-PS-Q60.20 | The ppm of full scale current (rms) shall be 5 ppm |
| P-ESR-PS-Q60.21 | The time period for specified stability shall be TBD s |
| P-ESR-PS-Q60.22 | The short term stability shall be TBD A/s |
| P-ESR-PS-Q60.23 | The long term stability shall be (1 sec to 12 hrs?) 100 A/s |
| P-ESR-PS-Q60.24 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-Q60.25 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-Q60.26 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-Q60.27 | The max allowable current ripple (rms) of full scale current low (0-4kHz) and s 5 A |
| P-ESR-PS-Q60.28 | The max allowable current ripple (rms) of full scale current high (4kHz-1MHz) 5 A |
| P-ESR-PS-Q60.29 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-Q60.30 | WRT to the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-Q60.31 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-Q60.32 | An NMR in a reference magnet shall be required to measure the field TBD A/s |
| P-ESR-PS-Q60.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-Q60.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-Q60.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-Q60.36 | The design shall have thermal switches TBD |
| P-ESR-PS-Q60.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-Q60.38 | The design shall have water flow switches TBD |
| P-ESR-PS-Q60.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-Q60.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-Q60.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-Q60.42 | The lead end indications shall be TBD |
| P-ESR-PS-Q60.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-Q60.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-Q60.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-Q60.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-Q60.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-Q80.1 | The number of Independent functions on the magnets being powered shall be 4 |
| P-ESR-PS-Q80.2 | The magnet type being powered is QUADRUPOLE |
| P-ESR-PS-Q80.3 | The magnet model being powered is Q80 |
| P-ESR-PS-Q80.4 | Number of unique magnet strings 151 |
| P-ESR-PS-Q80.5 | Quantity of magnets per unique string 1, 4, 7 |
| P-ESR-PS-Q80.6 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-Q80.7 | The minimum magnet resistance to be powered shall be 44, 176, 308 mOhm |
| P-ESR-PS-Q80.8 | The maximum magnet resistance to be powered shall be TBD mOhm |
| P-ESR-PS-Q80.9 | The minimum magnet inductance to be powered shall be 0.027, 0.108, 0.189 H |
| P-ESR-PS-Q80.10 | The maximum magnet inductance to be powered shall be TBD H |
| P-ESR-PS-Q80.11 | The max voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-Q80.12 | The minimum opperating current the PS must operate at shall be 0, 191.19, 76.08 A |
| P-ESR-PS-Q80.13 | The maximum current the PS must operate at shall be 412, 192.12, 92.74 A |
| P-ESR-PS-Q80.14 | The current tuning margin shall be TBD % |
| P-ESR-PS-Q80.15 | The current ps reliability margin shall be TBD |
| P-ESR-PS-Q80.16 | The PS current type shall be DC (DC or Ramped ) |
| P-ESR-PS-Q80.17 | The full power bandwidth required shall be N/A |
| P-ESR-PS-Q80.18 | The PS waveshape required shall be N/A |
| P-ESR-PS-Q80.19 | The peak waveshape di/dt during ramping shall be N/A A/s |
| P-ESR-PS-Q80.20 | The ppm of full scale current (rms) shall be 5 ppm |
| P-ESR-PS-Q80.21 | The time period for specified stability shall be TBD s |
| P-ESR-PS-Q80.22 | The short term stability shall be TBD A/s |
| P-ESR-PS-Q80.23 | The long term stability shall be (1 sec to 12 hrs?) 100 A/s |
| P-ESR-PS-Q80.24 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-Q80.25 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-Q80.26 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-Q80.27 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-Q80.28 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-Q80.29 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-Q80.30 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-Q80.31 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-Q80.32 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-Q80.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-Q80.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-Q80.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-Q80.36 | The design shall have thermal switches TBD |
| P-ESR-PS-Q80.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-Q80.38 | The design shall have water flow switches TBD |
| P-ESR-PS-Q80.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-Q80.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-Q80.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-Q80.42 | The lead end indications shall be TBD |
| P-ESR-PS-Q80.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-Q80.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-Q80.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-Q80.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-Q80.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-QLS2.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-QLS2.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-QLS2.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-QLS2.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-QLS2.5 | < blank > |
| P-ESR-PS-QLS2.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-QLS2.7 | The nominal current of the magnets being powered shall be TBD A |
| P-ESR-PS-QLS2.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-QLS2.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-QLS2.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-QLS2.11 | < blank > |
| P-ESR-PS-QLS2.12 | < blank > |
| P-ESR-PS-QLS2.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-QLS2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-QLS2.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-QLS2.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-QLS2.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-QLS2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-QLS2.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-QLS2.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-QLS2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-QLS2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-QLS2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-QLS2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-QLS2.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-QLS2.26 | < blank > |
| P-ESR-PS-QLS2.27 | < blank > |
| P-ESR-PS-QLS2.28 | < blank > |
| P-ESR-PS-QLS2.29 | < blank > |
| P-ESR-PS-QLS2.30 | < blank > |
| P-ESR-PS-QLS2.31 | < blank > |
| P-ESR-PS-QLS2.32 | < blank > |
| P-ESR-PS-QLS2.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-QLS2.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-QLS2.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-QLS2.36 | The design shall have thermal switches TBD |
| P-ESR-PS-QLS2.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-QLS2.38 | The design shall have water flow switches TBD |
| P-ESR-PS-QLS2.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-QLS2.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-QLS2.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-QLS2.42 | The lead end indications shall be TBD |
| P-ESR-PS-QLS2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-QLS2.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-QLS2.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-QLS2.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-QLS2.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-QLS3.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-QLS3.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-QLS3.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-QLS3.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-QLS3.5 | < blank > |
| P-ESR-PS-QLS3.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-QLS3.7 | The nominal current of the magnets being powered shall be TBD A |
| P-ESR-PS-QLS3.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-QLS3.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-QLS3.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-QLS3.11 | < blank > |
| P-ESR-PS-QLS3.12 | < blank > |
| P-ESR-PS-QLS3.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-QLS3.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-QLS3.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-QLS3.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-QLS3.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-QLS3.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-QLS3.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-QLS3.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-QLS3.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-QLS3.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-QLS3.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-QLS3.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-QLS3.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-QLS3.26 | < blank > |
| P-ESR-PS-QLS3.27 | < blank > |
| P-ESR-PS-QLS3.28 | < blank > |
| P-ESR-PS-QLS3.29 | < blank > |
| P-ESR-PS-QLS3.30 | < blank > |
| P-ESR-PS-QLS3.31 | < blank > |
| P-ESR-PS-QLS3.32 | < blank > |
| P-ESR-PS-QLS3.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-QLS3.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-QLS3.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-QLS3.36 | The design shall have thermal switches TBD |
| P-ESR-PS-QLS3.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-QLS3.38 | The design shall have water flow switches TBD |
| P-ESR-PS-QLS3.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-QLS3.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-QLS3.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-QLS3.42 | The lead end indications shall be TBD |
| P-ESR-PS-QLS3.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-QLS3.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-QLS3.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-QLS3.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-QLS3.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-QSS1.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-QSS1.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-QSS1.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-QSS1.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-QSS1.5 | < blank > |
| P-ESR-PS-QSS1.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-QSS1.7 | The nominal current of the magnets being powered shall be TBD A |
| P-ESR-PS-QSS1.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-QSS1.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-QSS1.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-QSS1.11 | < blank > |
| P-ESR-PS-QSS1.12 | < blank > |
| P-ESR-PS-QSS1.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-QSS1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-QSS1.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-QSS1.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-QSS1.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-QSS1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-QSS1.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-QSS1.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-QSS1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-QSS1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-QSS1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-QSS1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-QSS1.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-QSS1.26 | < blank > |
| P-ESR-PS-QSS1.27 | < blank > |
| P-ESR-PS-QSS1.28 | < blank > |
| P-ESR-PS-QSS1.29 | < blank > |
| P-ESR-PS-QSS1.30 | < blank > |
| P-ESR-PS-QSS1.31 | < blank > |
| P-ESR-PS-QSS1.32 | < blank > |
| P-ESR-PS-QSS1.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-QSS1.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-QSS1.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-QSS1.36 | The design shall have thermal switches TBD |
| P-ESR-PS-QSS1.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-QSS1.38 | The design shall have water flow switches TBD |
| P-ESR-PS-QSS1.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-QSS1.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-QSS1.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-QSS1.42 | The lead end indications shall be TBD |
| P-ESR-PS-QSS1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-QSS1.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-QSS1.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-QSS1.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-QSS1.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-QSS2.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-QSS2.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-QSS2.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-QSS2.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-QSS2.5 | < blank > |
| P-ESR-PS-QSS2.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-QSS2.7 | The nominal current of the magnets being powered shall be TBD A |
| P-ESR-PS-QSS2.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-QSS2.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-QSS2.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-QSS2.11 | < blank > |
| P-ESR-PS-QSS2.12 | < blank > |
| P-ESR-PS-QSS2.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-QSS2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-QSS2.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-QSS2.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-QSS2.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-QSS2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-QSS2.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-QSS2.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-QSS2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-QSS2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-QSS2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-QSS2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-QSS2.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-QSS2.26 | < blank > |
| P-ESR-PS-QSS2.27 | < blank > |
| P-ESR-PS-QSS2.28 | < blank > |
| P-ESR-PS-QSS2.29 | < blank > |
| P-ESR-PS-QSS2.30 | < blank > |
| P-ESR-PS-QSS2.31 | < blank > |
| P-ESR-PS-QSS2.32 | < blank > |
| P-ESR-PS-QSS2.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-QSS2.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-QSS2.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-QSS2.36 | The design shall have thermal switches TBD |
| P-ESR-PS-QSS2.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-QSS2.38 | The design shall have water flow switches TBD |
| P-ESR-PS-QSS2.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-QSS2.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-QSS2.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-QSS2.42 | The lead end indications shall be TBD |
| P-ESR-PS-QSS2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-QSS2.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-QSS2.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-QSS2.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-QSS2.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-QSS3.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-QSS3.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-QSS3.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-QSS3.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-QSS3.5 | < blank > |
| P-ESR-PS-QSS3.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-QSS3.7 | The nominal current of the magnets being powered shall be TBD A |
| P-ESR-PS-QSS3.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-QSS3.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-QSS3.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-QSS3.11 | < blank > |
| P-ESR-PS-QSS3.12 | < blank > |
| P-ESR-PS-QSS3.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-QSS3.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-QSS3.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-QSS3.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-QSS3.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-QSS3.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-QSS3.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-QSS3.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-QSS3.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-QSS3.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-QSS3.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-QSS3.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-QSS3.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-QSS3.26 | < blank > |
| P-ESR-PS-QSS3.27 | < blank > |
| P-ESR-PS-QSS3.28 | < blank > |
| P-ESR-PS-QSS3.29 | < blank > |
| P-ESR-PS-QSS3.30 | < blank > |
| P-ESR-PS-QSS3.31 | < blank > |
| P-ESR-PS-QSS3.32 | < blank > |
| P-ESR-PS-QSS3.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-QSS3.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-QSS3.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-QSS3.36 | The design shall have thermal switches TBD |
| P-ESR-PS-QSS3.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-QSS3.38 | The design shall have water flow switches TBD |
| P-ESR-PS-QSS3.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-QSS3.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-QSS3.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-QSS3.42 | The lead end indications shall be TBD |
| P-ESR-PS-QSS3.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-QSS3.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-QSS3.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-QSS3.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-QSS3.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-QSS4.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-QSS4.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-QSS4.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-QSS4.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-QSS4.5 | < blank > |
| P-ESR-PS-QSS4.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-QSS4.7 | The nominal current of the magnets being powered shall be TBD A |
| P-ESR-PS-QSS4.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-QSS4.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-QSS4.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-QSS4.11 | < blank > |
| P-ESR-PS-QSS4.12 | < blank > |
| P-ESR-PS-QSS4.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-QSS4.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-QSS4.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-QSS4.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-QSS4.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-QSS4.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-QSS4.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-QSS4.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-QSS4.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-QSS4.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-QSS4.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-QSS4.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-QSS4.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-QSS4.26 | < blank > |
| P-ESR-PS-QSS4.27 | < blank > |
| P-ESR-PS-QSS4.28 | < blank > |
| P-ESR-PS-QSS4.29 | < blank > |
| P-ESR-PS-QSS4.30 | < blank > |
| P-ESR-PS-QSS4.31 | < blank > |
| P-ESR-PS-QSS4.32 | < blank > |
| P-ESR-PS-QSS4.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-QSS4.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-QSS4.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-QSS4.36 | The design shall have thermal switches TBD |
| P-ESR-PS-QSS4.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-QSS4.38 | The design shall have water flow switches TBD |
| P-ESR-PS-QSS4.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-QSS4.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-QSS4.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-QSS4.42 | The lead end indications shall be TBD |
| P-ESR-PS-QSS4.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-QSS4.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-QSS4.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-QSS4.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-QSS4.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-QSS5.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-QSS5.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-QSS5.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-QSS5.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-QSS5.5 | < blank > |
| P-ESR-PS-QSS5.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-QSS5.7 | The nominal current of the magnets being powered shall be TBD A |
| P-ESR-PS-QSS5.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-QSS5.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-QSS5.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-QSS5.11 | < blank > |
| P-ESR-PS-QSS5.12 | < blank > |
| P-ESR-PS-QSS5.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-QSS5.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-QSS5.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-QSS5.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-QSS5.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-QSS5.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-QSS5.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-QSS5.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-QSS5.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-QSS5.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-QSS5.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-QSS5.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-QSS5.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-QSS5.26 | < blank > |
| P-ESR-PS-QSS5.27 | < blank > |
| P-ESR-PS-QSS5.28 | < blank > |
| P-ESR-PS-QSS5.29 | < blank > |
| P-ESR-PS-QSS5.30 | < blank > |
| P-ESR-PS-QSS5.31 | < blank > |
| P-ESR-PS-QSS5.32 | < blank > |
| P-ESR-PS-QSS5.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-QSS5.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-QSS5.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-QSS5.36 | The design shall have thermal switches TBD |
| P-ESR-PS-QSS5.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-QSS5.38 | The design shall have water flow switches TBD |
| P-ESR-PS-QSS5.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-QSS5.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-QSS5.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-QSS5.42 | The lead end indications shall be TBD |
| P-ESR-PS-QSS5.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-QSS5.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-QSS5.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-QSS5.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-QSS5.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-SXT.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-SXT.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-SXT.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-SXT.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-SXT.5 | < blank > |
| P-ESR-PS-SXT.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-SXT.7 | < blank > |
| P-ESR-PS-SXT.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-SXT.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-SXT.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-SXT.11 | < blank > |
| P-ESR-PS-SXT.12 | < blank > |
| P-ESR-PS-SXT.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-SXT.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-SXT.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-SXT.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-SXT.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-SXT.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-SXT.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-SXT.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-SXT.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-SXT.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-SXT.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-SXT.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-SXT.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-SXT.26 | < blank > |
| P-ESR-PS-SXT.27 | < blank > |
| P-ESR-PS-SXT.28 | < blank > |
| P-ESR-PS-SXT.29 | < blank > |
| P-ESR-PS-SXT.30 | < blank > |
| P-ESR-PS-SXT.31 | < blank > |
| P-ESR-PS-SXT.32 | < blank > |
| P-ESR-PS-SXT.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-SXT.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-SXT.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-SXT.36 | The design shall have thermal switches TBD |
| P-ESR-PS-SXT.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-SXT.38 | The design shall have water flow switches TBD |
| P-ESR-PS-SXT.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-SXT.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-SXT.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-SXT.42 | The lead end indications shall be TBD |
| P-ESR-PS-SXT.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-SXT.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-SXT.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-SXT.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-SXT.47 | The magnet polarity connections shall be TBD |
| P-ESR-RF-MAIN_RF_SRFCM-FUNDAMENTAL_MODE.74 | The X-axis CM alignment tolerance shall be few 100 um mm |
| P-ESR-RF-MAIN_RF_SRFCM-FUNDAMENTAL_MODE.75 | The Y-axis CM alignment tolerance shall be several millimeters mm |
| P-ESR-RF-MAIN_RF_SRFCM-FUNDAMENTAL_MODE.76 | The Z-axis CM alignment tolerance shall be several millimeters mm |
| P-ESR-RF-MAIN_RF_SRFCM-FUNDAMENTAL_MODE.77 | The Roll CM alignment tolerance shall be N/A deg |
| P-ESR-RF-MAIN_RF_SRFCM-FUNDAMENTAL_MODE.78 | The Pitch CM alignment tolerance shall be TBD deg |
| P-ESR-RF-MAIN_RF_SRFCM-FUNDAMENTAL_MODE.79 | The Yaw CM alignment tolerance shall be TBD deg |
| P-HSR-MAG-AR_CQS(Corr-H).29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-AR_CQS(Corr-HV).29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-AR_CQS(Corr-V).29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-AR_CQS(Quad).29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-AR_CQS(Sxt).29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-AR_D6.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-AR_D8.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-AR_D9.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-BXDS01A.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-CORR_0.5m.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-CQS(Sxt).29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-D5I.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-D5O.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-D5O_D5I.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-D6.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-D8.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-D8_IR02.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-D8_IR06.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-D9.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-H5_QS3.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-IR_Q5.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-IR_Q6.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-IR_Q8.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-IR_Q9.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-IR_VKICKER_0.25.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-KA3.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-Q1.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-Q2.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-Q3.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-Q3PR.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-Q4.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-Q4PR.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-Q5.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-Q5PR.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-Q7.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-Q8.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-Q9.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-SLOWKICK_CORR.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-TQ1.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-TQ2.29 | The magnet shall be design is TBD to have a splittable pole. |
| P-HSR-MAG-TQ3.29 | The magnet shall be design is TBD to have a splittable pole. |
This function not yet implemented.