Requirement Details
Electron Ion Collider
F-ESR.2
Requirement details, history, relationships and interfaces associated with requirement F-ESR.2
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 06/26/2024 11:10 | |||
| Identifier: | F-ESR.2 | WBS: | 6.04 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | ||
| Description: | The minimum dynamic aperture shall be achieved in two optics configurations (60 and 90 degrees betatron phase advance per FODO cell) at all operational beam energies as per [5.9], and with one and with two low-beta insertions. | ||
| Comments: | |||
No archive versions
| Parents | |
| G-ESR.3 | The ESR shall provide electron bunches having the bunch parameters specified in [10] |
| Children | |
| P-ESR-MAG-D13.1 | The number of magnet function shall be 1 |
| P-ESR-MAG-D13.2 | The field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-ESR-MAG-D13.3 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-ESR-MAG-D13.4 | < blank > |
| P-ESR-MAG-D13.5 | < blank > |
| P-ESR-MAG-D13.6 | The min gap shall be 44 m |
| P-ESR-MAG-D13.7 | The good field aperture drx required shall be 23.6548836572489 m |
| P-ESR-MAG-D13.8 | The good field aperture dry required shall be 15.0737224557062 m |
| P-ESR-MAG-D13.9 | The mag length shall be <3.005 m |
| P-ESR-MAG-D13.10 | The eff Length shall be 3.005 m |
| P-ESR-MAG-D13.11 | < blank > |
| P-ESR-MAG-D13.12 | The grad field G shall be 0.235 T/m(n-1) |
| P-ESR-MAG-D13.13 | < blank > |
| P-ESR-MAG-D13.14 | The field stability shall be TBD T/s |
| P-ESR-MAG-D13.15 | The harmonic reference Radius and current shall be Rref=TBD(mm), Iref=TBD(A) (mm,A) |
| P-ESR-MAG-D13.16 | The Field at the reference radius and current shall be Bref=TBD(T) T |
| P-ESR-MAG-D13.17 | < blank > |
| P-ESR-MAG-D13.18 | The Bore multipole content shall have a 1st order of b1=10000 (10^-4) |
| P-ESR-MAG-D13.19 | The Bore multipole content shall have a 2nd order of b2<1 (10^-4) |
| P-ESR-MAG-D13.20 | The Bore multipole content shall have a 3rd order of b3<1 (10^-4) |
| P-ESR-MAG-D13.21 | The Bore multipole content shall have a 4th order of b4<1 (10^-4) |
| P-ESR-MAG-D13.22 | The Bore multipole content shall have a 5th order of b5<1 (10^-4) |
| P-ESR-MAG-D13.23 | The Bore multipole content shall have a 6th order of b6<1 (10^-4) |
| P-ESR-MAG-D13.24 | The Bore multipole content shall have a 7th order of b7<1 (10^-4) |
| P-ESR-MAG-D13.25 | The Bore multipole content shall have a 8th order of b8<1 (10^-4) |
| P-ESR-MAG-D13.26 | The Bore multipole content shall have a 9th order of b9<1 (10^-4) |
| P-ESR-MAG-D13.27 | The Bore multipole content shall have a 10th order of b10<1 (10^-4) |
| P-ESR-MAG-D13.28 | The Bore multipole content shall have a 11th order of b11<1 (10^-4) |
| P-ESR-MAG-D13.29 | The Bore multipole content shall have a 12th order of b12<1 (10^-4) |
| P-ESR-MAG-D13.30 | The Bore multipole content shall have a 13th order of b13<1 (10^-4) |
| P-ESR-MAG-D13.31 | The Bore multipole content shall have a 14th order of b14<1 (10^-4) |
| P-ESR-MAG-D13.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-D13.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-D13.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-D13.35 | < blank > |
| P-ESR-MAG-D13.36 | < blank > |
| P-ESR-MAG-D13.37 | < blank > |
| P-ESR-MAG-D13.38 | < blank > |
| P-ESR-MAG-D13.39 | < blank > |
| P-ESR-MAG-D13.40 | < blank > |
| P-ESR-MAG-D13.41 | < blank > |
| P-ESR-MAG-D13.42 | < blank > |
| P-ESR-MAG-D13.43 | < blank > |
| P-ESR-MAG-D13.44 | < blank > |
| P-ESR-MAG-D13.45 | < blank > |
| P-ESR-MAG-D13.46 | < blank > |
| P-ESR-MAG-D13.47 | < blank > |
| P-ESR-MAG-D13.48 | < blank > |
| P-ESR-MAG-D13.49 | < blank > |
| P-ESR-MAG-D13.50 | < blank > |
| P-ESR-MAG-D13.51 | < blank > |
| P-ESR-MAG-D13.52 | < blank > |
| P-ESR-MAG-D13.53 | < blank > |
| P-ESR-MAG-D13.54 | < blank > |
| P-ESR-MAG-D13.55 | The magnet shall not be designed to constain the external fringe field |
| P-ESR-MAG-D13.56 | < blank > |
| P-ESR-MAG-D2.1 | The number of magnet function shall be 1 |
| P-ESR-MAG-D2.2 | The field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-ESR-MAG-D2.3 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-ESR-MAG-D2.4 | < blank > |
| P-ESR-MAG-D2.5 | < blank > |
| P-ESR-MAG-D2.6 | The min gap shall be 44 m |
| P-ESR-MAG-D2.7 | The good field aperture drx required shall be 22.7758415682658 m |
| P-ESR-MAG-D2.8 | The good field aperture dry required shall be 15.8524296237525 m |
| P-ESR-MAG-D2.9 | The mag length shall be <0.611 m |
| P-ESR-MAG-D2.10 | The eff Length shall be 0.611 m |
| P-ESR-MAG-D2.11 | < blank > |
| P-ESR-MAG-D2.12 | The grad field G shall be 0.236 T/m(n-1) |
| P-ESR-MAG-D2.13 | < blank > |
| P-ESR-MAG-D2.14 | The field stability shall be TBD T/s |
| P-ESR-MAG-D2.15 | The harmonic reference Radius and current shall be Rref=TBD(mm), Iref=TBD(A) (mm,A) |
| P-ESR-MAG-D2.16 | The Field at the reference radius and current shall be Bref=TBD(T) T |
| P-ESR-MAG-D2.17 | < blank > |
| P-ESR-MAG-D2.18 | The Bore multipole content shall have a 1st order of b1=10000 (10^-4) |
| P-ESR-MAG-D2.19 | The Bore multipole content shall have a 2nd order of b2<1 (10^-4) |
| P-ESR-MAG-D2.20 | The Bore multipole content shall have a 3rd order of b3<1 (10^-4) |
| P-ESR-MAG-D2.21 | The Bore multipole content shall have a 4th order of b4<1 (10^-4) |
| P-ESR-MAG-D2.22 | The Bore multipole content shall have a 5th order of b5<1 (10^-4) |
| P-ESR-MAG-D2.23 | The Bore multipole content shall have a 6th order of b6<1 (10^-4) |
| P-ESR-MAG-D2.24 | The Bore multipole content shall have a 7th order of b7<1 (10^-4) |
| P-ESR-MAG-D2.25 | The Bore multipole content shall have a 8th order of b8<1 (10^-4) |
| P-ESR-MAG-D2.26 | The Bore multipole content shall have a 9th order of b9<1 (10^-4) |
| P-ESR-MAG-D2.27 | The Bore multipole content shall have a 10th order of b10<1 (10^-4) |
| P-ESR-MAG-D2.28 | The Bore multipole content shall have a 11th order of b11<1 (10^-4) |
| P-ESR-MAG-D2.29 | The Bore multipole content shall have a 12th order of b12<1 (10^-4) |
| P-ESR-MAG-D2.30 | The Bore multipole content shall have a 13th order of b13<1 (10^-4) |
| P-ESR-MAG-D2.31 | The Bore multipole content shall have a 14th order of b14<1 (10^-4) |
| P-ESR-MAG-D2.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-D2.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-D2.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-D2.35 | < blank > |
| P-ESR-MAG-D2.36 | < blank > |
| P-ESR-MAG-D2.37 | < blank > |
| P-ESR-MAG-D2.38 | < blank > |
| P-ESR-MAG-D2.39 | < blank > |
| P-ESR-MAG-D2.40 | < blank > |
| P-ESR-MAG-D2.41 | < blank > |
| P-ESR-MAG-D2.42 | < blank > |
| P-ESR-MAG-D2.43 | < blank > |
| P-ESR-MAG-D2.44 | < blank > |
| P-ESR-MAG-D2.45 | < blank > |
| P-ESR-MAG-D2.46 | < blank > |
| P-ESR-MAG-D2.47 | < blank > |
| P-ESR-MAG-D2.48 | < blank > |
| P-ESR-MAG-D2.49 | < blank > |
| P-ESR-MAG-D2.50 | < blank > |
| P-ESR-MAG-D2.51 | < blank > |
| P-ESR-MAG-D2.52 | < blank > |
| P-ESR-MAG-D2.53 | < blank > |
| P-ESR-MAG-D2.54 | < blank > |
| P-ESR-MAG-D2.55 | The magnet shall not be designed to constain the external fringe field |
| P-ESR-MAG-D2.56 | < blank > |
| P-ESR-MAG-D_DISP.1 | The number of magnet function shall be 1 |
| P-ESR-MAG-D_DISP.2 | The field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-ESR-MAG-D_DISP.3 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-ESR-MAG-D_DISP.4 | < blank > |
| P-ESR-MAG-D_DISP.5 | < blank > |
| P-ESR-MAG-D_DISP.6 | The min gap shall be 44 m |
| P-ESR-MAG-D_DISP.7 | The good field aperture drx required shall be 19.4041855427765 m |
| P-ESR-MAG-D_DISP.8 | The good field aperture dry required shall be 18.8052427942612 m |
| P-ESR-MAG-D_DISP.9 | The mag length shall be <5.805 m |
| P-ESR-MAG-D_DISP.10 | The eff Length shall be 5.805 m |
| P-ESR-MAG-D_DISP.11 | < blank > |
| P-ESR-MAG-D_DISP.12 | The grad field G shall be 0.233 T/m(n-1) |
| P-ESR-MAG-D_DISP.13 | < blank > |
| P-ESR-MAG-D_DISP.14 | The field stability shall be TBD T/s |
| P-ESR-MAG-D_DISP.15 | The harmonic reference Radius and current shall be Rref=TBD(mm), Iref=TBD(A) (mm,A) |
| P-ESR-MAG-D_DISP.16 | The Field at the reference radius and current shall be Bref=TBD(T) T |
| P-ESR-MAG-D_DISP.17 | < blank > |
| P-ESR-MAG-D_DISP.18 | The Bore multipole content shall have a 1st order of b1=10000 (10^-4) |
| P-ESR-MAG-D_DISP.19 | The Bore multipole content shall have a 2nd order of b2<1 (10^-4) |
| P-ESR-MAG-D_DISP.20 | The Bore multipole content shall have a 3rd order of b3<1 (10^-4) |
| P-ESR-MAG-D_DISP.21 | The Bore multipole content shall have a 4th order of b4<1 (10^-4) |
| P-ESR-MAG-D_DISP.22 | The Bore multipole content shall have a 5th order of b5<1 (10^-4) |
| P-ESR-MAG-D_DISP.23 | The Bore multipole content shall have a 6th order of b6<1 (10^-4) |
| P-ESR-MAG-D_DISP.24 | The Bore multipole content shall have a 7th order of b7<1 (10^-4) |
| P-ESR-MAG-D_DISP.25 | The Bore multipole content shall have a 8th order of b8<1 (10^-4) |
| P-ESR-MAG-D_DISP.26 | The Bore multipole content shall have a 9th order of b9<1 (10^-4) |
| P-ESR-MAG-D_DISP.27 | The Bore multipole content shall have a 10th order of b10<1 (10^-4) |
| P-ESR-MAG-D_DISP.28 | The Bore multipole content shall have a 11th order of b11<1 (10^-4) |
| P-ESR-MAG-D_DISP.29 | The Bore multipole content shall have a 12th order of b12<1 (10^-4) |
| P-ESR-MAG-D_DISP.30 | The Bore multipole content shall have a 13th order of b13<1 (10^-4) |
| P-ESR-MAG-D_DISP.31 | The Bore multipole content shall have a 14th order of b14<1 (10^-4) |
| P-ESR-MAG-D_DISP.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-D_DISP.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-D_DISP.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-D_DISP.35 | < blank > |
| P-ESR-MAG-D_DISP.36 | < blank > |
| P-ESR-MAG-D_DISP.37 | < blank > |
| P-ESR-MAG-D_DISP.38 | < blank > |
| P-ESR-MAG-D_DISP.39 | < blank > |
| P-ESR-MAG-D_DISP.40 | < blank > |
| P-ESR-MAG-D_DISP.41 | < blank > |
| P-ESR-MAG-D_DISP.42 | < blank > |
| P-ESR-MAG-D_DISP.43 | < blank > |
| P-ESR-MAG-D_DISP.44 | < blank > |
| P-ESR-MAG-D_DISP.45 | < blank > |
| P-ESR-MAG-D_DISP.46 | < blank > |
| P-ESR-MAG-D_DISP.47 | < blank > |
| P-ESR-MAG-D_DISP.48 | < blank > |
| P-ESR-MAG-D_DISP.49 | < blank > |
| P-ESR-MAG-D_DISP.50 | < blank > |
| P-ESR-MAG-D_DISP.51 | < blank > |
| P-ESR-MAG-D_DISP.52 | < blank > |
| P-ESR-MAG-D_DISP.53 | < blank > |
| P-ESR-MAG-D_DISP.54 | < blank > |
| P-ESR-MAG-D_DISP.55 | The magnet shall not be designed to constain the external fringe field |
| P-ESR-MAG-D_DISP.56 | < blank > |
| P-ESR-MAG-D_IR3m.1 | The number of magnet function shall be 1 |
| P-ESR-MAG-D_IR3m.2 | The field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-ESR-MAG-D_IR3m.3 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-ESR-MAG-D_IR3m.4 | < blank > |
| P-ESR-MAG-D_IR3m.5 | < blank > |
| P-ESR-MAG-D_IR3m.6 | The min gap shall be 44 m |
| P-ESR-MAG-D_IR3m.7 | The good field aperture drx required shall be 33.2206029876095 m |
| P-ESR-MAG-D_IR3m.8 | The good field aperture dry required shall be 9.78277560196065 m |
| P-ESR-MAG-D_IR3m.9 | The mag length shall be <3.8 m |
| P-ESR-MAG-D_IR3m.10 | The eff Length shall be 3.8 m |
| P-ESR-MAG-D_IR3m.11 | < blank > |
| P-ESR-MAG-D_IR3m.12 | The grad field G shall be 0.084 T/m(n-1) |
| P-ESR-MAG-D_IR3m.13 | < blank > |
| P-ESR-MAG-D_IR3m.14 | The field stability shall be TBD T/s |
| P-ESR-MAG-D_IR3m.15 | The harmonic reference Radius and current shall be Rref=TBD(mm), Iref=TBD(A) (mm,A) |
| P-ESR-MAG-D_IR3m.16 | The Field at the reference radius and current shall be Bref=TBD(T) T |
| P-ESR-MAG-D_IR3m.17 | < blank > |
| P-ESR-MAG-D_IR3m.18 | The Bore multipole content shall have a 1st order of b1=10000 (10^-4) |
| P-ESR-MAG-D_IR3m.19 | The Bore multipole content shall have a 2nd order of b2<1 (10^-4) |
| P-ESR-MAG-D_IR3m.20 | The Bore multipole content shall have a 3rd order of b3<1 (10^-4) |
| P-ESR-MAG-D_IR3m.21 | The Bore multipole content shall have a 4th order of b4<1 (10^-4) |
| P-ESR-MAG-D_IR3m.22 | The Bore multipole content shall have a 5th order of b5<1 (10^-4) |
| P-ESR-MAG-D_IR3m.23 | The Bore multipole content shall have a 6th order of b6<1 (10^-4) |
| P-ESR-MAG-D_IR3m.24 | The Bore multipole content shall have a 7th order of b7<1 (10^-4) |
| P-ESR-MAG-D_IR3m.25 | The Bore multipole content shall have a 8th order of b8<1 (10^-4) |
| P-ESR-MAG-D_IR3m.26 | The Bore multipole content shall have a 9th order of b9<1 (10^-4) |
| P-ESR-MAG-D_IR3m.27 | The Bore multipole content shall have a 10th order of b10<1 (10^-4) |
| P-ESR-MAG-D_IR3m.28 | The Bore multipole content shall have a 11th order of b11<1 (10^-4) |
| P-ESR-MAG-D_IR3m.29 | The Bore multipole content shall have a 12th order of b12<1 (10^-4) |
| P-ESR-MAG-D_IR3m.30 | The Bore multipole content shall have a 13th order of b13<1 (10^-4) |
| P-ESR-MAG-D_IR3m.31 | The Bore multipole content shall have a 14th order of b14<1 (10^-4) |
| P-ESR-MAG-D_IR3m.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-D_IR3m.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-D_IR3m.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-D_IR3m.35 | < blank > |
| P-ESR-MAG-D_IR3m.36 | < blank > |
| P-ESR-MAG-D_IR3m.37 | < blank > |
| P-ESR-MAG-D_IR3m.38 | < blank > |
| P-ESR-MAG-D_IR3m.39 | < blank > |
| P-ESR-MAG-D_IR3m.40 | < blank > |
| P-ESR-MAG-D_IR3m.41 | < blank > |
| P-ESR-MAG-D_IR3m.42 | < blank > |
| P-ESR-MAG-D_IR3m.43 | < blank > |
| P-ESR-MAG-D_IR3m.44 | < blank > |
| P-ESR-MAG-D_IR3m.45 | < blank > |
| P-ESR-MAG-D_IR3m.46 | < blank > |
| P-ESR-MAG-D_IR3m.47 | < blank > |
| P-ESR-MAG-D_IR3m.48 | < blank > |
| P-ESR-MAG-D_IR3m.49 | < blank > |
| P-ESR-MAG-D_IR3m.50 | < blank > |
| P-ESR-MAG-D_IR3m.51 | < blank > |
| P-ESR-MAG-D_IR3m.52 | < blank > |
| P-ESR-MAG-D_IR3m.53 | < blank > |
| P-ESR-MAG-D_IR3m.54 | < blank > |
| P-ESR-MAG-D_IR3m.55 | The magnet shall not be designed to constain the external fringe field |
| P-ESR-MAG-D_IR3m.56 | < blank > |
| P-ESR-MAG-Q50.1 | The number of magnet function shall be 2 |
| P-ESR-MAG-Q50.2 | The field type shall be Qu (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-ESR-MAG-Q50.3 | < blank > |
| P-ESR-MAG-Q50.4 | The field rotation shall be No (No=norm, Sk=skew) |
| P-ESR-MAG-Q50.5 | The min coil inner rad shall be 62.2253967444162 m |
| P-ESR-MAG-Q50.6 | < blank > |
| P-ESR-MAG-Q50.7 | The good field aperture drx required shall be 30.122 m |
| P-ESR-MAG-Q50.8 | The good field aperture dry required shall be 12.605 m |
| P-ESR-MAG-Q50.9 | The mag length shall be <0.25 m |
| P-ESR-MAG-Q50.10 | The eff Length shall be 0.25 m |
| P-ESR-MAG-Q50.11 | < blank > |
| P-ESR-MAG-Q50.12 | The grad field G shall be 0.976 T/m(n-1) |
| P-ESR-MAG-Q50.13 | < blank > |
| P-ESR-MAG-Q50.14 | The field stability shall be TBD T/s |
| P-ESR-MAG-Q50.15 | The harmonic reference Radius and current shall be Rref=TBD(mm), Iref=TBD(A) (mm,A) |
| P-ESR-MAG-Q50.16 | The Field at the reference radius and current shall be Bref=TBD(T) T |
| P-ESR-MAG-Q50.17 | < blank > |
| P-ESR-MAG-Q50.18 | The Bore multipole content shall have a 1st order of b1- (10^-4) |
| P-ESR-MAG-Q50.19 | The Bore multipole content shall have a 2nd order of b2=1000 (10^-4) |
| P-ESR-MAG-Q50.20 | The Bore multipole content shall have a 3rd order of b3<1 (10^-4) |
| P-ESR-MAG-Q50.21 | The Bore multipole content shall have a 4th order of b4<1 (10^-4) |
| P-ESR-MAG-Q50.22 | The Bore multipole content shall have a 5th order of b5<1 (10^-4) |
| P-ESR-MAG-Q50.23 | The Bore multipole content shall have a 6th order of b6<1 (10^-4) |
| P-ESR-MAG-Q50.24 | The Bore multipole content shall have a 7th order of b7<1 (10^-4) |
| P-ESR-MAG-Q50.25 | The Bore multipole content shall have a 8th order of b8<1 (10^-4) |
| P-ESR-MAG-Q50.26 | The Bore multipole content shall have a 9th order of b9<1 (10^-4) |
| P-ESR-MAG-Q50.27 | The Bore multipole content shall have a 10th order of b10<1 (10^-4) |
| P-ESR-MAG-Q50.28 | The Bore multipole content shall have a 11th order of b11<1 (10^-4) |
| P-ESR-MAG-Q50.29 | The Bore multipole content shall have a 12th order of b12<1 (10^-4) |
| P-ESR-MAG-Q50.30 | The Bore multipole content shall have a 13th order of b13<1 (10^-4) |
| P-ESR-MAG-Q50.31 | The Bore multipole content shall have a 14th order of b14<1 (10^-4) |
| P-ESR-MAG-Q50.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-Q50.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-Q50.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-Q50.35 | < blank > |
| P-ESR-MAG-Q50.36 | < blank > |
| P-ESR-MAG-Q50.37 | < blank > |
| P-ESR-MAG-Q50.38 | < blank > |
| P-ESR-MAG-Q50.39 | < blank > |
| P-ESR-MAG-Q50.40 | < blank > |
| P-ESR-MAG-Q50.41 | < blank > |
| P-ESR-MAG-Q50.42 | < blank > |
| P-ESR-MAG-Q50.43 | < blank > |
| P-ESR-MAG-Q50.44 | < blank > |
| P-ESR-MAG-Q50.45 | < blank > |
| P-ESR-MAG-Q50.46 | < blank > |
| P-ESR-MAG-Q50.47 | < blank > |
| P-ESR-MAG-Q50.48 | < blank > |
| P-ESR-MAG-Q50.49 | < blank > |
| P-ESR-MAG-Q50.50 | < blank > |
| P-ESR-MAG-Q50.51 | < blank > |
| P-ESR-MAG-Q50.52 | < blank > |
| P-ESR-MAG-Q50.53 | < blank > |
| P-ESR-MAG-Q50.54 | < blank > |
| P-ESR-MAG-Q50.55 | The magnet shall not be designed to constain the external fringe field |
| P-ESR-MAG-Q50.56 | < blank > |
| P-ESR-MAG-Q60.1 | The number of magnet function shall be 3 |
| P-ESR-MAG-Q60.2 | The field type shall be Qu (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-ESR-MAG-Q60.3 | < blank > |
| P-ESR-MAG-Q60.4 | The field rotation shall be No (No=norm, Sk=skew) |
| P-ESR-MAG-Q60.5 | The min coil inner rad shall be 62.2253967444162 m |
| P-ESR-MAG-Q60.6 | < blank > |
| P-ESR-MAG-Q60.7 | The good field aperture drx required shall be 39.405 m |
| P-ESR-MAG-Q60.8 | The good field aperture dry required shall be 18.339 m |
| P-ESR-MAG-Q60.9 | The mag length shall be <0.6 m |
| P-ESR-MAG-Q60.10 | The eff Length shall be 0.6 m |
| P-ESR-MAG-Q60.11 | < blank > |
| P-ESR-MAG-Q60.12 | The grad field G shall be 13.37 T/m(n-1) |
| P-ESR-MAG-Q60.13 | < blank > |
| P-ESR-MAG-Q60.14 | The field stability shall be TBD T/s |
| P-ESR-MAG-Q60.15 | The harmonic reference Radius and current shall be Rref=TBD(mm), Iref=TBD(A) (mm,A) |
| P-ESR-MAG-Q60.16 | The Field at the reference radius and current shall be Bref=TBD(T) T |
| P-ESR-MAG-Q60.17 | < blank > |
| P-ESR-MAG-Q60.18 | The Bore multipole content shall have a 1st order of b1- (10^-4) |
| P-ESR-MAG-Q60.19 | The Bore multipole content shall have a 2nd order of b2=1000 (10^-4) |
| P-ESR-MAG-Q60.20 | The Bore multipole content shall have a 3rd order of b3<1 (10^-4) |
| P-ESR-MAG-Q60.21 | The Bore multipole content shall have a 4th order of b4<1 (10^-4) |
| P-ESR-MAG-Q60.22 | The Bore multipole content shall have a 5th order of b5<1 (10^-4) |
| P-ESR-MAG-Q60.23 | The Bore multipole content shall have a 6th order of b6<1 (10^-4) |
| P-ESR-MAG-Q60.24 | The Bore multipole content shall have a 7th order of b7<1 (10^-4) |
| P-ESR-MAG-Q60.25 | The Bore multipole content shall have a 8th order of b8<1 (10^-4) |
| P-ESR-MAG-Q60.26 | The Bore multipole content shall have a 9th order of b9<1 (10^-4) |
| P-ESR-MAG-Q60.27 | The Bore multipole content shall have a 10th order of b10<1 (10^-4) |
| P-ESR-MAG-Q60.28 | The Bore multipole content shall have a 11th order of b11<1 (10^-4) |
| P-ESR-MAG-Q60.29 | The Bore multipole content shall have a 12th order of b12<1 (10^-4) |
| P-ESR-MAG-Q60.30 | The Bore multipole content shall have a 13th order of b13<1 (10^-4) |
| P-ESR-MAG-Q60.31 | The Bore multipole content shall have a 14th order of b14<1 (10^-4) |
| P-ESR-MAG-Q60.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-Q60.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-Q60.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-Q60.35 | < blank > |
| P-ESR-MAG-Q60.36 | < blank > |
| P-ESR-MAG-Q60.37 | < blank > |
| P-ESR-MAG-Q60.38 | < blank > |
| P-ESR-MAG-Q60.39 | < blank > |
| P-ESR-MAG-Q60.40 | < blank > |
| P-ESR-MAG-Q60.41 | < blank > |
| P-ESR-MAG-Q60.42 | < blank > |
| P-ESR-MAG-Q60.43 | < blank > |
| P-ESR-MAG-Q60.44 | < blank > |
| P-ESR-MAG-Q60.45 | < blank > |
| P-ESR-MAG-Q60.46 | < blank > |
| P-ESR-MAG-Q60.47 | < blank > |
| P-ESR-MAG-Q60.48 | < blank > |
| P-ESR-MAG-Q60.49 | < blank > |
| P-ESR-MAG-Q60.50 | < blank > |
| P-ESR-MAG-Q60.51 | < blank > |
| P-ESR-MAG-Q60.52 | < blank > |
| P-ESR-MAG-Q60.53 | < blank > |
| P-ESR-MAG-Q60.54 | < blank > |
| P-ESR-MAG-Q60.55 | The magnet shall not be designed to constain the external fringe field |
| P-ESR-MAG-Q60.56 | < blank > |
| P-ESR-MAG-Q80.1 | The number of magnet function shall be 4 |
| P-ESR-MAG-Q80.2 | The field type shall be Qu (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-ESR-MAG-Q80.3 | < blank > |
| P-ESR-MAG-Q80.4 | The field rotation shall be No (No=norm, Sk=skew) |
| P-ESR-MAG-Q80.5 | The min coil inner rad shall be 62.2253967444162 m |
| P-ESR-MAG-Q80.6 | < blank > |
| P-ESR-MAG-Q80.7 | The good field aperture drx required shall be 35.61 m |
| P-ESR-MAG-Q80.8 | The good field aperture dry required shall be 14.168 m |
| P-ESR-MAG-Q80.9 | The mag length shall be <0.8 m |
| P-ESR-MAG-Q80.10 | The eff Length shall be 0.8 m |
| P-ESR-MAG-Q80.11 | < blank > |
| P-ESR-MAG-Q80.12 | The grad field G shall be 12.873 T/m(n-1) |
| P-ESR-MAG-Q80.13 | < blank > |
| P-ESR-MAG-Q80.14 | The field stability shall be TBD T/s |
| P-ESR-MAG-Q80.15 | The harmonic reference Radius and current shall be Rref=TBD(mm), Iref=TBD(A) (mm,A) |
| P-ESR-MAG-Q80.16 | The Field at the reference radius and current shall be Bref=TBD(T) T |
| P-ESR-MAG-Q80.17 | < blank > |
| P-ESR-MAG-Q80.18 | The Bore multipole content shall have a 1st order of b1- (10^-4) |
| P-ESR-MAG-Q80.19 | The Bore multipole content shall have a 2nd order of b2=1000 (10^-4) |
| P-ESR-MAG-Q80.20 | The Bore multipole content shall have a 3rd order of b3<1 (10^-4) |
| P-ESR-MAG-Q80.21 | The Bore multipole content shall have a 4th order of b4<1 (10^-4) |
| P-ESR-MAG-Q80.22 | The Bore multipole content shall have a 5th order of b5<1 (10^-4) |
| P-ESR-MAG-Q80.23 | The Bore multipole content shall have a 6th order of b6<1 (10^-4) |
| P-ESR-MAG-Q80.24 | The Bore multipole content shall have a 7th order of b7<1 (10^-4) |
| P-ESR-MAG-Q80.25 | The Bore multipole content shall have a 8th order of b8<1 (10^-4) |
| P-ESR-MAG-Q80.26 | The Bore multipole content shall have a 9th order of b9<1 (10^-4) |
| P-ESR-MAG-Q80.27 | The Bore multipole content shall have a 10th order of b10<1 (10^-4) |
| P-ESR-MAG-Q80.28 | The Bore multipole content shall have a 11th order of b11<1 (10^-4) |
| P-ESR-MAG-Q80.29 | The Bore multipole content shall have a 12th order of b12<1 (10^-4) |
| P-ESR-MAG-Q80.30 | The Bore multipole content shall have a 13th order of b13<1 (10^-4) |
| P-ESR-MAG-Q80.31 | The Bore multipole content shall have a 14th order of b14<1 (10^-4) |
| P-ESR-MAG-Q80.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-Q80.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-Q80.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-Q80.35 | < blank > |
| P-ESR-MAG-Q80.36 | < blank > |
| P-ESR-MAG-Q80.37 | < blank > |
| P-ESR-MAG-Q80.38 | < blank > |
| P-ESR-MAG-Q80.39 | < blank > |
| P-ESR-MAG-Q80.40 | < blank > |
| P-ESR-MAG-Q80.41 | < blank > |
| P-ESR-MAG-Q80.42 | < blank > |
| P-ESR-MAG-Q80.43 | < blank > |
| P-ESR-MAG-Q80.44 | < blank > |
| P-ESR-MAG-Q80.45 | < blank > |
| P-ESR-MAG-Q80.46 | < blank > |
| P-ESR-MAG-Q80.47 | < blank > |
| P-ESR-MAG-Q80.48 | < blank > |
| P-ESR-MAG-Q80.49 | < blank > |
| P-ESR-MAG-Q80.50 | < blank > |
| P-ESR-MAG-Q80.51 | < blank > |
| P-ESR-MAG-Q80.52 | < blank > |
| P-ESR-MAG-Q80.53 | < blank > |
| P-ESR-MAG-Q80.54 | < blank > |
| P-ESR-MAG-Q80.55 | The magnet shall not be designed to constain the external fringe field |
| P-ESR-MAG-Q80.56 | < blank > |
| P-ESR-MAG-SXT.1 | The number of magnet function shall be 1 |
| P-ESR-MAG-SXT.2 | The field type shall be Sx (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-ESR-MAG-SXT.3 | < blank > |
| P-ESR-MAG-SXT.4 | The field rotation shall be No (No=norm, Sk=skew) |
| P-ESR-MAG-SXT.5 | < blank > |
| P-ESR-MAG-SXT.6 | < blank > |
| P-ESR-MAG-SXT.7 | The good field aperture drx required shall be 28.8425300166208 m |
| P-ESR-MAG-SXT.8 | The good field aperture dry required shall be 11.6824735062842 m |
| P-ESR-MAG-SXT.9 | The mag length shall be <0.24 m |
| P-ESR-MAG-SXT.10 | The eff Length shall be 0.24 m |
| P-ESR-MAG-SXT.11 | < blank > |
| P-ESR-MAG-SXT.12 | The grad field G shall be 138.724 T/m(n-1) |
| P-ESR-MAG-SXT.13 | < blank > |
| P-ESR-MAG-SXT.14 | The field stability shall be TBD T/s |
| P-ESR-MAG-SXT.15 | The harmonic reference Radius and current shall be Rref=TBD(mm), Iref=TBD(A) (mm,A) |
| P-ESR-MAG-SXT.16 | The Field at the reference radius and current shall be Bref=TBD(T) T |
| P-ESR-MAG-SXT.17 | < blank > |
| P-ESR-MAG-SXT.18 | The Bore multipole content shall have a 1st order of b1- (10^-4) |
| P-ESR-MAG-SXT.19 | The Bore multipole content shall have a 2nd order of b2- (10^-4) |
| P-ESR-MAG-SXT.20 | The Bore multipole content shall have a 3rd order of b3=1000 (10^-4) |
| P-ESR-MAG-SXT.21 | The Bore multipole content shall have a 4th order of b4<1 (10^-4) |
| P-ESR-MAG-SXT.22 | The Bore multipole content shall have a 5th order of b5<1 (10^-4) |
| P-ESR-MAG-SXT.23 | The Bore multipole content shall have a 6th order of b6<1 (10^-4) |
| P-ESR-MAG-SXT.24 | The Bore multipole content shall have a 7th order of b7<1 (10^-4) |
| P-ESR-MAG-SXT.25 | The Bore multipole content shall have a 8th order of b8<1 (10^-4) |
| P-ESR-MAG-SXT.26 | The Bore multipole content shall have a 9th order of b9<1 (10^-4) |
| P-ESR-MAG-SXT.27 | The Bore multipole content shall have a 10th order of b10<1 (10^-4) |
| P-ESR-MAG-SXT.28 | The Bore multipole content shall have a 11th order of b11<1 (10^-4) |
| P-ESR-MAG-SXT.29 | The Bore multipole content shall have a 12th order of b12<1 (10^-4) |
| P-ESR-MAG-SXT.30 | The Bore multipole content shall have a 13th order of b13<1 (10^-4) |
| P-ESR-MAG-SXT.31 | The Bore multipole content shall have a 14th order of b14<1 (10^-4) |
| P-ESR-MAG-SXT.32 | The Bore multipole content shall have a 15th order of b15<1 (10^-4) |
| P-ESR-MAG-SXT.33 | The Bore multipole content shall have a 16th order of b16<1 (10^-4) |
| P-ESR-MAG-SXT.34 | The magnet shall not be designed to limit Xtalk requirements |
| P-ESR-MAG-SXT.35 | < blank > |
| P-ESR-MAG-SXT.36 | < blank > |
| P-ESR-MAG-SXT.37 | < blank > |
| P-ESR-MAG-SXT.38 | < blank > |
| P-ESR-MAG-SXT.39 | < blank > |
| P-ESR-MAG-SXT.40 | < blank > |
| P-ESR-MAG-SXT.41 | < blank > |
| P-ESR-MAG-SXT.42 | < blank > |
| P-ESR-MAG-SXT.43 | < blank > |
| P-ESR-MAG-SXT.44 | < blank > |
| P-ESR-MAG-SXT.45 | < blank > |
| P-ESR-MAG-SXT.46 | < blank > |
| P-ESR-MAG-SXT.47 | < blank > |
| P-ESR-MAG-SXT.48 | < blank > |
| P-ESR-MAG-SXT.49 | < blank > |
| P-ESR-MAG-SXT.50 | < blank > |
| P-ESR-MAG-SXT.51 | < blank > |
| P-ESR-MAG-SXT.52 | < blank > |
| P-ESR-MAG-SXT.53 | < blank > |
| P-ESR-MAG-SXT.54 | < blank > |
| P-ESR-MAG-SXT.55 | The magnet shall not be designed to constain the external fringe field |
| P-ESR-MAG-SXT.56 | < blank > |
| P-ESR-PS-D13.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-D13.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-D13.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-D13.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-D13.5 | < blank > |
| P-ESR-PS-D13.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-D13.7 | The nominal current of the magnets being powered shall be 1035 A |
| P-ESR-PS-D13.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-D13.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-D13.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-D13.11 | < blank > |
| P-ESR-PS-D13.12 | < blank > |
| P-ESR-PS-D13.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-D13.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-D13.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-D13.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-D13.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-D13.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-D13.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-D13.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-D13.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-D13.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-D13.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-D13.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-D13.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-D13.26 | < blank > |
| P-ESR-PS-D13.27 | < blank > |
| P-ESR-PS-D13.28 | < blank > |
| P-ESR-PS-D13.29 | < blank > |
| P-ESR-PS-D13.30 | < blank > |
| P-ESR-PS-D13.31 | < blank > |
| P-ESR-PS-D13.32 | < blank > |
| P-ESR-PS-D13.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-D13.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-D13.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-D13.36 | The design shall have thermal switches TBD |
| P-ESR-PS-D13.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-D13.38 | The design shall have water flow switches TBD |
| P-ESR-PS-D13.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-D13.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-D13.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-D13.42 | The lead end indications shall be TBD |
| P-ESR-PS-D13.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-D13.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-D13.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-D13.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-D13.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-D2.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-D2.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-D2.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-D2.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-D2.5 | < blank > |
| P-ESR-PS-D2.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-D2.7 | The nominal current of the magnets being powered shall be 1036 A |
| P-ESR-PS-D2.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-D2.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-D2.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-D2.11 | < blank > |
| P-ESR-PS-D2.12 | < blank > |
| P-ESR-PS-D2.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-D2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-D2.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-D2.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-D2.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-D2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-D2.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-D2.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-D2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-D2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-D2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-D2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-D2.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-D2.26 | < blank > |
| P-ESR-PS-D2.27 | < blank > |
| P-ESR-PS-D2.28 | < blank > |
| P-ESR-PS-D2.29 | < blank > |
| P-ESR-PS-D2.30 | < blank > |
| P-ESR-PS-D2.31 | < blank > |
| P-ESR-PS-D2.32 | < blank > |
| P-ESR-PS-D2.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-D2.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-D2.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-D2.36 | The design shall have thermal switches TBD |
| P-ESR-PS-D2.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-D2.38 | The design shall have water flow switches TBD |
| P-ESR-PS-D2.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-D2.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-D2.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-D2.42 | The lead end indications shall be TBD |
| P-ESR-PS-D2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-D2.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-D2.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-D2.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-D2.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-D_DISP.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-D_DISP.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-D_DISP.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-D_DISP.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-D_DISP.5 | < blank > |
| P-ESR-PS-D_DISP.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-D_DISP.7 | The nominal current of the magnets being powered shall be TBD A |
| P-ESR-PS-D_DISP.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-D_DISP.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-D_DISP.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-D_DISP.11 | < blank > |
| P-ESR-PS-D_DISP.12 | < blank > |
| P-ESR-PS-D_DISP.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-D_DISP.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-D_DISP.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-D_DISP.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-D_DISP.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-D_DISP.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-D_DISP.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-D_DISP.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-D_DISP.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-D_DISP.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-D_DISP.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-D_DISP.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-D_DISP.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-D_DISP.26 | < blank > |
| P-ESR-PS-D_DISP.27 | < blank > |
| P-ESR-PS-D_DISP.28 | < blank > |
| P-ESR-PS-D_DISP.29 | < blank > |
| P-ESR-PS-D_DISP.30 | < blank > |
| P-ESR-PS-D_DISP.31 | < blank > |
| P-ESR-PS-D_DISP.32 | < blank > |
| P-ESR-PS-D_DISP.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-D_DISP.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-D_DISP.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-D_DISP.36 | The design shall have thermal switches TBD |
| P-ESR-PS-D_DISP.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-D_DISP.38 | The design shall have water flow switches TBD |
| P-ESR-PS-D_DISP.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-D_DISP.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-D_DISP.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-D_DISP.42 | The lead end indications shall be TBD |
| P-ESR-PS-D_DISP.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-D_DISP.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-D_DISP.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-D_DISP.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-D_DISP.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-D_IR3m.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-D_IR3m.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-D_IR3m.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-D_IR3m.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-D_IR3m.5 | < blank > |
| P-ESR-PS-D_IR3m.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-D_IR3m.7 | The nominal current of the magnets being powered shall be TBD A |
| P-ESR-PS-D_IR3m.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-D_IR3m.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-D_IR3m.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-D_IR3m.11 | < blank > |
| P-ESR-PS-D_IR3m.12 | < blank > |
| P-ESR-PS-D_IR3m.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-D_IR3m.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-D_IR3m.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-D_IR3m.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-D_IR3m.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-D_IR3m.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-D_IR3m.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-D_IR3m.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-D_IR3m.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-D_IR3m.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-D_IR3m.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-D_IR3m.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-D_IR3m.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-D_IR3m.26 | < blank > |
| P-ESR-PS-D_IR3m.27 | < blank > |
| P-ESR-PS-D_IR3m.28 | < blank > |
| P-ESR-PS-D_IR3m.29 | < blank > |
| P-ESR-PS-D_IR3m.30 | < blank > |
| P-ESR-PS-D_IR3m.31 | < blank > |
| P-ESR-PS-D_IR3m.32 | < blank > |
| P-ESR-PS-D_IR3m.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-D_IR3m.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-D_IR3m.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-D_IR3m.36 | The design shall have thermal switches TBD |
| P-ESR-PS-D_IR3m.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-D_IR3m.38 | The design shall have water flow switches TBD |
| P-ESR-PS-D_IR3m.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-D_IR3m.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-D_IR3m.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-D_IR3m.42 | The lead end indications shall be TBD |
| P-ESR-PS-D_IR3m.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-D_IR3m.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-D_IR3m.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-D_IR3m.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-D_IR3m.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-Q50.1 | The number of Independent functions on the magnets being powered shall be 2 |
| P-ESR-PS-Q50.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-Q50.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-Q50.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-Q50.5 | < blank > |
| P-ESR-PS-Q50.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-Q50.7 | < blank > |
| P-ESR-PS-Q50.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-Q50.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-Q50.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-Q50.11 | < blank > |
| P-ESR-PS-Q50.12 | < blank > |
| P-ESR-PS-Q50.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-Q50.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-Q50.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-Q50.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-Q50.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-Q50.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-Q50.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-Q50.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-Q50.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-Q50.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-Q50.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-Q50.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-Q50.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-Q50.26 | < blank > |
| P-ESR-PS-Q50.27 | < blank > |
| P-ESR-PS-Q50.28 | < blank > |
| P-ESR-PS-Q50.29 | < blank > |
| P-ESR-PS-Q50.30 | < blank > |
| P-ESR-PS-Q50.31 | < blank > |
| P-ESR-PS-Q50.32 | < blank > |
| P-ESR-PS-Q50.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-Q50.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-Q50.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-Q50.36 | The design shall have thermal switches TBD |
| P-ESR-PS-Q50.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-Q50.38 | The design shall have water flow switches TBD |
| P-ESR-PS-Q50.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-Q50.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-Q50.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-Q50.42 | The lead end indications shall be TBD |
| P-ESR-PS-Q50.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-Q50.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-Q50.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-Q50.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-Q50.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-Q60.1 | The number of Independent functions on the magnets being powered shall be 3 |
| P-ESR-PS-Q60.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-Q60.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-Q60.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-Q60.5 | < blank > |
| P-ESR-PS-Q60.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-Q60.7 | < blank > |
| P-ESR-PS-Q60.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-Q60.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-Q60.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-Q60.11 | < blank > |
| P-ESR-PS-Q60.12 | < blank > |
| P-ESR-PS-Q60.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-Q60.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-Q60.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-Q60.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-Q60.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-Q60.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-Q60.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-Q60.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-Q60.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-Q60.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-Q60.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-Q60.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-Q60.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-Q60.26 | < blank > |
| P-ESR-PS-Q60.27 | < blank > |
| P-ESR-PS-Q60.28 | < blank > |
| P-ESR-PS-Q60.29 | < blank > |
| P-ESR-PS-Q60.30 | < blank > |
| P-ESR-PS-Q60.31 | < blank > |
| P-ESR-PS-Q60.32 | < blank > |
| P-ESR-PS-Q60.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-Q60.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-Q60.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-Q60.36 | The design shall have thermal switches TBD |
| P-ESR-PS-Q60.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-Q60.38 | The design shall have water flow switches TBD |
| P-ESR-PS-Q60.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-Q60.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-Q60.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-Q60.42 | The lead end indications shall be TBD |
| P-ESR-PS-Q60.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-Q60.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-Q60.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-Q60.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-Q60.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-Q80.1 | The number of Independent functions on the magnets being powered shall be 4 |
| P-ESR-PS-Q80.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-Q80.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-Q80.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-Q80.5 | < blank > |
| P-ESR-PS-Q80.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-Q80.7 | < blank > |
| P-ESR-PS-Q80.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-Q80.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-Q80.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-Q80.11 | < blank > |
| P-ESR-PS-Q80.12 | < blank > |
| P-ESR-PS-Q80.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-Q80.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-Q80.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-Q80.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-Q80.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-Q80.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-Q80.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-Q80.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-Q80.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-Q80.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-Q80.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-Q80.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-Q80.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-Q80.26 | < blank > |
| P-ESR-PS-Q80.27 | < blank > |
| P-ESR-PS-Q80.28 | < blank > |
| P-ESR-PS-Q80.29 | < blank > |
| P-ESR-PS-Q80.30 | < blank > |
| P-ESR-PS-Q80.31 | < blank > |
| P-ESR-PS-Q80.32 | < blank > |
| P-ESR-PS-Q80.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-Q80.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-Q80.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-Q80.36 | The design shall have thermal switches TBD |
| P-ESR-PS-Q80.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-Q80.38 | The design shall have water flow switches TBD |
| P-ESR-PS-Q80.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-Q80.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-Q80.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-Q80.42 | The lead end indications shall be TBD |
| P-ESR-PS-Q80.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-Q80.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-Q80.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-Q80.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-Q80.47 | The magnet polarity connections shall be TBD |
| P-ESR-PS-SXT.1 | The number of Independent functions on the magnets being powered shall be 1 |
| P-ESR-PS-SXT.2 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-ESR-PS-SXT.3 | The maximum magnet string inductance to be powered shall be TBD H |
| P-ESR-PS-SXT.4 | The magnets being powered shall be saturated TBD Y/N |
| P-ESR-PS-SXT.5 | < blank > |
| P-ESR-PS-SXT.6 | The voltage to ground of the magnet being powered shall be TBD V |
| P-ESR-PS-SXT.7 | < blank > |
| P-ESR-PS-SXT.8 | The minimum current the PS must operate at shall be TBD A |
| P-ESR-PS-SXT.9 | The maximum current the PS must operate at shall be TBD A |
| P-ESR-PS-SXT.10 | The PS current type shall be NC (DC or AC) |
| P-ESR-PS-SXT.11 | < blank > |
| P-ESR-PS-SXT.12 | < blank > |
| P-ESR-PS-SXT.13 | The full power bandwidth required shall be TBD |
| P-ESR-PS-SXT.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-ESR-PS-SXT.15 | The time period for specified stability shall be TBD s |
| P-ESR-PS-SXT.16 | The short term stability shall be TBD A/s |
| P-ESR-PS-SXT.17 | The long term stability shall be TBD A/s |
| P-ESR-PS-SXT.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-ESR-PS-SXT.19 | The synchronization required between PS's shall be TBD s |
| P-ESR-PS-SXT.20 | The synchronization timing of synchronization shall be TBD s |
| P-ESR-PS-SXT.21 | The max allowable current ripple (peak to peak) TBD A |
| P-ESR-PS-SXT.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-ESR-PS-SXT.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-ESR-PS-SXT.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-ESR-PS-SXT.25 | An NMR shall be required to measure the field TBD A/s |
| P-ESR-PS-SXT.26 | < blank > |
| P-ESR-PS-SXT.27 | < blank > |
| P-ESR-PS-SXT.28 | < blank > |
| P-ESR-PS-SXT.29 | < blank > |
| P-ESR-PS-SXT.30 | < blank > |
| P-ESR-PS-SXT.31 | < blank > |
| P-ESR-PS-SXT.32 | < blank > |
| P-ESR-PS-SXT.33 | The current required to be shunted through the magnet shall be TBD |
| P-ESR-PS-SXT.34 | The magnet turns ratio shall be TBD |
| P-ESR-PS-SXT.35 | The terminal voltage shall be TBD V |
| P-ESR-PS-SXT.36 | The design shall have thermal switches TBD |
| P-ESR-PS-SXT.37 | The thermal switch connection numbers shall be TBD |
| P-ESR-PS-SXT.38 | The design shall have water flow switches TBD |
| P-ESR-PS-SXT.39 | The water flow switch connections numbers shall be TBD |
| P-ESR-PS-SXT.40 | The design shall have access controls interlocks TBD |
| P-ESR-PS-SXT.41 | The main terminals lug details shall be TBD |
| P-ESR-PS-SXT.42 | The lead end indications shall be TBD |
| P-ESR-PS-SXT.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-ESR-PS-SXT.44 | The lug details for the auxiliary windings shall be TBD |
| P-ESR-PS-SXT.45 | The A/B terminal labeling details shall be TBD |
| P-ESR-PS-SXT.46 | The magnet drawing with terminations details shall be TBD Draw id |
| P-ESR-PS-SXT.47 | The magnet polarity connections shall be TBD |
| P-ESR-VAC.10 | The maximum beam excursion orbit shall be TBD |
| P-ESR-VAC.11 | The beam current is an input for the interlocks. The threshold shall be adjusted during commissioning and operations. |
This function not yet implemented.