Requirement Details
Electron Ion Collider
P-ESR-PS-QSS1.3
Requirement details, history, relationships and interfaces associated with requirement P-ESR-PS-QSS1.3
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 01/28/2025 17:40 | |||
| Identifier: | P-ESR-PS-QSS1.3 | WBS: | 6.04.04 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | The maximum magnet string inductance to be powered shall be TBD H | ||
| Comments: | |||
| Record Date: 01/27/2025 16:43 | |||
| Identifier: | P-ESR-PS-QSS1.3 | WBS: | 6.06.02.03 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | The maximum magnet string inductance to be powered shall be TBD H | ||
| Comments: | |||
| Parents | |
| F-ESR.03 | The ESR shall support two low-beta insertions (colliding beam interaction regions) at IRs 06 and 08. |
| F-ESR.04 | The ESR alignment requirements are established by dynamic aperture and polarization tracking. The ESR RMS alignment tolerances shall be such that all the beam parameter listed in the MPT can be satisfied. [Document#:EIC-SEG-RSI-005] |
| F-ESR.10 | The ESR shall include a system to absorb the energy of bunches which are periodically and continually ejected from the ESR to accommodate freshly polarized bunches. |
| F-IR-ESR-LATTICE.15 | It shall be possible to remove any horizontal/transverse coupling introduced due to the detector solenoid and ESR ring tilt in the IR electron lattice. |
| F-IR-ESR-LATTICE.18 | The IR electron lattice design shall remove the dependence of spin on the horizontal amplitude of the particles. |
| F-IR.2 | The IR shall guide the hadron and electron beams to collide at the IP of IR6. |
| F-IR.4 | The IR electron and hadron beam lines shall have the linear lattice functions matched to the incoming and outgoing arcs of the ESR and HSR respectively. |
| F-IR.8 | The IR shall be designed to ensure the hadron and electron beam collisions at the IP meet all the performance requirements set forth in [5.8]. |
| F-IR.9 | The IR shall be designed so that the electron and hadron beams have the same cross-sectional area and maximum overlap to achieve the high luminosities required in [5.8]. |
| F-IR.11 | The IR operational uptime shall match the operational uptime requirements of the EIC. |
| Children | |
| No children. | |
This function not yet implemented.