Requirement Details
Electron Ion Collider
P-ESR-PS-QLS3.42
Requirement details, history, relationships and interfaces associated with requirement P-ESR-PS-QLS3.42
- CURRENT RECORD
- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
Record Date: 12/06/2024 11:10 | |||
Identifier: | P-ESR-PS-QLS3.42 | WBS: | 6.06.02.03 |
Date Modified: | TBD: | FALSE | |
Status Date: | Status: | In Process | |
Description: | The lead end indications shall be TBD | ||
Comments: |
No archive versions
Parents | |
F-ESR.3 | The ESR shall support two low-beta insertions (colliding beam interaction regions) at IRs 6 and 8. |
F-ESR.4 | The ESR alignment requirements are established by dynamic aperture and polarization tracking. The ESR RMS alignment tolerances shall be such that all the beam parameter listed in [5.9] can be satisfied. |
F-ESR.10 | The ESRÂ shall include a system to absorb the energy of bunches which are periodically ejected from the ESR to accommodate freshly polarized bunches. |
F-IR-ESR-LATTICE.15 | It shall be possible to remove any horizontal/transverse coupling introduced due to the detector solenoid and ESR ring tilt in the IR electron lattice. |
F-IR-ESR-LATTICE.18 | The IR electron lattice design shall remove the dependence of spin on the horizontal amplitude of the particles. |
F-IR.2 | The IR shall guide the hadron and electron beams to collide at the IP of IR6. |
F-IR.4 | The IR electron and hadron beam lines shall have the linear lattice functions matched to the incoming and outgoing arcs of the ESR and HSR respectively. |
F-IR.8 | The IR shall be designed to ensure the hadron and electron beam collisions at the IP meet all the performance requirements set forth in [5.8]. |
F-IR.9 | The IR shall be designed so that the electron and hadron beams have the same cross-sectional area and maximum overlap to achieve the high luminosities required in [5.8]. |
F-IR.11 | The IR operational uptime shall match the operational uptime requirements of the EIC. |
Children | |
No children. |
This function not yet implemented.