Click to open or close... Double-click to open or close all.

F-ESR-MAG.09

Requirement details, history, relationships and interfaces associated with requirement F-ESR-MAG.09

CURRENT RECORD

Record Date: 03/12/2025 18:56
Identifier:	F-ESR-MAG.09	WBS:	6.04
Date Modified:		TBD:	FALSE
Status Date:		Status:	Approved
Description:	All dipoles in the ESR, including those in IRs 6 and 8, shall be connected in series to a single main power supply.
Comments:

ARCHIVE RECORDS

Record Date: 03/03/2025 18:11
Identifier:	F-ESR-MAG.9	WBS:	6.04
Date Modified:		TBD:	FALSE
Status Date:		Status:	Approved
Description:	The ESR Shall have a conventional orbit corrector scheme, with single-plane correctors located at the respective quadrupoles.The strength of these correctors needs to be chosen to correct for any source of orbit distortion and should have enough margin for beam based diagnostic purposes, Harmonic Spin bumps and emittance generating bumps.
Comments:

Record Date: 02/24/2025 18:26
Identifier:	F-ESR-MAG.9	WBS:	6.04
Date Modified:		TBD:	FALSE
Status Date:		Status:	Approved
Description:	The ESR Shall have a conventional orbit corrector scheme, with single-plane correctors located at the respective quadrupoles.The strength of these correctors needs to be chosen to correct for any source of orbit distortion and should have enough margin for beam based diagnostic purposes, Harmonic Spin bumps,emittance generating bumps.
Comments:

Record Date: 01/27/2025 16:43
Identifier:	F-ESR-MAG.9	WBS:	6.04
Date Modified:		TBD:	FALSE
Status Date:		Status:	Reviewed
Description:	The ESR Shall have a conventional orbit corrector scheme, with single-plane correctors located at the respective quadrupoles.The strength of these correctors needs to be chosen to correct for any source of orbit distortion and should have enough margin for beam based diagnostic purposes, Harmonic Spin bumps,emittance generating bumps.
Comments:

RELATIONSHIPS

Parents
G-ESR.03	The ESR shall provide electron bunches having the bunch parameters specified in the MPT. [Document#:EIC-SEG-RSI-005]
G-ESR.04	The ESR shall have an average arc bending radius of approximately 380 meters
G-ESR.05	The ESR electron beam shall orbit in the clockwise direction as seen from above.
G-ESR.07	The ESR shall have a circumference such that the revolution frequency of the stored electron beam matches the revolution frequency of 133 GeV protons stored in the HSR, with the proton beam orbit centered in the HSR beampipe.
G-ESR.08	The ESR shall use the “inner” aisle (closest to the inner tunnel wall) of the tunnel from IR4 to IR6 and from IR8 to IR12, and the “outer” aisle (closest to the outer tunnel wall) from IR12 to IR4 and IR6 to IR8
Children
P-ESR-PS-SXT.1	The number of Independent functions on the magnets being powered shall be 1
P-ESR-PS-SXT.2	The maximum magnet string resistance to be powered shall be TBD ohm
P-ESR-PS-SXT.3	The maximum magnet string inductance to be powered shall be TBD H
P-ESR-PS-SXT.4	The magnets being powered shall be saturated TBD Y/N
P-ESR-PS-SXT.6	The voltage to ground of the magnet being powered shall be TBD V
P-ESR-PS-SXT.8	The minimum current the PS must operate at shall be TBD A
P-ESR-PS-SXT.9	The maximum current the PS must operate at shall be TBD A
P-ESR-PS-SXT.10	The PS current type shall be NC (DC or AC)
P-ESR-PS-SXT.13	The full power bandwidth required shall be TBD
P-ESR-PS-SXT.14	The ppm of full scale current (peak to peak) shall be TBD %
P-ESR-PS-SXT.15	The time period for specified stability shall be TBD s
P-ESR-PS-SXT.16	The short term stability shall be TBD A/s
P-ESR-PS-SXT.17	The long term stability shall be TBD A/s
P-ESR-PS-SXT.18	The current setpoint resolution (min size in bits) shall be TBD bits
P-ESR-PS-SXT.19	The synchronization required between PS's shall be TBD s
P-ESR-PS-SXT.20	The synchronization timing of synchronization shall be TBD s
P-ESR-PS-SXT.21	The max allowable current ripple (peak to peak) TBD A
P-ESR-PS-SXT.22	The max current ripple frequency range (Hz) TBD Hz
P-ESR-PS-SXT.23	WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz
P-ESR-PS-SXT.24	The max voltage ripple (peak to peak) shall be TBD V
P-ESR-PS-SXT.25	An NMR shall be required to measure the field TBD A/s
P-ESR-PS-SXT.33	The current required to be shunted through the magnet shall be TBD
P-ESR-PS-SXT.35	The terminal voltage shall be TBD V
P-ESR-PS-SXT.34	The magnet turns ratio shall be TBD
P-ESR-PS-SXT.36	The design shall have thermal switches TBD

INTERFACES

This function not yet implemented.