P-ESR-MAG-QSS3.26

Requirement details, history, relationships and interfaces associated with requirement P-ESR-MAG-QSS3.26

No archive versions

Parents
F-ESR.4	The ESR alignment requirements are established by dynamic aperture and polarization tracking. The ESR RMS alignment tolerances shall be such that all the beam parameter listed in [5.9] can be satisfied.
F-ESR.3	The ESR shall support two low-beta insertions (colliding beam interaction regions) at IRs 6 and 8.
F-ESR.10	The ESRshall include a system to absorb the energy of bunches which are periodically ejected from the ESR to accommodate freshly polarized bunches.
F-IR-ESR-LATTICE.15	It shall be possible to remove any horizontal/transverse coupling introduced due to the detector solenoid and ESR ring tilt in the IR electron lattice.
F-IR-ESR-LATTICE.18	The IR electron lattice design shall remove the dependence of spin on the horizontal amplitude of the particles.
F-IR.2	The IR shall guide the hadron and electron beams to collide at the IP of IR6.
F-IR.4	The IR electron and hadron beam lines shall have the linear lattice functions matched to the incoming and outgoing arcs of the ESR and HSR respectively.
F-IR.8	The IR shall be designed to ensure the hadron and electron beam collisions at the IP meet all the performance requirements set forth in [5.8].
F-IR.9	The IR shall be designed so that the electron and hadron beams have the same cross-sectional area and maximum overlap to achieve the high luminosities required in [5.8].
F-IR.11	The IR operational uptime shall match the operational uptime requirements of the EIC.
Children
No children.

This function not yet implemented.