Requirement Details
Electron Ion Collider
F-EIS-TLINE-GUN-INST-Diagnostic.4
Requirement details, history, relationships and interfaces associated with requirement F-EIS-TLINE-GUN-INST-Diagnostic.4
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 03/20/2025 17:29 | |||
| Identifier: | F-EIS-TLINE-GUN-INST-Diagnostic.4 | WBS: | 6.03.04 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | The Faraday cup shall be able to measure the charge of the electron bunches from the gun. | ||
| Comments: | |||
No archive versions
| Parents | |
| G-EIS.2 | The EIS shall provide an electron beam having sufficient energy to meet the ESR beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
| G-EIS.3 | The EIS shall provide an electron beam with the RMS bunch momentum spread at extraction which meet the ESR beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
| G-EIS.4 | The EIS pre-injector shall provide an electron beam to the ESR having a horizontal beam emittance which is compatible with operation of the ESR. |
| G-EIS.5 | The EIS pre-injector shall provide an electron beam to the ESR having a vertical beam emittance which is compatible with operation of the ESR. |
| G-EIS.6 | The EIS shall inject into the ESR at a rate of 1[Hz]. |
| G-EIS.7 | The EIS shall inject one bunch into the ESR whilst being able to provide 1 bunch per injection cycle. |
| G-EIS.8 | The EIS shall provide an electron beam to the ESR having RMS Bunch lengths at extraction to meet beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
| G-EIS.9 | The EIS shall provide an electron beam to the ESR having the bunch charge at extraction to meet the beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
| G-EIS.10 | The EIS bunch replacement process shall deliver polarized replacement bunches capable of creating all the ESR polarization patterns needed to meet the physics goals. |
| Children | |
| P-EIS-GUN-INST-F_CUP.02 | The Faraday cup electronics shall require < 3 kW supplied from one 110 Vac, 20 Amp single chase circuit |
| P-EIS-GUN-INST-F_CUP.01 | The Faraday cup shall be able to measure the charge of the electron bunches from the gun over a charge range of 0.1 - 14 nC |
| P-EIS-GUN-INST-F_CUP.03 | The Faraday cup power dissipation shall be less that 1 W |
This function not yet implemented.