Requirement Details
Electron Ion Collider
F-EIS-RCS-PPD.1
Requirement details, history, relationships and interfaces associated with requirement F-EIS-RCS-PPD.1
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 12/06/2024 11:10 | |||
| Identifier: | F-EIS-RCS-PPD.1 | WBS: | 6.03 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | The beam injection of the electron bunches from the RCS into the ESR ring shall take place in the 12 o’clock straight section. | ||
| Comments: | |||
No archive versions
| Parents | |
| G-EIS.2 | The EIS shall provide an electron beam having sufficient energy to meet the ESR beam requirements as set forth in [5.9]. |
| G-EIS.3 | The EIS shall provide an electron beam with the RMS bunch momentum spreads at extraction which meet the ESR beam requirements as set forth in [5.9]. |
| G-EIS.4 | The EIS pre-injector shall provide an electron beam to the ESR having a horizontal beam emittance which is compatible with operation of the ESR. |
| G-EIS.5 | The EIS pre-injector shall provide an electron beam to the ESR having a vertical beam emittance which is compatible with operation of the ESR. |
| G-EIS.6 | The EIS shall inject into the ESR at a rate of 1[Hz]. |
| G-EIS.7 | The EIS shall inject one bunch into the ESR whilst being able to provide 2 bunches per injection cycle. |
| G-EIS.9 | The EIS shall provide an electron beam to the ESR having the bunch charge at extraction to meet the beam requirements as set forth in [5.9]. |
| G-EIS.8 | The EIS shall provide an electron beam to the ESR having RMS Bunch lengths at extraction to meet beam requirements as set forth in [5.9]. |
| G-EIS.10 | The ESR bunch replacement pattern will be defined by 1.the required polarization pattern to be provided to the experiments, 2.decay rates and 3. The RF cogging limitations of the beam transfer between RCS and ESR. |
| Children | |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.1 | The location (Section) shall be 12 o'clock |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.2 | The dimension in W shall be 4 (ft) |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.3 | The dimension in L shall be 10 (ft) |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.4 | The dimension in H shall be 7 (ft) |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.5 | The num magnets shall be 3 - |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.6 | The mag gap shall be tbd (cm) |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.7 | The rise time shall be 0.001 (sec) |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.8 | The fall time shall be 0.001 (sec) |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.9 | The flat top time shall be 0.0015 (sec) |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.10 | The waveshape shall be trap |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.11 | The flat top repeatability shall be tbd % |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.12 | The uniformity of the flattop shall be tbd (V) |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.13 | The deflecting Angle shall be 1.2 (mRad) |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.14 | The rep rate spec shall be TBD (Hz) |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.15 | The output voltage Spec shall be 50 (Hz) |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.16 | The output current spec shall be 600 (Amps) |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.17 | The inductance with cable shall be 26 (uH) |
| P-EIS-RCS-PPD-EXT_PULSE_KICK.18 | The cooling type shall be water |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.1 | The location (Section) type shall be 12 o'clock |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.2 | The dimension in W type shall be 4 (ft) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.3 | The dimension in L type shall be 10 (ft) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.4 | The dimension in H type shall be 7 (ft) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.5 | The num magnets type shall be 2 - |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.6 | The mag gap type shall be tbd (cm) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.7 | The rise time type shall be 0.002 (sec) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.8 | The fall time type shall be 0.002 (sec) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.9 | The flat top time type shall be 0.0015 (sec) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.10 | The waveshape type shall be trap |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.11 | The flat top repeatability type shall be tbd % |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.12 | The uniformity of the flattop type shall be tbd (V) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.13 | The deflecting Angle type shall be 30 0 |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.14 | The rep rate spec type shall be TBD (Hz) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.15 | The output voltage Spec type shall be 80 (Hz) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.16 | The output current spec type shall be 1200 0 |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.17 | The inductance with cable type shall be 40 (uH) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.18 | The cooling type type shall be water |
| P-EIS-RCS-PPD-EXT_RF_KICK.1 | The location (Section) shall be 12 o'clock |
| P-EIS-RCS-PPD-EXT_RF_KICK.2 | The dimension in W shall be 5 (ft) |
| P-EIS-RCS-PPD-EXT_RF_KICK.3 | The dimension in L shall be 15 (ft) |
| P-EIS-RCS-PPD-EXT_RF_KICK.4 | The dimension in H shall be 7 (ft) |
| P-EIS-RCS-PPD-EXT_RF_KICK.5 | The num magnets shall be 1 - |
| P-EIS-RCS-PPD-EXT_RF_KICK.6 | The mag gap shall be tbd (cm) |
| P-EIS-RCS-PPD-EXT_RF_KICK.7 | The rise time shall be 0.000002 (sec) |
| P-EIS-RCS-PPD-EXT_RF_KICK.8 | The fall time shall be 0.00001 (sec) |
| P-EIS-RCS-PPD-EXT_RF_KICK.9 | The flat top time shall be 0.00000001 (sec) |
| P-EIS-RCS-PPD-EXT_RF_KICK.10 | The waveshape shall be 2 pulses/cycle |
| P-EIS-RCS-PPD-EXT_RF_KICK.11 | The flat top repeatability shall be tbd % |
| P-EIS-RCS-PPD-EXT_RF_KICK.12 | The uniformity of the flattop shall be tbd (V) |
| P-EIS-RCS-PPD-EXT_RF_KICK.13 | The deflecting Angle shall be 1.2 0 |
| P-EIS-RCS-PPD-EXT_RF_KICK.14 | The rep rate spec shall be TBD (Hz) |
| P-EIS-RCS-PPD-EXT_RF_KICK.15 | The output voltage Spec shall be 5000 (Hz) |
| P-EIS-RCS-PPD-EXT_RF_KICK.16 | The output current spec shall be 2300 0 |
| P-EIS-RCS-PPD-EXT_RF_KICK.17 | The inductance with cable shall be 4 (uH) |
| P-EIS-RCS-PPD-EXT_RF_KICK.18 | The cooling type type shall be water |
This function not yet implemented.