Requirement Details
Electron Ion Collider
F-EIS-RCS-PPD-SEPT.1
Requirement details, history, relationships and interfaces associated with requirement F-EIS-RCS-PPD-SEPT.1
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 03/17/2025 17:06 | |||
| Identifier: | F-EIS-RCS-PPD-SEPT.1 | WBS: | 6.03.03 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | Not Applicable | |
| Description: | The fast bump magnets and Fast Kicker shall operate in unison with a septum magnet which can direct the beam into the HETL. | ||
| Comments: | |||
| Record Date: 01/27/2025 16:43 | |||
| Identifier: | F-EIS-RCS-PPD-SEPT.1 | WBS: | 6.03.03 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | The fast bump magnets and Fast Kicker shall operate in unison with a septum magnet which can direct the beam into the HETL. | ||
| Comments: | |||
| Parents | |
| G-EIS.2 | The EIS shall provide an electron beam having sufficient energy to meet the ESR beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
| G-EIS.3 | The EIS shall provide an electron beam with the RMS bunch momentum spread at extraction which meet the ESR beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
| G-EIS.9 | The EIS shall provide an electron beam to the ESR having the bunch charge at extraction to meet the beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
| G-EIS.4 | The EIS pre-injector shall provide an electron beam to the ESR having a horizontal beam emittance which is compatible with operation of the ESR. |
| G-EIS.5 | The EIS pre-injector shall provide an electron beam to the ESR having a vertical beam emittance which is compatible with operation of the ESR. |
| G-EIS.6 | The EIS shall inject into the ESR at a rate of 1[Hz]. |
| G-EIS.7 | The EIS shall inject one bunch into the ESR whilst being able to provide 1 bunch per injection cycle. |
| G-EIS.8 | The EIS shall provide an electron beam to the ESR having RMS Bunch lengths at extraction to meet beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
| G-EIS.10 | The EIS bunch replacement process shall deliver polarized replacement bunches capable of creating all the ESR polarization patterns needed to meet the physics goals. |
| Children | |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.01 | The location (Section) type shall be 12 o'clock |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.02 | The dimension in W type shall be 4 (ft) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.03 | The dimension in L type shall be 10 (ft) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.04 | The dimension in H type shall be 7 (ft) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.05 | The num magnets type shall be 2 - |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.06 | The mag gap type shall be tbd (cm) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.07 | The rise time type shall be 0.002 (sec) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.08 | The fall time type shall be 0.002 (sec) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.09 | The flat top time type shall be 0.0015 (sec) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.10 | The waveshape type shall be trap |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.11 | The flat top repeatability type shall be tbd % |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.12 | The uniformity of the flattop type shall be tbd (V) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.13 | The deflecting Angle type shall be 30 0 |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.14 | The rep rate spec type shall be TBD (Hz) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.15 | The output voltage Spec type shall be 80 (Hz) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.17 | The inductance with cable type shall be 40 (uH) |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.16 | The output current spec type shall be 1200 0 |
| P-EIS-RCS-PPD-EXT_PULSE_SEPT.18 | The cooling type type shall be water |
This function not yet implemented.