Requirement Details
Electron Ion Collider
F-EIS-RCS-MAG.13
Requirement details, history, relationships and interfaces associated with requirement F-EIS-RCS-MAG.13
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 05/16/2025 17:04 | |||
| Identifier: | F-EIS-RCS-MAG.13 | WBS: | 6.03.02 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | There shall be only one family of dipoles in the RCS. | ||
| Comments: | |||
| Record Date: 05/15/2025 20:34 | |||
| Identifier: | F-EIS-RCS-MAG.13 | WBS: | |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | ||
| Description: | There shall be only one family of dipoles in the RCS. | ||
| Comments: | |||
| Record Date: 03/24/2025 16:54 | |||
| Identifier: | F-EIS-RCS-MAG.13 | WBS: | 6.03.02 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | There shall be only one family of dipoles in the RCS. | ||
| Comments: | |||
| Parents | |
| G-EIS.6 | The EIS shall inject into the ESR at a rate of 1[Hz]. |
| Children | |
| P-EIS-HETL-MAG-D1.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-D1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-D1.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-D1.4 | < blank > |
| P-EIS-HETL-MAG-D1.5 | < blank > |
| P-EIS-HETL-MAG-D1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-D1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-D1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-D1.09 | The magnet length shall be <1 m |
| P-EIS-HETL-MAG-D1.10 | The magnet slot length shall be 1 m |
| P-EIS-HETL-MAG-D1.11 | The magnets dipole field B shall be 1.512 T |
| P-EIS-HETL-MAG-D1.12 | < blank > |
| P-EIS-HETL-MAG-D1.13 | < blank > |
| P-EIS-HETL-MAG-D1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-D1.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-D1.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-D1.17 | < blank > |
| P-EIS-HETL-MAG-D1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-D1.35 | < blank > |
| P-EIS-HETL-MAG-D1.36 | < blank > |
| P-EIS-HETL-MAG-D1.37 | < blank > |
| P-EIS-HETL-MAG-D1.38 | < blank > |
| P-EIS-HETL-MAG-D1.39 | < blank > |
| P-EIS-HETL-MAG-D1.40 | < blank > |
| P-EIS-HETL-MAG-D1.41 | < blank > |
| P-EIS-HETL-MAG-D1.42 | < blank > |
| P-EIS-HETL-MAG-D1.43 | < blank > |
| P-EIS-HETL-MAG-D1.44 | < blank > |
| P-EIS-HETL-MAG-D1.45 | < blank > |
| P-EIS-HETL-MAG-D1.46 | < blank > |
| P-EIS-HETL-MAG-D1.47 | < blank > |
| P-EIS-HETL-MAG-D1.48 | < blank > |
| P-EIS-HETL-MAG-D1.49 | < blank > |
| P-EIS-HETL-MAG-D1.50 | < blank > |
| P-EIS-HETL-MAG-D1.51 | < blank > |
| P-EIS-HETL-MAG-D1.52 | < blank > |
| P-EIS-HETL-MAG-D1.53 | < blank > |
| P-EIS-HETL-MAG-D1.54 | < blank > |
| P-EIS-HETL-MAG-D1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-D1.56 | < blank > |
| P-EIS-HETL-MAG-D2.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-D2.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-D2.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-D2.4 | < blank > |
| P-EIS-HETL-MAG-D2.5 | < blank > |
| P-EIS-HETL-MAG-D2.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-D2.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-D2.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-D2.09 | The magnet length shall be <2.99 m |
| P-EIS-HETL-MAG-D2.10 | The magnet slot length shall be 2.99 m |
| P-EIS-HETL-MAG-D2.11 | The magnets dipole field B shall be 0.193 T |
| P-EIS-HETL-MAG-D2.12 | < blank > |
| P-EIS-HETL-MAG-D2.13 | < blank > |
| P-EIS-HETL-MAG-D2.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-D2.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-D2.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-D2.17 | < blank > |
| P-EIS-HETL-MAG-D2.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-D2.35 | < blank > |
| P-EIS-HETL-MAG-D2.36 | < blank > |
| P-EIS-HETL-MAG-D2.37 | < blank > |
| P-EIS-HETL-MAG-D2.38 | < blank > |
| P-EIS-HETL-MAG-D2.39 | < blank > |
| P-EIS-HETL-MAG-D2.40 | < blank > |
| P-EIS-HETL-MAG-D2.41 | < blank > |
| P-EIS-HETL-MAG-D2.42 | < blank > |
| P-EIS-HETL-MAG-D2.43 | < blank > |
| P-EIS-HETL-MAG-D2.44 | < blank > |
| P-EIS-HETL-MAG-D2.45 | < blank > |
| P-EIS-HETL-MAG-D2.46 | < blank > |
| P-EIS-HETL-MAG-D2.47 | < blank > |
| P-EIS-HETL-MAG-D2.48 | < blank > |
| P-EIS-HETL-MAG-D2.49 | < blank > |
| P-EIS-HETL-MAG-D2.50 | < blank > |
| P-EIS-HETL-MAG-D2.51 | < blank > |
| P-EIS-HETL-MAG-D2.52 | < blank > |
| P-EIS-HETL-MAG-D2.53 | < blank > |
| P-EIS-HETL-MAG-D2.54 | < blank > |
| P-EIS-HETL-MAG-D2.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-D2.56 | < blank > |
| P-EIS-HETL-MAG-D3.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-D3.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-D3.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-D3.4 | < blank > |
| P-EIS-HETL-MAG-D3.5 | < blank > |
| P-EIS-HETL-MAG-D3.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-D3.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-D3.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-D3.09 | The magnet length shall be <2 m |
| P-EIS-HETL-MAG-D3.10 | The magnet slot length shall be 2 m |
| P-EIS-HETL-MAG-D3.11 | The magnets dipole field B shall be 0.525 T |
| P-EIS-HETL-MAG-D3.12 | < blank > |
| P-EIS-HETL-MAG-D3.13 | < blank > |
| P-EIS-HETL-MAG-D3.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-D3.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-D3.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-D3.17 | < blank > |
| P-EIS-HETL-MAG-D3.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-D3.35 | < blank > |
| P-EIS-HETL-MAG-D3.36 | < blank > |
| P-EIS-HETL-MAG-D3.37 | < blank > |
| P-EIS-HETL-MAG-D3.38 | < blank > |
| P-EIS-HETL-MAG-D3.39 | < blank > |
| P-EIS-HETL-MAG-D3.40 | < blank > |
| P-EIS-HETL-MAG-D3.41 | < blank > |
| P-EIS-HETL-MAG-D3.42 | < blank > |
| P-EIS-HETL-MAG-D3.43 | < blank > |
| P-EIS-HETL-MAG-D3.44 | < blank > |
| P-EIS-HETL-MAG-D3.45 | < blank > |
| P-EIS-HETL-MAG-D3.46 | < blank > |
| P-EIS-HETL-MAG-D3.47 | < blank > |
| P-EIS-HETL-MAG-D3.48 | < blank > |
| P-EIS-HETL-MAG-D3.49 | < blank > |
| P-EIS-HETL-MAG-D3.50 | < blank > |
| P-EIS-HETL-MAG-D3.51 | < blank > |
| P-EIS-HETL-MAG-D3.52 | < blank > |
| P-EIS-HETL-MAG-D3.53 | < blank > |
| P-EIS-HETL-MAG-D3.54 | < blank > |
| P-EIS-HETL-MAG-D3.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-D3.56 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.01 | The number of magnet functions shall be 1 |
| P-EIS-HETL-MAG-ESR_INJ_BMP.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.4 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.5 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-ESR_INJ_BMP.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-ESR_INJ_BMP.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-ESR_INJ_BMP.09 | The magnet length shall be <0.1 m |
| P-EIS-HETL-MAG-ESR_INJ_BMP.10 | The magnet slot length shall be 0.1 m |
| P-EIS-HETL-MAG-ESR_INJ_BMP.11 | The magnets dipole field B shall be 0.06 T |
| P-EIS-HETL-MAG-ESR_INJ_BMP.12 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.13 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-ESR_INJ_BMP.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.17 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.34 | The magnet shall be designed to limit Xtalk Requirements N (Yes or No) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.35 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.36 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.37 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.38 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.39 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.40 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.41 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.42 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.43 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.44 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.45 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.46 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.47 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.48 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.49 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.50 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.51 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.52 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.53 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.54 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.55 | The magnet design shall constrain the ext. fringe field N (Yes or No) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.56 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-INDSEPT1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-INDSEPT1.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-INDSEPT1.4 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.5 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-INDSEPT1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-INDSEPT1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-INDSEPT1.09 | The magnet length shall be <1 m |
| P-EIS-HETL-MAG-INDSEPT1.10 | The magnet slot length shall be 1 m |
| P-EIS-HETL-MAG-INDSEPT1.11 | The magnets dipole field B shall be 1.051 T |
| P-EIS-HETL-MAG-INDSEPT1.12 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.13 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-INDSEPT1.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-INDSEPT1.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-INDSEPT1.17 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-INDSEPT1.35 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.36 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.37 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.38 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.39 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.40 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.41 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.42 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.43 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.44 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.45 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.46 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.47 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.48 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.49 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.50 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.51 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.52 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.53 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.54 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.55 | The magnets shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-INDSEPT1.56 | < blank > |
| P-EIS-HETL-MAG-KH1.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-KH1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-KH1.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-KH1.4 | < blank > |
| P-EIS-HETL-MAG-KH1.5 | < blank > |
| P-EIS-HETL-MAG-KH1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-KH1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-KH1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-KH1.09 | The magnet length shall be <0.1 m |
| P-EIS-HETL-MAG-KH1.10 | The magnet slot length shall be 0.1 m |
| P-EIS-HETL-MAG-KH1.11 | The magnets dipole field B shall be 0.076 T |
| P-EIS-HETL-MAG-KH1.12 | < blank > |
| P-EIS-HETL-MAG-KH1.13 | < blank > |
| P-EIS-HETL-MAG-KH1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-KH1.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-KH1.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-KH1.17 | < blank > |
| P-EIS-HETL-MAG-KH1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-KH1.35 | < blank > |
| P-EIS-HETL-MAG-KH1.36 | < blank > |
| P-EIS-HETL-MAG-KH1.37 | < blank > |
| P-EIS-HETL-MAG-KH1.38 | < blank > |
| P-EIS-HETL-MAG-KH1.39 | < blank > |
| P-EIS-HETL-MAG-KH1.40 | < blank > |
| P-EIS-HETL-MAG-KH1.41 | < blank > |
| P-EIS-HETL-MAG-KH1.42 | < blank > |
| P-EIS-HETL-MAG-KH1.43 | < blank > |
| P-EIS-HETL-MAG-KH1.44 | < blank > |
| P-EIS-HETL-MAG-KH1.45 | < blank > |
| P-EIS-HETL-MAG-KH1.46 | < blank > |
| P-EIS-HETL-MAG-KH1.47 | < blank > |
| P-EIS-HETL-MAG-KH1.48 | < blank > |
| P-EIS-HETL-MAG-KH1.49 | < blank > |
| P-EIS-HETL-MAG-KH1.50 | < blank > |
| P-EIS-HETL-MAG-KH1.51 | < blank > |
| P-EIS-HETL-MAG-KH1.52 | < blank > |
| P-EIS-HETL-MAG-KH1.53 | < blank > |
| P-EIS-HETL-MAG-KH1.54 | < blank > |
| P-EIS-HETL-MAG-KH1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-KH1.56 | < blank > |
| P-EIS-HETL-MAG-KV1.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-KV1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-KV1.03 | The field direction shall be H (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-KV1.4 | < blank > |
| P-EIS-HETL-MAG-KV1.5 | < blank > |
| P-EIS-HETL-MAG-KV1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-KV1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-KV1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-KV1.09 | The magnet length shall be <0.1 m |
| P-EIS-HETL-MAG-KV1.10 | The magnet slot length shall be 0.1 m |
| P-EIS-HETL-MAG-KV1.11 | The magnets dipole field B shall be 0.076 T |
| P-EIS-HETL-MAG-KV1.12 | < blank > |
| P-EIS-HETL-MAG-KV1.13 | < blank > |
| P-EIS-HETL-MAG-KV1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-KV1.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-KV1.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-KV1.17 | < blank > |
| P-EIS-HETL-MAG-KV1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-KV1.35 | < blank > |
| P-EIS-HETL-MAG-KV1.36 | < blank > |
| P-EIS-HETL-MAG-KV1.37 | < blank > |
| P-EIS-HETL-MAG-KV1.38 | < blank > |
| P-EIS-HETL-MAG-KV1.39 | < blank > |
| P-EIS-HETL-MAG-KV1.40 | < blank > |
| P-EIS-HETL-MAG-KV1.41 | < blank > |
| P-EIS-HETL-MAG-KV1.42 | < blank > |
| P-EIS-HETL-MAG-KV1.43 | < blank > |
| P-EIS-HETL-MAG-KV1.44 | < blank > |
| P-EIS-HETL-MAG-KV1.45 | < blank > |
| P-EIS-HETL-MAG-KV1.46 | < blank > |
| P-EIS-HETL-MAG-KV1.47 | < blank > |
| P-EIS-HETL-MAG-KV1.48 | < blank > |
| P-EIS-HETL-MAG-KV1.49 | < blank > |
| P-EIS-HETL-MAG-KV1.50 | < blank > |
| P-EIS-HETL-MAG-KV1.51 | < blank > |
| P-EIS-HETL-MAG-KV1.52 | < blank > |
| P-EIS-HETL-MAG-KV1.53 | < blank > |
| P-EIS-HETL-MAG-KV1.54 | < blank > |
| P-EIS-HETL-MAG-KV1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-KV1.56 | < blank > |
| P-EIS-HETL-MAG-Q1.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-Q1.02 | The magnet field type shall be Qu (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-Q1.3 | < blank > |
| P-EIS-HETL-MAG-Q1.04 | The magnet field rotation shall be No (No=norm, Sk=skew) |
| P-EIS-HETL-MAG-Q1.05 | The magnet minimal coil inner radius shall be 16 m |
| P-EIS-HETL-MAG-Q1.6 | < blank > |
| P-EIS-HETL-MAG-Q1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-Q1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-Q1.09 | The magnet length shall be <0.6 m |
| P-EIS-HETL-MAG-Q1.10 | The magnet slot length shall be 0.6 m |
| P-EIS-HETL-MAG-Q1.11 | < blank > |
| P-EIS-HETL-MAG-Q1.12 | The magnets gradiant field G shall be 23.75 T/m |
| P-EIS-HETL-MAG-Q1.13 | < blank > |
| P-EIS-HETL-MAG-Q1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-Q1.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-Q1.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-Q1.17 | < blank > |
| P-EIS-HETL-MAG-Q1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-Q1.35 | < blank > |
| P-EIS-HETL-MAG-Q1.36 | < blank > |
| P-EIS-HETL-MAG-Q1.37 | < blank > |
| P-EIS-HETL-MAG-Q1.38 | < blank > |
| P-EIS-HETL-MAG-Q1.39 | < blank > |
| P-EIS-HETL-MAG-Q1.40 | < blank > |
| P-EIS-HETL-MAG-Q1.41 | < blank > |
| P-EIS-HETL-MAG-Q1.42 | < blank > |
| P-EIS-HETL-MAG-Q1.43 | < blank > |
| P-EIS-HETL-MAG-Q1.44 | < blank > |
| P-EIS-HETL-MAG-Q1.45 | < blank > |
| P-EIS-HETL-MAG-Q1.46 | < blank > |
| P-EIS-HETL-MAG-Q1.47 | < blank > |
| P-EIS-HETL-MAG-Q1.48 | < blank > |
| P-EIS-HETL-MAG-Q1.49 | < blank > |
| P-EIS-HETL-MAG-Q1.50 | < blank > |
| P-EIS-HETL-MAG-Q1.51 | < blank > |
| P-EIS-HETL-MAG-Q1.52 | < blank > |
| P-EIS-HETL-MAG-Q1.53 | < blank > |
| P-EIS-HETL-MAG-Q1.54 | < blank > |
| P-EIS-HETL-MAG-Q1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-Q1.56 | < blank > |
| P-EIS-HETL-MAG-SEPT1.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-SEPT1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-SEPT1.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-SEPT1.4 | < blank > |
| P-EIS-HETL-MAG-SEPT1.5 | < blank > |
| P-EIS-HETL-MAG-SEPT1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-SEPT1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-SEPT1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-SEPT1.09 | The magnet length shall be <1.3 m |
| P-EIS-HETL-MAG-SEPT1.10 | The magnet slot length shall be 1.3 m |
| P-EIS-HETL-MAG-SEPT1.11 | The magnets dipole field B shall be 0.924 T |
| P-EIS-HETL-MAG-SEPT1.12 | < blank > |
| P-EIS-HETL-MAG-SEPT1.13 | < blank > |
| P-EIS-HETL-MAG-SEPT1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-SEPT1.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-SEPT1.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-SEPT1.17 | < blank > |
| P-EIS-HETL-MAG-SEPT1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-SEPT1.35 | < blank > |
| P-EIS-HETL-MAG-SEPT1.36 | < blank > |
| P-EIS-HETL-MAG-SEPT1.37 | < blank > |
| P-EIS-HETL-MAG-SEPT1.38 | < blank > |
| P-EIS-HETL-MAG-SEPT1.39 | < blank > |
| P-EIS-HETL-MAG-SEPT1.40 | < blank > |
| P-EIS-HETL-MAG-SEPT1.41 | < blank > |
| P-EIS-HETL-MAG-SEPT1.42 | < blank > |
| P-EIS-HETL-MAG-SEPT1.43 | < blank > |
| P-EIS-HETL-MAG-SEPT1.44 | < blank > |
| P-EIS-HETL-MAG-SEPT1.45 | < blank > |
| P-EIS-HETL-MAG-SEPT1.46 | < blank > |
| P-EIS-HETL-MAG-SEPT1.47 | < blank > |
| P-EIS-HETL-MAG-SEPT1.48 | < blank > |
| P-EIS-HETL-MAG-SEPT1.49 | < blank > |
| P-EIS-HETL-MAG-SEPT1.50 | < blank > |
| P-EIS-HETL-MAG-SEPT1.51 | < blank > |
| P-EIS-HETL-MAG-SEPT1.52 | < blank > |
| P-EIS-HETL-MAG-SEPT1.53 | < blank > |
| P-EIS-HETL-MAG-SEPT1.54 | < blank > |
| P-EIS-HETL-MAG-SEPT1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-SEPT1.56 | < blank > |
| P-EIS-HETL-MAG-SEPT2.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-SEPT2.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-SEPT2.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-SEPT2.4 | < blank > |
| P-EIS-HETL-MAG-SEPT2.5 | < blank > |
| P-EIS-HETL-MAG-SEPT2.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-SEPT2.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-SEPT2.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-SEPT2.09 | The magnet length shall be <2.49 m |
| P-EIS-HETL-MAG-SEPT2.10 | The magnet slot length shall be 2.49 m |
| P-EIS-HETL-MAG-SEPT2.11 | The magnets dipole field B shall be 0.82 T |
| P-EIS-HETL-MAG-SEPT2.12 | < blank > |
| P-EIS-HETL-MAG-SEPT2.13 | < blank > |
| P-EIS-HETL-MAG-SEPT2.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-SEPT2.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-SEPT2.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-SEPT2.17 | < blank > |
| P-EIS-HETL-MAG-SEPT2.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-SEPT2.35 | < blank > |
| P-EIS-HETL-MAG-SEPT2.36 | < blank > |
| P-EIS-HETL-MAG-SEPT2.37 | < blank > |
| P-EIS-HETL-MAG-SEPT2.38 | < blank > |
| P-EIS-HETL-MAG-SEPT2.39 | < blank > |
| P-EIS-HETL-MAG-SEPT2.40 | < blank > |
| P-EIS-HETL-MAG-SEPT2.41 | < blank > |
| P-EIS-HETL-MAG-SEPT2.42 | < blank > |
| P-EIS-HETL-MAG-SEPT2.43 | < blank > |
| P-EIS-HETL-MAG-SEPT2.44 | < blank > |
| P-EIS-HETL-MAG-SEPT2.45 | < blank > |
| P-EIS-HETL-MAG-SEPT2.46 | < blank > |
| P-EIS-HETL-MAG-SEPT2.47 | < blank > |
| P-EIS-HETL-MAG-SEPT2.48 | < blank > |
| P-EIS-HETL-MAG-SEPT2.49 | < blank > |
| P-EIS-HETL-MAG-SEPT2.50 | < blank > |
| P-EIS-HETL-MAG-SEPT2.51 | < blank > |
| P-EIS-HETL-MAG-SEPT2.52 | < blank > |
| P-EIS-HETL-MAG-SEPT2.53 | < blank > |
| P-EIS-HETL-MAG-SEPT2.54 | < blank > |
| P-EIS-HETL-MAG-SEPT2.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-SEPT2.56 | < blank > |
| P-EIS-HETL-PS-D1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-D1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-D1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-D1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-D1.5 | < blank > |
| P-EIS-HETL-PS-D1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-D1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-D1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-D1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-D1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-D1.11 | < blank > |
| P-EIS-HETL-PS-D1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-D1.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-D1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-D1.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-D1.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-D1.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-D1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-D1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-D1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-D1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-D1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-D1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-D1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-D1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-D1.26 | < blank > |
| P-EIS-HETL-PS-D1.27 | < blank > |
| P-EIS-HETL-PS-D1.28 | < blank > |
| P-EIS-HETL-PS-D1.29 | < blank > |
| P-EIS-HETL-PS-D1.30 | < blank > |
| P-EIS-HETL-PS-D1.31 | < blank > |
| P-EIS-HETL-PS-D1.32 | < blank > |
| P-EIS-HETL-PS-D1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-D1.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-D1.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-D1.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-D1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-D1.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-D1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-D1.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-D1.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-D1.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-D1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-D1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-D1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-D1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-D1.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-D2.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-D2.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-D2.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-D2.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-D2.5 | < blank > |
| P-EIS-HETL-PS-D2.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-D2.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-D2.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-D2.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-D2.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-D2.11 | < blank > |
| P-EIS-HETL-PS-D2.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-D2.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-D2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-D2.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-D2.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-D2.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-D2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-D2.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-D2.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-D2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-D2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-D2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-D2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-D2.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-D2.26 | < blank > |
| P-EIS-HETL-PS-D2.27 | < blank > |
| P-EIS-HETL-PS-D2.28 | < blank > |
| P-EIS-HETL-PS-D2.29 | < blank > |
| P-EIS-HETL-PS-D2.30 | < blank > |
| P-EIS-HETL-PS-D2.31 | < blank > |
| P-EIS-HETL-PS-D2.32 | < blank > |
| P-EIS-HETL-PS-D2.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-D2.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-D2.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-D2.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-D2.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-D2.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-D2.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-D2.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-D2.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-D2.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-D2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-D2.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-D2.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-D2.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-D2.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-D3.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-D3.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-D3.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-D3.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-D3.5 | < blank > |
| P-EIS-HETL-PS-D3.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-D3.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-D3.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-D3.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-D3.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-D3.11 | < blank > |
| P-EIS-HETL-PS-D3.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-D3.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-D3.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-D3.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-D3.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-D3.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-D3.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-D3.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-D3.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-D3.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-D3.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-D3.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-D3.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-D3.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-D3.26 | < blank > |
| P-EIS-HETL-PS-D3.27 | < blank > |
| P-EIS-HETL-PS-D3.28 | < blank > |
| P-EIS-HETL-PS-D3.29 | < blank > |
| P-EIS-HETL-PS-D3.30 | < blank > |
| P-EIS-HETL-PS-D3.31 | < blank > |
| P-EIS-HETL-PS-D3.32 | < blank > |
| P-EIS-HETL-PS-D3.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-D3.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-D3.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-D3.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-D3.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-D3.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-D3.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-D3.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-D3.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-D3.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-D3.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-D3.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-D3.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-D3.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-D3.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-ESR_INJ_BMP.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-ESR_INJ_BMP.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-ESR_INJ_BMP.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-ESR_INJ_BMP.5 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-ESR_INJ_BMP.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-ESR_INJ_BMP.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-ESR_INJ_BMP.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-ESR_INJ_BMP.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-ESR_INJ_BMP.11 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-ESR_INJ_BMP.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-ESR_INJ_BMP.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-ESR_INJ_BMP.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-ESR_INJ_BMP.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-ESR_INJ_BMP.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-ESR_INJ_BMP.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-ESR_INJ_BMP.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-ESR_INJ_BMP.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-ESR_INJ_BMP.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-ESR_INJ_BMP.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-ESR_INJ_BMP.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-ESR_INJ_BMP.26 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.27 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.28 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.29 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.30 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.31 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.32 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-ESR_INJ_BMP.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-ESR_INJ_BMP.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-INDSEPT1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-INDSEPT1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-INDSEPT1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-INDSEPT1.5 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-INDSEPT1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-INDSEPT1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-INDSEPT1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-INDSEPT1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-INDSEPT1.11 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-INDSEPT1.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-INDSEPT1.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-INDSEPT1.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-INDSEPT1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-INDSEPT1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-INDSEPT1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-INDSEPT1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-INDSEPT1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-INDSEPT1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-INDSEPT1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-INDSEPT1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-INDSEPT1.26 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.27 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.28 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.29 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.30 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.31 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.32 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-INDSEPT1.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-INDSEPT1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-INDSEPT1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-INDSEPT1.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-INDSEPT1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-KH1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-KH1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-KH1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-KH1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-KH1.5 | < blank > |
| P-EIS-HETL-PS-KH1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-KH1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-KH1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-KH1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-KH1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-KH1.11 | < blank > |
| P-EIS-HETL-PS-KH1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-KH1.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-KH1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-KH1.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-KH1.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-KH1.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-KH1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-KH1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-KH1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-KH1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-KH1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-KH1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-KH1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-KH1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-KH1.26 | < blank > |
| P-EIS-HETL-PS-KH1.27 | < blank > |
| P-EIS-HETL-PS-KH1.28 | < blank > |
| P-EIS-HETL-PS-KH1.29 | < blank > |
| P-EIS-HETL-PS-KH1.30 | < blank > |
| P-EIS-HETL-PS-KH1.31 | < blank > |
| P-EIS-HETL-PS-KH1.32 | < blank > |
| P-EIS-HETL-PS-KH1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-KH1.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-KH1.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-KH1.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-KH1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-KH1.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-KH1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-KH1.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-KH1.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-KH1.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-KH1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-KH1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-KH1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-KH1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-KH1.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-KV1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-KV1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-KV1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-KV1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-KV1.5 | < blank > |
| P-EIS-HETL-PS-KV1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-KV1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-KV1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-KV1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-KV1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-KV1.11 | < blank > |
| P-EIS-HETL-PS-KV1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-KV1.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-KV1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-KV1.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-KV1.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-KV1.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-KV1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-KV1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-KV1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-KV1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-KV1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-KV1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-KV1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-KV1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-KV1.26 | < blank > |
| P-EIS-HETL-PS-KV1.27 | < blank > |
| P-EIS-HETL-PS-KV1.28 | < blank > |
| P-EIS-HETL-PS-KV1.29 | < blank > |
| P-EIS-HETL-PS-KV1.30 | < blank > |
| P-EIS-HETL-PS-KV1.31 | < blank > |
| P-EIS-HETL-PS-KV1.32 | < blank > |
| P-EIS-HETL-PS-KV1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-KV1.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-KV1.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-KV1.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-KV1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-KV1.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-KV1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-KV1.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-KV1.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-KV1.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-KV1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-KV1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-KV1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-KV1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-KV1.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-Q1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-Q1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-Q1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-Q1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-Q1.5 | < blank > |
| P-EIS-HETL-PS-Q1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-Q1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-Q1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-Q1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-Q1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-Q1.11 | < blank > |
| P-EIS-HETL-PS-Q1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-Q1.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-Q1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-Q1.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-Q1.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-Q1.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-Q1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-Q1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-Q1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-Q1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-Q1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-Q1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-Q1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-Q1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-Q1.26 | < blank > |
| P-EIS-HETL-PS-Q1.27 | < blank > |
| P-EIS-HETL-PS-Q1.28 | < blank > |
| P-EIS-HETL-PS-Q1.29 | < blank > |
| P-EIS-HETL-PS-Q1.30 | < blank > |
| P-EIS-HETL-PS-Q1.31 | < blank > |
| P-EIS-HETL-PS-Q1.32 | < blank > |
| P-EIS-HETL-PS-Q1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-Q1.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-Q1.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-Q1.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-Q1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-Q1.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-Q1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-Q1.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-Q1.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-Q1.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-Q1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-Q1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-Q1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-Q1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-Q1.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-SEPT1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-SEPT1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-SEPT1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-SEPT1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-SEPT1.5 | < blank > |
| P-EIS-HETL-PS-SEPT1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-SEPT1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-SEPT1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-SEPT1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-SEPT1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-SEPT1.11 | < blank > |
| P-EIS-HETL-PS-SEPT1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-SEPT1.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-SEPT1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-SEPT1.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-SEPT1.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-SEPT1.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-SEPT1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-SEPT1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-SEPT1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-SEPT1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-SEPT1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-SEPT1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-SEPT1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-SEPT1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-SEPT1.26 | < blank > |
| P-EIS-HETL-PS-SEPT1.27 | < blank > |
| P-EIS-HETL-PS-SEPT1.28 | < blank > |
| P-EIS-HETL-PS-SEPT1.29 | < blank > |
| P-EIS-HETL-PS-SEPT1.30 | < blank > |
| P-EIS-HETL-PS-SEPT1.31 | < blank > |
| P-EIS-HETL-PS-SEPT1.32 | < blank > |
| P-EIS-HETL-PS-SEPT1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-SEPT1.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-SEPT1.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-SEPT1.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-SEPT1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-SEPT1.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-SEPT1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-SEPT1.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-SEPT1.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-SEPT1.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-SEPT1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-SEPT1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-SEPT1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-SEPT1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-SEPT1.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-SEPT2.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-SEPT2.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-SEPT2.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-SEPT2.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-SEPT2.5 | < blank > |
| P-EIS-HETL-PS-SEPT2.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-SEPT2.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-SEPT2.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-SEPT2.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-SEPT2.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-SEPT2.11 | < blank > |
| P-EIS-HETL-PS-SEPT2.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-SEPT2.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-SEPT2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-SEPT2.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-SEPT2.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-SEPT2.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-SEPT2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-SEPT2.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-SEPT2.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-SEPT2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-SEPT2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-SEPT2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-SEPT2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-SEPT2.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-SEPT2.26 | < blank > |
| P-EIS-HETL-PS-SEPT2.27 | < blank > |
| P-EIS-HETL-PS-SEPT2.28 | < blank > |
| P-EIS-HETL-PS-SEPT2.29 | < blank > |
| P-EIS-HETL-PS-SEPT2.30 | < blank > |
| P-EIS-HETL-PS-SEPT2.31 | < blank > |
| P-EIS-HETL-PS-SEPT2.32 | < blank > |
| P-EIS-HETL-PS-SEPT2.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-SEPT2.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-SEPT2.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-SEPT2.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-SEPT2.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-SEPT2.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-SEPT2.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-SEPT2.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-SEPT2.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-SEPT2.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-SEPT2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-SEPT2.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-SEPT2.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-SEPT2.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-SEPT2.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-MAG-DH1.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-DH1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-DH1.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-DH1.4 | < blank > |
| P-EIS-METL-MAG-DH1.5 | < blank > |
| P-EIS-METL-MAG-DH1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-METL-MAG-DH1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-DH1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-DH1.09 | The magnet length shall be <0.825 m |
| P-EIS-METL-MAG-DH1.10 | The magnet slot length shall be 0.825 m |
| P-EIS-METL-MAG-DH1.11 | The magnets dipole field B shall be 1.399 T |
| P-EIS-METL-MAG-DH1.12 | < blank > |
| P-EIS-METL-MAG-DH1.13 | < blank > |
| P-EIS-METL-MAG-DH1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-DH1.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-DH1.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-DH1.17 | |
| P-EIS-METL-MAG-DH1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-DH1.35 | < blank > |
| P-EIS-METL-MAG-DH1.36 | < blank > |
| P-EIS-METL-MAG-DH1.37 | < blank > |
| P-EIS-METL-MAG-DH1.38 | < blank > |
| P-EIS-METL-MAG-DH1.39 | < blank > |
| P-EIS-METL-MAG-DH1.40 | < blank > |
| P-EIS-METL-MAG-DH1.41 | < blank > |
| P-EIS-METL-MAG-DH1.42 | < blank > |
| P-EIS-METL-MAG-DH1.43 | < blank > |
| P-EIS-METL-MAG-DH1.44 | < blank > |
| P-EIS-METL-MAG-DH1.45 | < blank > |
| P-EIS-METL-MAG-DH1.46 | < blank > |
| P-EIS-METL-MAG-DH1.47 | < blank > |
| P-EIS-METL-MAG-DH1.48 | < blank > |
| P-EIS-METL-MAG-DH1.49 | < blank > |
| P-EIS-METL-MAG-DH1.50 | < blank > |
| P-EIS-METL-MAG-DH1.51 | < blank > |
| P-EIS-METL-MAG-DH1.52 | < blank > |
| P-EIS-METL-MAG-DH1.53 | < blank > |
| P-EIS-METL-MAG-DH1.54 | < blank > |
| P-EIS-METL-MAG-DH1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-DH1.56 | < blank > |
| P-EIS-METL-MAG-DH2.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-DH2.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-DH2.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-DH2.4 | < blank > |
| P-EIS-METL-MAG-DH2.5 | < blank > |
| P-EIS-METL-MAG-DH2.06 | The magnet minimal gap shall be 32 m |
| P-EIS-METL-MAG-DH2.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-DH2.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-DH2.09 | The magnet length shall be <0.5455 m |
| P-EIS-METL-MAG-DH2.10 | The magnet slot length shall be 0.5455 m |
| P-EIS-METL-MAG-DH2.11 | The magnets dipole field B shall be 1.298 T |
| P-EIS-METL-MAG-DH2.12 | < blank > |
| P-EIS-METL-MAG-DH2.13 | < blank > |
| P-EIS-METL-MAG-DH2.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-DH2.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-DH2.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-DH2.17 | |
| P-EIS-METL-MAG-DH2.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-DH2.35 | < blank > |
| P-EIS-METL-MAG-DH2.36 | < blank > |
| P-EIS-METL-MAG-DH2.37 | < blank > |
| P-EIS-METL-MAG-DH2.38 | < blank > |
| P-EIS-METL-MAG-DH2.39 | < blank > |
| P-EIS-METL-MAG-DH2.40 | < blank > |
| P-EIS-METL-MAG-DH2.41 | < blank > |
| P-EIS-METL-MAG-DH2.42 | < blank > |
| P-EIS-METL-MAG-DH2.43 | < blank > |
| P-EIS-METL-MAG-DH2.44 | < blank > |
| P-EIS-METL-MAG-DH2.45 | < blank > |
| P-EIS-METL-MAG-DH2.46 | < blank > |
| P-EIS-METL-MAG-DH2.47 | < blank > |
| P-EIS-METL-MAG-DH2.48 | < blank > |
| P-EIS-METL-MAG-DH2.49 | < blank > |
| P-EIS-METL-MAG-DH2.50 | < blank > |
| P-EIS-METL-MAG-DH2.51 | < blank > |
| P-EIS-METL-MAG-DH2.52 | < blank > |
| P-EIS-METL-MAG-DH2.53 | < blank > |
| P-EIS-METL-MAG-DH2.54 | < blank > |
| P-EIS-METL-MAG-DH2.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-DH2.56 | < blank > |
| P-EIS-METL-MAG-DH3.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-DH3.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-DH3.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-DH3.4 | < blank > |
| P-EIS-METL-MAG-DH3.5 | < blank > |
| P-EIS-METL-MAG-DH3.06 | The magnet minimal gap shall be 32 m |
| P-EIS-METL-MAG-DH3.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-DH3.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-DH3.09 | The magnet length shall be <0.117 m |
| P-EIS-METL-MAG-DH3.10 | The magnet slot length shall be 0.117 m |
| P-EIS-METL-MAG-DH3.11 | The magnets dipole field B shall be 0.881 T |
| P-EIS-METL-MAG-DH3.12 | < blank > |
| P-EIS-METL-MAG-DH3.13 | < blank > |
| P-EIS-METL-MAG-DH3.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-DH3.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-DH3.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-DH3.17 | |
| P-EIS-METL-MAG-DH3.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-DH3.35 | < blank > |
| P-EIS-METL-MAG-DH3.36 | < blank > |
| P-EIS-METL-MAG-DH3.37 | < blank > |
| P-EIS-METL-MAG-DH3.38 | < blank > |
| P-EIS-METL-MAG-DH3.39 | < blank > |
| P-EIS-METL-MAG-DH3.40 | < blank > |
| P-EIS-METL-MAG-DH3.41 | < blank > |
| P-EIS-METL-MAG-DH3.42 | < blank > |
| P-EIS-METL-MAG-DH3.43 | < blank > |
| P-EIS-METL-MAG-DH3.44 | < blank > |
| P-EIS-METL-MAG-DH3.45 | < blank > |
| P-EIS-METL-MAG-DH3.46 | < blank > |
| P-EIS-METL-MAG-DH3.47 | < blank > |
| P-EIS-METL-MAG-DH3.48 | < blank > |
| P-EIS-METL-MAG-DH3.49 | < blank > |
| P-EIS-METL-MAG-DH3.50 | < blank > |
| P-EIS-METL-MAG-DH3.51 | < blank > |
| P-EIS-METL-MAG-DH3.52 | < blank > |
| P-EIS-METL-MAG-DH3.53 | < blank > |
| P-EIS-METL-MAG-DH3.54 | < blank > |
| P-EIS-METL-MAG-DH3.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-DH3.56 | < blank > |
| P-EIS-METL-MAG-DV1.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-DV1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-DV1.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-DV1.4 | < blank > |
| P-EIS-METL-MAG-DV1.5 | < blank > |
| P-EIS-METL-MAG-DV1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-METL-MAG-DV1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-DV1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-DV1.09 | The magnet length shall be <1 m |
| P-EIS-METL-MAG-DV1.10 | The magnet slot length shall be 1 m |
| P-EIS-METL-MAG-DV1.11 | The magnets dipole field B shall be 0.061 T |
| P-EIS-METL-MAG-DV1.12 | < blank > |
| P-EIS-METL-MAG-DV1.13 | < blank > |
| P-EIS-METL-MAG-DV1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-DV1.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-DV1.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-DV1.17 | |
| P-EIS-METL-MAG-DV1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-DV1.35 | < blank > |
| P-EIS-METL-MAG-DV1.36 | < blank > |
| P-EIS-METL-MAG-DV1.37 | < blank > |
| P-EIS-METL-MAG-DV1.38 | < blank > |
| P-EIS-METL-MAG-DV1.39 | < blank > |
| P-EIS-METL-MAG-DV1.40 | < blank > |
| P-EIS-METL-MAG-DV1.41 | < blank > |
| P-EIS-METL-MAG-DV1.42 | < blank > |
| P-EIS-METL-MAG-DV1.43 | < blank > |
| P-EIS-METL-MAG-DV1.44 | < blank > |
| P-EIS-METL-MAG-DV1.45 | < blank > |
| P-EIS-METL-MAG-DV1.46 | < blank > |
| P-EIS-METL-MAG-DV1.47 | < blank > |
| P-EIS-METL-MAG-DV1.48 | < blank > |
| P-EIS-METL-MAG-DV1.49 | < blank > |
| P-EIS-METL-MAG-DV1.50 | < blank > |
| P-EIS-METL-MAG-DV1.51 | < blank > |
| P-EIS-METL-MAG-DV1.52 | < blank > |
| P-EIS-METL-MAG-DV1.53 | < blank > |
| P-EIS-METL-MAG-DV1.54 | < blank > |
| P-EIS-METL-MAG-DV1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-DV1.56 | < blank > |
| P-EIS-METL-MAG-KH1.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-KH1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-KH1.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-KH1.4 | < blank > |
| P-EIS-METL-MAG-KH1.5 | < blank > |
| P-EIS-METL-MAG-KH1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-METL-MAG-KH1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-KH1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-KH1.09 | The magnet length shall be <0.1 m |
| P-EIS-METL-MAG-KH1.10 | The magnet slot length shall be 0.1 m |
| P-EIS-METL-MAG-KH1.11 | The magnets dipole field B shall be 0.002 T |
| P-EIS-METL-MAG-KH1.12 | < blank > |
| P-EIS-METL-MAG-KH1.13 | < blank > |
| P-EIS-METL-MAG-KH1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-KH1.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-KH1.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-KH1.17 | |
| P-EIS-METL-MAG-KH1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-KH1.35 | < blank > |
| P-EIS-METL-MAG-KH1.36 | < blank > |
| P-EIS-METL-MAG-KH1.37 | < blank > |
| P-EIS-METL-MAG-KH1.38 | < blank > |
| P-EIS-METL-MAG-KH1.39 | < blank > |
| P-EIS-METL-MAG-KH1.40 | < blank > |
| P-EIS-METL-MAG-KH1.41 | < blank > |
| P-EIS-METL-MAG-KH1.42 | < blank > |
| P-EIS-METL-MAG-KH1.43 | < blank > |
| P-EIS-METL-MAG-KH1.44 | < blank > |
| P-EIS-METL-MAG-KH1.45 | < blank > |
| P-EIS-METL-MAG-KH1.46 | < blank > |
| P-EIS-METL-MAG-KH1.47 | < blank > |
| P-EIS-METL-MAG-KH1.48 | < blank > |
| P-EIS-METL-MAG-KH1.49 | < blank > |
| P-EIS-METL-MAG-KH1.50 | < blank > |
| P-EIS-METL-MAG-KH1.51 | < blank > |
| P-EIS-METL-MAG-KH1.52 | < blank > |
| P-EIS-METL-MAG-KH1.53 | < blank > |
| P-EIS-METL-MAG-KH1.54 | < blank > |
| P-EIS-METL-MAG-KH1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-KH1.56 | < blank > |
| P-EIS-METL-MAG-KV1.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-KV1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-KV1.03 | The magnet field direction shall be H (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-KV1.4 | < blank > |
| P-EIS-METL-MAG-KV1.5 | < blank > |
| P-EIS-METL-MAG-KV1.06 | The magnet minimal gap shall be 16 m |
| P-EIS-METL-MAG-KV1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-KV1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-KV1.09 | The magnet length shall be <0.1 m |
| P-EIS-METL-MAG-KV1.10 | The magnet slot length shall be 0.1 m |
| P-EIS-METL-MAG-KV1.11 | The magnets dipole field B shall be 0.002 T |
| P-EIS-METL-MAG-KV1.12 | < blank > |
| P-EIS-METL-MAG-KV1.13 | < blank > |
| P-EIS-METL-MAG-KV1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-KV1.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-KV1.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-KV1.17 | |
| P-EIS-METL-MAG-KV1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-KV1.35 | < blank > |
| P-EIS-METL-MAG-KV1.36 | < blank > |
| P-EIS-METL-MAG-KV1.37 | < blank > |
| P-EIS-METL-MAG-KV1.38 | < blank > |
| P-EIS-METL-MAG-KV1.39 | < blank > |
| P-EIS-METL-MAG-KV1.40 | < blank > |
| P-EIS-METL-MAG-KV1.41 | < blank > |
| P-EIS-METL-MAG-KV1.42 | < blank > |
| P-EIS-METL-MAG-KV1.43 | < blank > |
| P-EIS-METL-MAG-KV1.44 | < blank > |
| P-EIS-METL-MAG-KV1.45 | < blank > |
| P-EIS-METL-MAG-KV1.46 | < blank > |
| P-EIS-METL-MAG-KV1.47 | < blank > |
| P-EIS-METL-MAG-KV1.48 | < blank > |
| P-EIS-METL-MAG-KV1.49 | < blank > |
| P-EIS-METL-MAG-KV1.50 | < blank > |
| P-EIS-METL-MAG-KV1.51 | < blank > |
| P-EIS-METL-MAG-KV1.52 | < blank > |
| P-EIS-METL-MAG-KV1.53 | < blank > |
| P-EIS-METL-MAG-KV1.54 | < blank > |
| P-EIS-METL-MAG-KV1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-KV1.56 | < blank > |
| P-EIS-METL-MAG-Q1.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-Q1.02 | The magnet field type shall be Qu (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-Q1.3 | < blank > |
| P-EIS-METL-MAG-Q1.04 | The magnet field rotation shall be No (No=norm, Sk=skew) |
| P-EIS-METL-MAG-Q1.05 | The magnet minimal coil inner radius shall be 16 m |
| P-EIS-METL-MAG-Q1.6 | < blank > |
| P-EIS-METL-MAG-Q1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-Q1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-Q1.09 | The magnet length shall be <0.1 m |
| P-EIS-METL-MAG-Q1.10 | The magnet slot length shall be 0.1 m |
| P-EIS-METL-MAG-Q1.11 | < blank > |
| P-EIS-METL-MAG-Q1.12 | The magnets gradiant field G shall be 39.784 T/m |
| P-EIS-METL-MAG-Q1.13 | < blank > |
| P-EIS-METL-MAG-Q1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-Q1.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-Q1.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-Q1.17 | |
| P-EIS-METL-MAG-Q1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-Q1.35 | < blank > |
| P-EIS-METL-MAG-Q1.36 | < blank > |
| P-EIS-METL-MAG-Q1.37 | < blank > |
| P-EIS-METL-MAG-Q1.38 | < blank > |
| P-EIS-METL-MAG-Q1.39 | < blank > |
| P-EIS-METL-MAG-Q1.40 | < blank > |
| P-EIS-METL-MAG-Q1.41 | < blank > |
| P-EIS-METL-MAG-Q1.42 | < blank > |
| P-EIS-METL-MAG-Q1.43 | < blank > |
| P-EIS-METL-MAG-Q1.44 | < blank > |
| P-EIS-METL-MAG-Q1.45 | < blank > |
| P-EIS-METL-MAG-Q1.46 | < blank > |
| P-EIS-METL-MAG-Q1.47 | < blank > |
| P-EIS-METL-MAG-Q1.48 | < blank > |
| P-EIS-METL-MAG-Q1.49 | < blank > |
| P-EIS-METL-MAG-Q1.50 | < blank > |
| P-EIS-METL-MAG-Q1.51 | < blank > |
| P-EIS-METL-MAG-Q1.52 | < blank > |
| P-EIS-METL-MAG-Q1.53 | < blank > |
| P-EIS-METL-MAG-Q1.54 | < blank > |
| P-EIS-METL-MAG-Q1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-Q1.56 | < blank > |
| P-EIS-METL-MAG-Q_BATES.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-Q_BATES.02 | The magnet field type shall be Qu (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-Q_BATES.3 | < blank > |
| P-EIS-METL-MAG-Q_BATES.04 | The magnet field rotation shall be No (No=norm, Sk=skew) |
| P-EIS-METL-MAG-Q_BATES.05 | The magnet minimal coil inner radius shall be 16 m |
| P-EIS-METL-MAG-Q_BATES.6 | < blank > |
| P-EIS-METL-MAG-Q_BATES.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-Q_BATES.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-Q_BATES.09 | The magnet length shall be <0.2794 m |
| P-EIS-METL-MAG-Q_BATES.10 | The magnet slot length shall be 0.2794 m |
| P-EIS-METL-MAG-Q_BATES.11 | < blank > |
| P-EIS-METL-MAG-Q_BATES.12 | The magnets gradiant field G shall be 26.684 T/m |
| P-EIS-METL-MAG-Q_BATES.13 | < blank > |
| P-EIS-METL-MAG-Q_BATES.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-Q_BATES.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-Q_BATES.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-Q_BATES.17 | |
| P-EIS-METL-MAG-Q_BATES.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-Q_BATES.35 | < blank > |
| P-EIS-METL-MAG-Q_BATES.36 | < blank > |
| P-EIS-METL-MAG-Q_BATES.37 | < blank > |
| P-EIS-METL-MAG-Q_BATES.38 | < blank > |
| P-EIS-METL-MAG-Q_BATES.39 | < blank > |
| P-EIS-METL-MAG-Q_BATES.40 | < blank > |
| P-EIS-METL-MAG-Q_BATES.41 | < blank > |
| P-EIS-METL-MAG-Q_BATES.42 | < blank > |
| P-EIS-METL-MAG-Q_BATES.43 | < blank > |
| P-EIS-METL-MAG-Q_BATES.44 | < blank > |
| P-EIS-METL-MAG-Q_BATES.45 | < blank > |
| P-EIS-METL-MAG-Q_BATES.46 | < blank > |
| P-EIS-METL-MAG-Q_BATES.47 | < blank > |
| P-EIS-METL-MAG-Q_BATES.48 | < blank > |
| P-EIS-METL-MAG-Q_BATES.49 | < blank > |
| P-EIS-METL-MAG-Q_BATES.50 | < blank > |
| P-EIS-METL-MAG-Q_BATES.51 | < blank > |
| P-EIS-METL-MAG-Q_BATES.52 | < blank > |
| P-EIS-METL-MAG-Q_BATES.53 | < blank > |
| P-EIS-METL-MAG-Q_BATES.54 | < blank > |
| P-EIS-METL-MAG-Q_BATES.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-Q_BATES.56 | < blank > |
| P-EIS-METL-MAG-SEPTUM.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-SEPTUM.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-SEPTUM.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-SEPTUM.4 | < blank > |
| P-EIS-METL-MAG-SEPTUM.5 | < blank > |
| P-EIS-METL-MAG-SEPTUM.06 | The magnet minimal gap shall be 32 m |
| P-EIS-METL-MAG-SEPTUM.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-SEPTUM.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-SEPTUM.09 | The magnet length shall be <0.5 m |
| P-EIS-METL-MAG-SEPTUM.10 | The magnet slot length shall be 0.5 m |
| P-EIS-METL-MAG-SEPTUM.11 | The magnets dipole field B shall be 0.896 T |
| P-EIS-METL-MAG-SEPTUM.12 | < blank > |
| P-EIS-METL-MAG-SEPTUM.13 | < blank > |
| P-EIS-METL-MAG-SEPTUM.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-SEPTUM.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-SEPTUM.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-SEPTUM.17 | |
| P-EIS-METL-MAG-SEPTUM.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-SEPTUM.35 | < blank > |
| P-EIS-METL-MAG-SEPTUM.36 | < blank > |
| P-EIS-METL-MAG-SEPTUM.37 | < blank > |
| P-EIS-METL-MAG-SEPTUM.38 | < blank > |
| P-EIS-METL-MAG-SEPTUM.39 | < blank > |
| P-EIS-METL-MAG-SEPTUM.40 | < blank > |
| P-EIS-METL-MAG-SEPTUM.41 | < blank > |
| P-EIS-METL-MAG-SEPTUM.42 | < blank > |
| P-EIS-METL-MAG-SEPTUM.43 | < blank > |
| P-EIS-METL-MAG-SEPTUM.44 | < blank > |
| P-EIS-METL-MAG-SEPTUM.45 | < blank > |
| P-EIS-METL-MAG-SEPTUM.46 | < blank > |
| P-EIS-METL-MAG-SEPTUM.47 | < blank > |
| P-EIS-METL-MAG-SEPTUM.48 | < blank > |
| P-EIS-METL-MAG-SEPTUM.49 | < blank > |
| P-EIS-METL-MAG-SEPTUM.50 | < blank > |
| P-EIS-METL-MAG-SEPTUM.51 | < blank > |
| P-EIS-METL-MAG-SEPTUM.52 | < blank > |
| P-EIS-METL-MAG-SEPTUM.53 | < blank > |
| P-EIS-METL-MAG-SEPTUM.54 | < blank > |
| P-EIS-METL-MAG-SEPTUM.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-SEPTUM.56 | < blank > |
| P-EIS-METL-MAG-SPINSOL.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-SPINSOL.02 | The magnet field type shall be So (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-SPINSOL.03 | The magnet field direction shall be Z (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-SPINSOL.4 | < blank > |
| P-EIS-METL-MAG-SPINSOL.5 | < blank > |
| P-EIS-METL-MAG-SPINSOL.6 | < blank > |
| P-EIS-METL-MAG-SPINSOL.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-SPINSOL.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-SPINSOL.09 | The magnet length shall be <0.6 m |
| P-EIS-METL-MAG-SPINSOL.10 | The magnet slot length shall be 0.6 m |
| P-EIS-METL-MAG-SPINSOL.11 | The magnets dipole field B shall be 3.667 T |
| P-EIS-METL-MAG-SPINSOL.12 | < blank > |
| P-EIS-METL-MAG-SPINSOL.13 | < blank > |
| P-EIS-METL-MAG-SPINSOL.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-SPINSOL.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-SPINSOL.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-SPINSOL.17 | |
| P-EIS-METL-MAG-SPINSOL.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-SPINSOL.35 | < blank > |
| P-EIS-METL-MAG-SPINSOL.36 | < blank > |
| P-EIS-METL-MAG-SPINSOL.37 | < blank > |
| P-EIS-METL-MAG-SPINSOL.38 | < blank > |
| P-EIS-METL-MAG-SPINSOL.39 | < blank > |
| P-EIS-METL-MAG-SPINSOL.40 | < blank > |
| P-EIS-METL-MAG-SPINSOL.41 | < blank > |
| P-EIS-METL-MAG-SPINSOL.42 | < blank > |
| P-EIS-METL-MAG-SPINSOL.43 | < blank > |
| P-EIS-METL-MAG-SPINSOL.44 | < blank > |
| P-EIS-METL-MAG-SPINSOL.45 | < blank > |
| P-EIS-METL-MAG-SPINSOL.46 | < blank > |
| P-EIS-METL-MAG-SPINSOL.47 | < blank > |
| P-EIS-METL-MAG-SPINSOL.48 | < blank > |
| P-EIS-METL-MAG-SPINSOL.49 | < blank > |
| P-EIS-METL-MAG-SPINSOL.50 | < blank > |
| P-EIS-METL-MAG-SPINSOL.51 | < blank > |
| P-EIS-METL-MAG-SPINSOL.52 | < blank > |
| P-EIS-METL-MAG-SPINSOL.53 | < blank > |
| P-EIS-METL-MAG-SPINSOL.54 | < blank > |
| P-EIS-METL-MAG-SPINSOL.55 | The magnets shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-SPINSOL.56 | < blank > |
| P-EIS-METL-PS-DH1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-DH1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-DH1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-DH1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-DH1.5 | < blank > |
| P-EIS-METL-PS-DH1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-DH1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-DH1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DH1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DH1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-DH1.11 | < blank > |
| P-EIS-METL-PS-DH1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-DH1.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-DH1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-DH1.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-DH1.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-DH1.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-DH1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-DH1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-DH1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-DH1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-DH1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-DH1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-DH1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-DH1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-DH1.26 | < blank > |
| P-EIS-METL-PS-DH1.27 | < blank > |
| P-EIS-METL-PS-DH1.28 | < blank > |
| P-EIS-METL-PS-DH1.29 | < blank > |
| P-EIS-METL-PS-DH1.30 | < blank > |
| P-EIS-METL-PS-DH1.31 | < blank > |
| P-EIS-METL-PS-DH1.32 | < blank > |
| P-EIS-METL-PS-DH1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-DH1.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-DH1.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-DH1.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-DH1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-DH1.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-DH1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-DH1.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-DH1.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-DH1.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-DH1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-DH1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-DH1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-DH1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-DH1.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-DH2.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-DH2.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-DH2.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-DH2.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-DH2.5 | < blank > |
| P-EIS-METL-PS-DH2.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-DH2.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-DH2.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DH2.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DH2.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-DH2.11 | < blank > |
| P-EIS-METL-PS-DH2.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-DH2.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-DH2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-DH2.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-DH2.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-DH2.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-DH2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-DH2.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-DH2.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-DH2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-DH2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-DH2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-DH2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-DH2.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-DH2.26 | < blank > |
| P-EIS-METL-PS-DH2.27 | < blank > |
| P-EIS-METL-PS-DH2.28 | < blank > |
| P-EIS-METL-PS-DH2.29 | < blank > |
| P-EIS-METL-PS-DH2.30 | < blank > |
| P-EIS-METL-PS-DH2.31 | < blank > |
| P-EIS-METL-PS-DH2.32 | < blank > |
| P-EIS-METL-PS-DH2.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-DH2.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-DH2.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-DH2.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-DH2.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-DH2.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-DH2.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-DH2.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-DH2.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-DH2.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-DH2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-DH2.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-DH2.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-DH2.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-DH2.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-DH3.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-DH3.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-DH3.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-DH3.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-DH3.5 | < blank > |
| P-EIS-METL-PS-DH3.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-DH3.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-DH3.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DH3.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DH3.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-DH3.11 | < blank > |
| P-EIS-METL-PS-DH3.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-DH3.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-DH3.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-DH3.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-DH3.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-DH3.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-DH3.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-DH3.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-DH3.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-DH3.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-DH3.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-DH3.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-DH3.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-DH3.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-DH3.26 | < blank > |
| P-EIS-METL-PS-DH3.27 | < blank > |
| P-EIS-METL-PS-DH3.28 | < blank > |
| P-EIS-METL-PS-DH3.29 | < blank > |
| P-EIS-METL-PS-DH3.30 | < blank > |
| P-EIS-METL-PS-DH3.31 | < blank > |
| P-EIS-METL-PS-DH3.32 | < blank > |
| P-EIS-METL-PS-DH3.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-DH3.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-DH3.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-DH3.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-DH3.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-DH3.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-DH3.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-DH3.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-DH3.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-DH3.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-DH3.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-DH3.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-DH3.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-DH3.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-DH3.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-DV1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-DV1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-DV1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-DV1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-DV1.5 | < blank > |
| P-EIS-METL-PS-DV1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-DV1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-DV1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DV1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DV1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-DV1.11 | < blank > |
| P-EIS-METL-PS-DV1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-DV1.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-DV1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-DV1.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-DV1.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-DV1.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-DV1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-DV1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-DV1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-DV1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-DV1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-DV1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-DV1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-DV1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-DV1.26 | < blank > |
| P-EIS-METL-PS-DV1.27 | < blank > |
| P-EIS-METL-PS-DV1.28 | < blank > |
| P-EIS-METL-PS-DV1.29 | < blank > |
| P-EIS-METL-PS-DV1.30 | < blank > |
| P-EIS-METL-PS-DV1.31 | < blank > |
| P-EIS-METL-PS-DV1.32 | < blank > |
| P-EIS-METL-PS-DV1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-DV1.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-DV1.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-DV1.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-DV1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-DV1.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-DV1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-DV1.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-DV1.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-DV1.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-DV1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-DV1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-DV1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-DV1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-DV1.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-KH1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-KH1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-KH1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-KH1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-KH1.5 | < blank > |
| P-EIS-METL-PS-KH1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-KH1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-KH1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-KH1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-KH1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-KH1.11 | < blank > |
| P-EIS-METL-PS-KH1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-KH1.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-KH1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-KH1.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-KH1.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-KH1.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-KH1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-KH1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-KH1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-KH1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-KH1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-KH1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-KH1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-KH1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-KH1.26 | < blank > |
| P-EIS-METL-PS-KH1.27 | < blank > |
| P-EIS-METL-PS-KH1.28 | < blank > |
| P-EIS-METL-PS-KH1.29 | < blank > |
| P-EIS-METL-PS-KH1.30 | < blank > |
| P-EIS-METL-PS-KH1.31 | < blank > |
| P-EIS-METL-PS-KH1.32 | < blank > |
| P-EIS-METL-PS-KH1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-KH1.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-KH1.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-KH1.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-KH1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-KH1.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-KH1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-KH1.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-KH1.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-KH1.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-KH1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-KH1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-KH1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-KH1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-KH1.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-KV1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-KV1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-KV1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-KV1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-KV1.5 | < blank > |
| P-EIS-METL-PS-KV1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-KV1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-KV1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-KV1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-KV1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-KV1.11 | < blank > |
| P-EIS-METL-PS-KV1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-KV1.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-KV1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-KV1.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-KV1.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-KV1.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-KV1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-KV1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-KV1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-KV1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-KV1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-KV1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-KV1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-KV1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-KV1.26 | < blank > |
| P-EIS-METL-PS-KV1.27 | < blank > |
| P-EIS-METL-PS-KV1.28 | < blank > |
| P-EIS-METL-PS-KV1.29 | < blank > |
| P-EIS-METL-PS-KV1.30 | < blank > |
| P-EIS-METL-PS-KV1.31 | < blank > |
| P-EIS-METL-PS-KV1.32 | < blank > |
| P-EIS-METL-PS-KV1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-KV1.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-KV1.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-KV1.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-KV1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-KV1.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-KV1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-KV1.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-KV1.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-KV1.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-KV1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-KV1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-KV1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-KV1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-KV1.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-Q1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-Q1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-Q1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-Q1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-Q1.5 | < blank > |
| P-EIS-METL-PS-Q1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-Q1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-Q1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-Q1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-Q1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-Q1.11 | < blank > |
| P-EIS-METL-PS-Q1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-Q1.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-Q1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-Q1.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-Q1.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-Q1.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-Q1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-Q1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-Q1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-Q1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-Q1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-Q1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-Q1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-Q1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-Q1.26 | < blank > |
| P-EIS-METL-PS-Q1.27 | < blank > |
| P-EIS-METL-PS-Q1.28 | < blank > |
| P-EIS-METL-PS-Q1.29 | < blank > |
| P-EIS-METL-PS-Q1.30 | < blank > |
| P-EIS-METL-PS-Q1.31 | < blank > |
| P-EIS-METL-PS-Q1.32 | < blank > |
| P-EIS-METL-PS-Q1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-Q1.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-Q1.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-Q1.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-Q1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-Q1.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-Q1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-Q1.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-Q1.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-Q1.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-Q1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-Q1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-Q1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-Q1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-Q1.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-Q_BATES.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-Q_BATES.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-Q_BATES.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-Q_BATES.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-Q_BATES.5 | < blank > |
| P-EIS-METL-PS-Q_BATES.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-Q_BATES.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-Q_BATES.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-Q_BATES.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-Q_BATES.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-Q_BATES.11 | < blank > |
| P-EIS-METL-PS-Q_BATES.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-Q_BATES.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-Q_BATES.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-Q_BATES.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-Q_BATES.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-Q_BATES.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-Q_BATES.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-Q_BATES.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-Q_BATES.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-Q_BATES.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-Q_BATES.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-Q_BATES.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-Q_BATES.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-Q_BATES.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-Q_BATES.26 | < blank > |
| P-EIS-METL-PS-Q_BATES.27 | < blank > |
| P-EIS-METL-PS-Q_BATES.28 | < blank > |
| P-EIS-METL-PS-Q_BATES.29 | < blank > |
| P-EIS-METL-PS-Q_BATES.30 | < blank > |
| P-EIS-METL-PS-Q_BATES.31 | < blank > |
| P-EIS-METL-PS-Q_BATES.32 | < blank > |
| P-EIS-METL-PS-Q_BATES.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-Q_BATES.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-Q_BATES.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-Q_BATES.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-Q_BATES.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-Q_BATES.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-Q_BATES.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-Q_BATES.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-Q_BATES.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-Q_BATES.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-Q_BATES.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-Q_BATES.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-Q_BATES.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-Q_BATES.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-Q_BATES.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-SEPTUM.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-SEPTUM.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-SEPTUM.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-SEPTUM.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-SEPTUM.5 | < blank > |
| P-EIS-METL-PS-SEPTUM.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-SEPTUM.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-SEPTUM.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-SEPTUM.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-SEPTUM.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-SEPTUM.11 | < blank > |
| P-EIS-METL-PS-SEPTUM.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-SEPTUM.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-SEPTUM.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-SEPTUM.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-SEPTUM.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-SEPTUM.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-SEPTUM.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-SEPTUM.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-SEPTUM.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-SEPTUM.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-SEPTUM.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-SEPTUM.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-SEPTUM.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-SEPTUM.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-SEPTUM.26 | < blank > |
| P-EIS-METL-PS-SEPTUM.27 | < blank > |
| P-EIS-METL-PS-SEPTUM.28 | < blank > |
| P-EIS-METL-PS-SEPTUM.29 | < blank > |
| P-EIS-METL-PS-SEPTUM.30 | < blank > |
| P-EIS-METL-PS-SEPTUM.31 | < blank > |
| P-EIS-METL-PS-SEPTUM.32 | < blank > |
| P-EIS-METL-PS-SEPTUM.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-SEPTUM.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-SEPTUM.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-SEPTUM.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-SEPTUM.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-SEPTUM.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-SEPTUM.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-SEPTUM.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-SEPTUM.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-SEPTUM.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-SEPTUM.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-SEPTUM.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-SEPTUM.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-SEPTUM.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-SEPTUM.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-SPINSOL.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-SPINSOL.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-SPINSOL.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-SPINSOL.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-SPINSOL.5 | < blank > |
| P-EIS-METL-PS-SPINSOL.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-SPINSOL.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-SPINSOL.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-SPINSOL.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-SPINSOL.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-SPINSOL.11 | < blank > |
| P-EIS-METL-PS-SPINSOL.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-SPINSOL.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-SPINSOL.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-SPINSOL.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-SPINSOL.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-SPINSOL.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-SPINSOL.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-SPINSOL.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-SPINSOL.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-SPINSOL.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-SPINSOL.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-SPINSOL.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-SPINSOL.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-SPINSOL.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-SPINSOL.26 | < blank > |
| P-EIS-METL-PS-SPINSOL.27 | < blank > |
| P-EIS-METL-PS-SPINSOL.28 | < blank > |
| P-EIS-METL-PS-SPINSOL.29 | < blank > |
| P-EIS-METL-PS-SPINSOL.30 | < blank > |
| P-EIS-METL-PS-SPINSOL.31 | < blank > |
| P-EIS-METL-PS-SPINSOL.32 | < blank > |
| P-EIS-METL-PS-SPINSOL.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-SPINSOL.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-SPINSOL.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-SPINSOL.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-SPINSOL.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-SPINSOL.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-SPINSOL.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-SPINSOL.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-SPINSOL.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-SPINSOL.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-SPINSOL.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-SPINSOL.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-SPINSOL.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-SPINSOL.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-SPINSOL.47 | The magnet polarity connections shall be TBD |
| P-EIS-RCS-MAG-C0.21.11 | -10<b11<10 , -10<a11<10 (10^-4) |
| P-EIS-RCS-MAG-C0.21.12 | b12 -10<b12<10 , -10<a12<10 (10^-4) |
| P-EIS-RCS-MAG-C0.21.13 | b13 -10<b13<10 , -10<a13<10 (10^-4) |
| P-EIS-RCS-MAG-C0.21.14 | b14 -10<b14<10 , -10<a14<10 (10^-4) |
| P-EIS-RCS-MAG-C0.21.15 | b15 -10<b15<10 , -10<a15<10 (10^-4) |
| P-EIS-RCS-MAG-C0.21.16 | b16 -10<b16<10 , -10<a16<10 (10^-4) |
| P-EIS-RCS-MAG-D0.01 | The magnet shall have a single function. |
| P-EIS-RCS-MAG-D0.05 | The magnet shall have a Dipole field. |
| P-EIS-RCS-MAG-D0.06 | The magnet field shall have a vertical field direction. |
| P-EIS-RCS-MAG-D0.09 | The minimum magnet bore gap shall be 40 (mm). |
| P-EIS-RCS-MAG-D0.12 | The magnet physical length of the magnet shall be <1.77 (m) |
| P-EIS-RCS-MAG-D0.15 | The magnet integrated dipole field (min/max) B shall be 0.081\0.49 (Tm). |
| P-EIS-RCS-MAG-D0.15.1 | For the magnet at 3GeV Injection the integrated dipole field B shall be 0.08256 na.m |
| P-EIS-RCS-MAG-D0.15.2 | For the magnet at 18GeV Extraction the integrated dipole field B shall be 0.4896 na.m |
| P-EIS-RCS-MAG-D0.17 | The magnet field ramp rate shall be 2.55 (T/s). |
| P-EIS-RCS-MAG-D0.18 | The magnet to magnet field variability between magnets shall be < 0.1 %. |
| P-EIS-RCS-MAG-D0.19 | The harmonic reference radius for all energy levels (3, 5, 10, and 18 Gev) shall be 15 (mm) centered at (0,0) with respect to the magnetic axis. |
| P-EIS-RCS-MAG-D0.20 | The field at the reference radius shall be: 0.046 (T) at 3 Gev TBD (T) at 5 Gev TBD (T) at 10 GeV 0.277 (T) at 18 Gev |
| P-EIS-RCS-MAG-D0.21 | At the magnet the bore field shall have the following multipole content (units in 10^-4): |
| P-EIS-RCS-MAG-D0.21.1 | b1 = 10000 , a1 = 0 |
| P-EIS-RCS-MAG-D0.21.2 | -2.3 < b2 < 2.3 , -0.1 < a2 < 0.1 |
| P-EIS-RCS-MAG-D0.21.4 | -0.1 < b4 < 0.1 , 0 < a4 < 0.2 |
| P-EIS-RCS-MAG-D0.21.5 | 0.4 < b5 < 3 , 0 < a5 < 0.2 |
| P-EIS-RCS-MAG-D0.21.6 | -0.1 < b6 < 0.1 , 0 < a6 < 0.2 |
| P-EIS-RCS-MAG-D0.21.7 | -2 < b7 < 2 , 0 < a7 < 0.2 |
| P-EIS-RCS-MAG-D0.21.8 | -1 < b8 < 1 , 0 < a8 < 0.2 |
| P-EIS-RCS-MAG-D0.21.9 | -1 < b9 < 0 , 0.9 < a9 < 1.1 |
| P-EIS-RCS-MAG-D0.21.11 | 0 < b11 < 2 , 0.9 < a11 < 1.1 |
| P-EIS-RCS-MAG-D0.22 | The magnet shall be designed to limit CrossTalk requirements. |
| P-EIS-RCS-MAG-D0.23 | The magnet xtalk shall be constrained as described ; The dipoles shall be designed such that the crosstalk between successive dipoles in the ring is low eNugh to prevent the field from the adjacent dipoles having a significant effect on the beam. The residual crosstalk will need to be approved by beam physics. |
| P-EIS-RCS-MAG-D0.27 | The magnet has no specific constraints for external fringe field. |
| P-EIS-RCS-MAG-D0.29 | Magnetic field position and alignment within the magnet, TBG |
| P-EIS-RCS-MAG-D0.30 | The magnet shall be designed to fit within the following envelope. TBD |
| P-EIS-RCS-MAG-D0.31 | Magnet installation tolerances, TBD |
| P-EIS-RCS-MAG-D0.32 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation. |
| P-EIS-RCS-MAG-D0.46 | The magnet design and verification process shall ensure the final magnet will meet the reliability needs of the EIC over it planned operational life of 20 years. |
| P-EIS-RCS-MAG-D0.47 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of 20 years. |
| P-EIS-RCS-MAG-Q0.01 | The magnet shall have two functions. A magnet and a magnet |
| P-EIS-RCS-MAG-Q0.02 | The magnet function shall require trim coils capable of trimming the field of the magnet by +\- 0.05 (%) |
| P-EIS-RCS-MAG-Q0.03 | The magnet function shall require current taps for operation TBD (y/n) |
| P-EIS-RCS-MAG-Q0.04 | The magnet function shall require shunt(s) for operation TBD |
| P-EIS-RCS-MAG-Q0.05.01 | The main quadrupole shall have a Quadrupole field. |
| P-EIS-RCS-MAG-Q0.05.02 | The trim quadrupole shall have a Quadrupole field. |
| P-EIS-RCS-MAG-Q0.6 | < blank > |
| P-EIS-RCS-MAG-Q0.07 | The magnet shall have a normal field rotation. |
| P-EIS-RCS-MAG-Q0.9 | < blank > |
| P-EIS-RCS-MAG-Q0.10 | The magnet good field aperture dAx required shall be 15 (mm) |
| P-EIS-RCS-MAG-Q0.11 | The magnet good field aperture dAy required shall be 5 (mm) |
| P-EIS-RCS-MAG-Q0.12 | The magnet physical length of the magnet shall be <0.6 (m) |
| P-EIS-RCS-MAG-Q0.13 | The magnet model length shall be 0.6 (m) |
| P-EIS-RCS-MAG-Q0.14 | < blank > |
| P-EIS-RCS-MAG-Q0.15.1 | < blank > |
| P-EIS-RCS-MAG-Q0.15.2 | < blank > |
| P-EIS-RCS-MAG-Q0.16.1.1 | For the main quadrupole at 3GeV Injection the Integrated grad field G shall be 2.58 T/m.m |
| P-EIS-RCS-MAG-Q0.16.2.1 | For the trim quadrupole at 3GeV Injection the Integrated grad field G shall be 0.129 T/m.m |
| P-EIS-RCS-MAG-Q0.16.2.2 | For the trim quadrupole at 18GeV Extraction the Integrated grad field G shall be 0.765 T/m.m |
| P-EIS-RCS-MAG-Q0.17 | For the magnet at 3GeV Injection the peak ramp rate shall be 0.25 (T/m.s) |
| P-EIS-RCS-MAG-Q0.18 | For the magnet at 3GeV Injection the magnet-to-magnet field variability shall be < 0.001 (%) |
| P-EIS-RCS-MAG-Q0.19 | For magnet at 3GeV Injection the harmonic reference radius at the design energy of 18 GeV shall be 15 (mm) |
| P-EIS-RCS-MAG-Q0.20 | For magnet at 3GeV Injection the Field at the reference radius and design energy of 18 GeV shall be 4.3(T.m) |
| P-EIS-RCS-MAG-Q0.21 | At 3GeV Injection the magnet the bore field shall have the following multipole content: |
| P-EIS-RCS-MAG-Q0.21.1 | < blank > |
| P-EIS-RCS-MAG-Q0.21.2 | b2=10000 , a2=0 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.4 | -2<b4<2 , -0.1<a4<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.5 | -10<b5<10 , -0.1<a5<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.6 | 0.4<b6<2.4 , -0.1<a6<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.7 | -10<b7<10 , -0.1<a7<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.8 | -1<b8<1 , -0.1<a8<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.9 | -10<b9<10 , -0.1<a9<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.11 | -10<b11<10 , -0.1<a11<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.12 | b12 -2<b12<2 , -0.1<a12<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.13 | b13 -10<b13<10 , -0.1<a13<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.14 | b14 -7.1<b14<10.9 , -0.1<a14<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.15 | b15 -10<b15<10 , -0.1<a15<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.16 | b16 -10<b16<10 , -0.1<a16<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.34 | < blank > |
| P-EIS-RCS-MAG-Q0.35 | The grad field G shall be T/m(n-1) |
| P-EIS-RCS-MAG-Q0.36 | The ramp rate shall be T/s |
| P-EIS-RCS-MAG-Q0.37 | The field stability shall be T/s |
| P-EIS-RCS-MAG-Q0.38 | The harmonic reference Radius and current shall be (mm,A) |
| P-EIS-RCS-MAG-Q0.39 | The Field at the reference radius and current shall be (T) |
| P-EIS-RCS-MAG-Q0.40 | < blank > |
| P-EIS-RCS-MAG-Q0.41 | The Bore multipole content shall have a 1st order of - (10^-4) |
| P-EIS-RCS-MAG-Q0.42 | The Bore multipole content shall have a 2nd order of b2=10000 , a2=0 (10^-4) |
| P-EIS-RCS-MAG-Q0.43 | The Bore multipole content shall have a 3rd order of -7<b3<7 , 0<a3<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.44 | The Bore multipole content shall have a 4th order of -2<b4<2 , 0<a4<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.45 | The Bore multipole content shall have a 5th order of -10<b5<10 , 0<a5<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.46 | The Bore multipole content shall have a 6th order of 0.4<b6<2.4 , 0<a6<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.47 | The Bore multipole content shall have a 7th order of -10<b7<10 , 0<a7<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.48 | The Bore multipole content shall have a 8th order of -1<b8<1 , 0<a8<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.49 | The Bore multipole content shall have a 9th order of -10<b9<10 , 0<a9<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.50 | The Bore multipole content shall have a 10th order of -1.3<b10<4.7 , 0<a10<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.51 | The Bore multipole content shall have a 11th order of -10<b11<10 , 0<a11<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.52 | The Bore multipole content shall have a 12th order of -2<b12<2 , 0<a12<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.53 | The Bore multipole content shall have a 13th order of -10<b13<10 , 0<a13<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.54 | The Bore multipole content shall have a 14th order of -7.1<b14<10.9 , 0<a14<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.55 | The Bore multipole content shall have a 15th order of -10<b15<10 , 0<a15<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.56 | The Bore multipole content shall have a 16th order of -10<b16<10 , 0<a16<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.01 | The number of magnet functions shall be 1 |
| P-EIS-RCS-MAG-Q0_6.02 | The field type shall be Qu (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-RCS-MAG-Q0_6.3 | < blank > |
| P-EIS-RCS-MAG-Q0_6.04 | The field rotation shall be No (No=norm, Sk=skew) |
| P-EIS-RCS-MAG-Q0_6.05 | The min coil inner rad shall be 16 m |
| P-EIS-RCS-MAG-Q0_6.6 | < blank > |
| P-EIS-RCS-MAG-Q0_6.07 | The good field aperture drx required shall be 20.25 m |
| P-EIS-RCS-MAG-Q0_6.08 | The good field aperture dry required shall be 7.61 m |
| P-EIS-RCS-MAG-Q0_6.09 | The mag length shall be <0.6 m |
| P-EIS-RCS-MAG-Q0_6.10 | The eff Length shall be 0.6 m |
| P-EIS-RCS-MAG-Q0_6.11 | < blank > |
| P-EIS-RCS-MAG-Q0_6.12 | < blank > |
| P-EIS-RCS-MAG-Q0_6.13 | The ramp rate shall be 2.2 T/s |
| P-EIS-RCS-MAG-Q0_6.14 | The field stability shall be *1000 T/s |
| P-EIS-RCS-MAG-Q0_6.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-RCS-MAG-Q0_6.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-RCS-MAG-Q0_6.17 | < blank > |
| P-EIS-RCS-MAG-Q0_6.18 | The Bore multipole content shall have a 1st order of - (10^-4) |
| P-EIS-RCS-MAG-Q0_6.19 | The Bore multipole content shall have a 2nd order of b2=10000 , a2=0 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.20 | The Bore multipole content shall have a 3rd order of -7<b3<7 , 0<a3<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.21 | The Bore multipole content shall have a 4th order of -2<b4<2 , 0<a4<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.22 | The Bore multipole content shall have a 5th order of -10<b5<10 , 0<a5<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.23 | The Bore multipole content shall have a 6th order of 0.4<b6<2.4 , 0<a6<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.24 | The Bore multipole content shall have a 7th order of -10<b7<10 , 0<a7<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.25 | The Bore multipole content shall have a 8th order of -1<b8<1 , 0<a8<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.26 | The Bore multipole content shall have a 9th order of -10<b9<10 , 0<a9<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.27 | The Bore multipole content shall have a 10th order of -1.3<b10<4.7 , 0<a10<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.28 | The Bore multipole content shall have a 11th order of -10<b11<10 , 0<a11<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.29 | The Bore multipole content shall have a 12th order of -2<b12<2 , 0<a12<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.30 | The Bore multipole content shall have a 13th order of -10<b13<10 , 0<a13<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.31 | The Bore multipole content shall have a 14th order of -7.1<b14<10.9 , 0<a14<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.32 | The Bore multipole content shall have a 15th order of -10<b15<10 , 0<a15<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.33 | The Bore multipole content shall have a 16th order of -10<b16<10 , 0<a16<0.2 (10^-4) |
| P-EIS-RCS-MAG-S0.21.11 | -10<b11<10 , 0<a11<0.2 (10^-4) |
| P-EIS-RCS-MAG-S0.21.12 | b12 -10<b12<10 , 0<a12<0.2 (10^-4) |
| P-EIS-RCS-MAG-S0.21.13 | b13 -10<b13<10 , 0<a13<0.2 (10^-4) |
| P-EIS-RCS-MAG-S0.21.14 | b14 -10<b14<10 , 0<a14<0.2 (10^-4) |
| P-EIS-RCS-MAG-S0.21.15 | b15 -10<b15<10 , 0<a15<0.2 (10^-4) |
| P-EIS-RCS-MAG-S0.21.16 | b16 -10<b16<10 , 0<a16<0.2 (10^-4) |
| P-EIS-RCS-PS-C0.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-RCS-PS-C0.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-RCS-PS-C0.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-RCS-PS-C0.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-RCS-PS-C0.5 | < blank > |
| P-EIS-RCS-PS-C0.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-RCS-PS-C0.07 | The nominal current of the magnets being powered shall be 12.713724 A |
| P-EIS-RCS-PS-C0.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-C0.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-C0.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-RCS-PS-C0.11 | < blank > |
| P-EIS-RCS-PS-C0.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-RCS-PS-C0.13 | The full power bandwidth required shall be TBD |
| P-EIS-RCS-PS-C0.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-RCS-PS-C0.15 | The time period for specified stability shall be TBD s |
| P-EIS-RCS-PS-C0.16 | The short term stability shall be TBD A/s |
| P-EIS-RCS-PS-C0.17 | The long term stability shall be TBD A/s |
| P-EIS-RCS-PS-C0.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-RCS-PS-C0.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-RCS-PS-C0.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-RCS-PS-C0.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-RCS-PS-C0.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-RCS-PS-C0.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-RCS-PS-C0.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-RCS-PS-C0.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-RCS-PS-C0.26 | The voltage tap configuration shall be TBD |
| P-EIS-RCS-PS-C0.27 | The threshold levels shall be TBD V |
| P-EIS-RCS-PS-C0.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-EIS-RCS-PS-C0.29 | The design shall have quench heaters TBD Y/N |
| P-EIS-RCS-PS-C0.30 | The quench heater power rating shall be TBD W |
| P-EIS-RCS-PS-C0.31 | The design shall have warm up heaters TBD Y/N |
| P-EIS-RCS-PS-C0.32 | The warmup heater power rating shall be TBD W |
| P-EIS-RCS-PS-C0.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-RCS-PS-C0.34 | The magnet turns ratio shall be TBD |
| P-EIS-RCS-PS-C0.35 | The terminal voltage shall be TBD V |
| P-EIS-RCS-PS-C0.36 | The design shall have thermal switches TBD |
| P-EIS-RCS-PS-C0.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-RCS-PS-C0.38 | The design shall have water flow switches TBD |
| P-EIS-RCS-PS-C0.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-RCS-PS-C0.40 | The design shall have access controls interlocks TBD |
| P-EIS-RCS-PS-C0.41 | The main terminals lug details shall be TBD |
| P-EIS-RCS-PS-C0.42 | The lead end indications shall be TBD |
| P-EIS-RCS-PS-C0.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-RCS-PS-C0.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-RCS-PS-C0.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-RCS-PS-C0.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-RCS-PS-C0.47 | The magnet polarity connections shall be TBD |
| P-EIS-RCS-PS-D0.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-RCS-PS-D0.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-RCS-PS-D0.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-RCS-PS-D0.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-RCS-PS-D0.5 | < blank > |
| P-EIS-RCS-PS-D0.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-RCS-PS-D0.07 | The nominal current of the magnets being powered shall be 2111.2 A |
| P-EIS-RCS-PS-D0.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-D0.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-D0.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-RCS-PS-D0.11 | < blank > |
| P-EIS-RCS-PS-D0.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-RCS-PS-D0.13 | The full power bandwidth required shall be TBD |
| P-EIS-RCS-PS-D0.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-RCS-PS-D0.15 | The time period for specified stability shall be TBD s |
| P-EIS-RCS-PS-D0.16 | The short term stability shall be TBD A/s |
| P-EIS-RCS-PS-D0.17 | The long term stability shall be TBD A/s |
| P-EIS-RCS-PS-D0.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-RCS-PS-D0.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-RCS-PS-D0.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-RCS-PS-D0.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-RCS-PS-D0.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-RCS-PS-D0.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-RCS-PS-D0.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-RCS-PS-D0.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-RCS-PS-D0.26 | The voltage tap configuration shall be TBD |
| P-EIS-RCS-PS-D0.27 | The threshold levels shall be TBD V |
| P-EIS-RCS-PS-D0.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-EIS-RCS-PS-D0.29 | The design shall have quench heaters TBD Y/N |
| P-EIS-RCS-PS-D0.30 | The quench heater power rating shall be TBD W |
| P-EIS-RCS-PS-D0.31 | The design shall have warm up heaters TBD Y/N |
| P-EIS-RCS-PS-D0.32 | The warmup heater power rating shall be TBD W |
| P-EIS-RCS-PS-D0.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-RCS-PS-D0.34 | The magnet turns ratio shall be TBD |
| P-EIS-RCS-PS-D0.35 | The terminal voltage shall be TBD V |
| P-EIS-RCS-PS-D0.36 | The design shall have thermal switches TBD |
| P-EIS-RCS-PS-D0.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-RCS-PS-D0.38 | The design shall have water flow switches TBD |
| P-EIS-RCS-PS-D0.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-RCS-PS-D0.40 | The design shall have access controls interlocks TBD |
| P-EIS-RCS-PS-D0.41 | The main terminals lug details shall be TBD |
| P-EIS-RCS-PS-D0.42 | The lead end indications shall be TBD |
| P-EIS-RCS-PS-D0.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-RCS-PS-D0.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-RCS-PS-D0.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-RCS-PS-D0.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-RCS-PS-D0.47 | The magnet polarity connections shall be TBD |
| P-EIS-RCS-PS-Q0_6.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-RCS-PS-Q0_6.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-RCS-PS-Q0_6.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-RCS-PS-Q0_6.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-RCS-PS-Q0_6.5 | < blank > |
| P-EIS-RCS-PS-Q0_6.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-RCS-PS-Q0_6.07 | The nominal current of the magnets being powered shall be 1095.9 A |
| P-EIS-RCS-PS-Q0_6.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-Q0_6.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-Q0_6.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-RCS-PS-Q0_6.11 | < blank > |
| P-EIS-RCS-PS-Q0_6.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-RCS-PS-Q0_6.13 | The full power bandwidth required shall be TBD |
| P-EIS-RCS-PS-Q0_6.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-RCS-PS-Q0_6.15 | The time period for specified stability shall be TBD s |
| P-EIS-RCS-PS-Q0_6.16 | The short term stability shall be TBD A/s |
| P-EIS-RCS-PS-Q0_6.17 | The long term stability shall be TBD A/s |
| P-EIS-RCS-PS-Q0_6.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-RCS-PS-Q0_6.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-RCS-PS-Q0_6.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-RCS-PS-Q0_6.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-RCS-PS-Q0_6.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-RCS-PS-Q0_6.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-RCS-PS-Q0_6.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-RCS-PS-Q0_6.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-RCS-PS-Q0_6.26 | The voltage tap configuration shall be N/A |
| P-EIS-RCS-PS-Q0_6.27 | The threshold levels shall be N/A V |
| P-EIS-RCS-PS-Q0_6.28 | The peak di/dt without inducing a quench shall be N/A A/S |
| P-EIS-RCS-PS-Q0_6.29 | The design shall have quench heaters N/A Y/N |
| P-EIS-RCS-PS-Q0_6.30 | The quench heater power rating shall be N/A W |
| P-EIS-RCS-PS-Q0_6.31 | The design shall have warm up heaters N/A Y/N |
| P-EIS-RCS-PS-Q0_6.32 | The warmup heater power rating shall be N/A W |
| P-EIS-RCS-PS-Q0_6.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-RCS-PS-Q0_6.34 | The magnet turns ratio shall be TBD |
| P-EIS-RCS-PS-Q0_6.35 | The terminal voltage shall be TBD V |
| P-EIS-RCS-PS-Q0_6.36 | The design shall have thermal switches TBD |
| P-EIS-RCS-PS-Q0_6.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-RCS-PS-Q0_6.38 | The design shall have water flow switches TBD |
| P-EIS-RCS-PS-Q0_6.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-RCS-PS-Q0_6.40 | The design shall have access controls interlocks TBD |
| P-EIS-RCS-PS-Q0_6.41 | The main terminals lug details shall be TBD |
| P-EIS-RCS-PS-Q0_6.42 | The lead end indications shall be TBD |
| P-EIS-RCS-PS-Q0_6.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-RCS-PS-Q0_6.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-RCS-PS-Q0_6.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-RCS-PS-Q0_6.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-RCS-PS-Q0_6.47 | The magnet polarity connections shall be TBD |
| P-EIS-RCS-PS-SXT.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-RCS-PS-SXT.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-RCS-PS-SXT.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-RCS-PS-SXT.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-RCS-PS-SXT.5 | < blank > |
| P-EIS-RCS-PS-SXT.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-RCS-PS-SXT.07 | The nominal current of the magnets being powered shall be 580 A |
| P-EIS-RCS-PS-SXT.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-SXT.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-SXT.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-RCS-PS-SXT.11 | < blank > |
| P-EIS-RCS-PS-SXT.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-RCS-PS-SXT.13 | The full power bandwidth required shall be TBD |
| P-EIS-RCS-PS-SXT.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-RCS-PS-SXT.15 | The time period for specified stability shall be TBD s |
| P-EIS-RCS-PS-SXT.16 | The short term stability shall be TBD A/s |
| P-EIS-RCS-PS-SXT.17 | The long term stability shall be TBD A/s |
| P-EIS-RCS-PS-SXT.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-RCS-PS-SXT.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-RCS-PS-SXT.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-RCS-PS-SXT.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-RCS-PS-SXT.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-RCS-PS-SXT.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-RCS-PS-SXT.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-RCS-PS-SXT.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-RCS-PS-SXT.26 | The voltage tap configuration shall be TBD |
| P-EIS-RCS-PS-SXT.27 | The threshold levels shall be TBD V |
| P-EIS-RCS-PS-SXT.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-EIS-RCS-PS-SXT.29 | The design shall have quench heaters TBD Y/N |
| P-EIS-RCS-PS-SXT.30 | The quench heater power rating shall be TBD W |
| P-EIS-RCS-PS-SXT.31 | The design shall have warm up heaters TBD Y/N |
| P-EIS-RCS-PS-SXT.32 | The warmup heater power rating shall be TBD W |
| P-EIS-RCS-PS-SXT.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-RCS-PS-SXT.34 | The magnet turns ratio shall be TBD |
| P-EIS-RCS-PS-SXT.35 | The terminal voltage shall be TBD V |
| P-EIS-RCS-PS-SXT.36 | The design shall have thermal switches TBD |
| P-EIS-RCS-PS-SXT.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-RCS-PS-SXT.38 | The design shall have water flow switches TBD |
| P-EIS-RCS-PS-SXT.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-RCS-PS-SXT.40 | The design shall have access controls interlocks TBD |
| P-EIS-RCS-PS-SXT.41 | The main terminals lug details shall be TBD |
| P-EIS-RCS-PS-SXT.42 | The lead end indications shall be TBD |
| P-EIS-RCS-PS-SXT.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-RCS-PS-SXT.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-RCS-PS-SXT.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-RCS-PS-SXT.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-RCS-PS-SXT.47 | The magnet polarity connections shall be TBD |
| P-HSR-MAG-D5I.03 | The magnet is a Dipole(D5I) RHIC Magnet, the multipole homogeneity measurements and transfer function are maintained in the BNL magnet repository. |
| P-HSR-MAG-D5I.04 | The magnet is a Dipole(D5I) RHIC Magnet, the Magnet-Cross-talk calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D5I.05 | The magnet is a Dipole(D5I) RHIC Magnet, the Magnet-Fringe-field calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D5I.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-D5I.07 | The magnet shall have an appropriate Magnet-Quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a Magnet-Quench event and meets the following constraints: |
| P-HSR-MAG-D5I.08 | All Magnet-Electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-D5I.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 Magnet-Quenches and 20000 power cycles. |
| P-HSR-MAG-D5I.10 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of >20 Years. |
| P-HSR-MAG-D5O.03 | The magnet is a Dipole(D5O) RHIC Magnet, the multipole homogeneity measurements and transfer function are maintained in the BNL magnet repository. |
| P-HSR-MAG-D5O.04 | The magnet is a Dipole(D5O) RHIC Magnet, the Magnet-Cross-talk calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D5O.05 | The magnet is a Dipole(D5O) RHIC Magnet, the Magnet-Fringe-field calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D5O.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-D5O.07 | The magnet shall have an appropriate Magnet-Quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a Magnet-Quench event and meets the following constraints: |
| P-HSR-MAG-D5O.08 | All Magnet-Electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-D5O.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 Magnet-Quenches and 20000 power cycles. |
| P-HSR-MAG-D5O.10 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of >20 Years. |
| P-HSR-MAG-D6.03 | The magnet is a Dipole(D6) RHIC Magnet, the multipole homogeneity measurements and transfer function are maintained in the BNL magnet repository. |
| P-HSR-MAG-D6.04 | The magnet is a Dipole(D6) RHIC Magnet, the Magnet-Cross-talk calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D6.05 | The magnet is a Dipole(D6) RHIC Magnet, the Magnet-Fringe-field calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D6.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-D6.07 | The magnet shall have an appropriate Magnet-Quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a Magnet-Quench event and meets the following constraints: |
| P-HSR-MAG-D6.08 | All Magnet-Electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-D6.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 Magnet-Quenches and 20000 power cycles. |
| P-HSR-MAG-D6.10 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of >20 Years. |
| P-HSR-MAG-D8.03 | The magnet is a Dipole(D8) RHIC Magnet, the multipole homogeneity measurements and transfer function are maintained in the BNL magnet repository. |
| P-HSR-MAG-D8.04 | The magnet is a Dipole(D8) RHIC Magnet, the Magnet-Cross-talk calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D8.05 | The magnet is a Dipole(D8) RHIC Magnet, the Magnet-Fringe-field calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D8.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-D8.07 | The magnet shall have an appropriate Magnet-Quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a Magnet-Quench event and meets the following constraints: |
| P-HSR-MAG-D8.08 | All Magnet-Electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-D8.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 Magnet-Quenches and 20000 power cycles. |
| P-HSR-MAG-D8.10 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of >20 Years. |
| P-HSR-MAG-D9.03 | The magnet is a Dipole(D9) RHIC Magnet, the multipole homogeneity measurements and transfer function are maintained in the BNL magnet repository. |
| P-HSR-MAG-D9.04 | The magnet is a Dipole(D9) RHIC Magnet, the Magnet-Cross-talk calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D9.05 | The magnet is a Dipole(D9) RHIC Magnet, the Magnet-Fringe-field calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D9.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-D9.07 | The magnet shall have an appropriate Magnet-Quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a Magnet-Quench event and meets the following constraints: |
| P-HSR-MAG-D9.08 | All Magnet-Electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-D9.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 Magnet-Quenches and 20000 power cycles. |
| P-HSR-MAG-D9.10 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of >20 Years. |
This function not yet implemented.