Requirement Details
Electron Ion Collider
F-EIS-RCS-MAG.4
Requirement details, history, relationships and interfaces associated with requirement F-EIS-RCS-MAG.4
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 01/27/2025 16:43 | |||
| Identifier: | F-EIS-RCS-MAG.4 | WBS: | 6.03.02 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | The EIC RCS lattice arc magnet structure shall contain an array of regular FODO cells to bend the beam and to control the beam optics. | ||
| Comments: | |||
No archive versions
| Parents | |
| No parents. | |
| Children | |
| P-EIS-HETL-MAG-D1.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-D1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-D1.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-D1.4 | < blank > |
| P-EIS-HETL-MAG-D1.5 | < blank > |
| P-EIS-HETL-MAG-D1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-D1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-D1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-D1.09 | The magnet length shall be <1 m |
| P-EIS-HETL-MAG-D1.10 | The magnet slot length shall be 1 m |
| P-EIS-HETL-MAG-D1.11 | The magnets dipole field B shall be 1.512 T |
| P-EIS-HETL-MAG-D1.12 | < blank > |
| P-EIS-HETL-MAG-D1.13 | < blank > |
| P-EIS-HETL-MAG-D1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-D1.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-D1.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-D1.17 | < blank > |
| P-EIS-HETL-MAG-D1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-D1.35 | < blank > |
| P-EIS-HETL-MAG-D1.36 | < blank > |
| P-EIS-HETL-MAG-D1.37 | < blank > |
| P-EIS-HETL-MAG-D1.38 | < blank > |
| P-EIS-HETL-MAG-D1.39 | < blank > |
| P-EIS-HETL-MAG-D1.40 | < blank > |
| P-EIS-HETL-MAG-D1.41 | < blank > |
| P-EIS-HETL-MAG-D1.42 | < blank > |
| P-EIS-HETL-MAG-D1.43 | < blank > |
| P-EIS-HETL-MAG-D1.44 | < blank > |
| P-EIS-HETL-MAG-D1.45 | < blank > |
| P-EIS-HETL-MAG-D1.46 | < blank > |
| P-EIS-HETL-MAG-D1.47 | < blank > |
| P-EIS-HETL-MAG-D1.48 | < blank > |
| P-EIS-HETL-MAG-D1.49 | < blank > |
| P-EIS-HETL-MAG-D1.50 | < blank > |
| P-EIS-HETL-MAG-D1.51 | < blank > |
| P-EIS-HETL-MAG-D1.52 | < blank > |
| P-EIS-HETL-MAG-D1.53 | < blank > |
| P-EIS-HETL-MAG-D1.54 | < blank > |
| P-EIS-HETL-MAG-D1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-D1.56 | < blank > |
| P-EIS-HETL-MAG-D2.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-D2.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-D2.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-D2.4 | < blank > |
| P-EIS-HETL-MAG-D2.5 | < blank > |
| P-EIS-HETL-MAG-D2.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-D2.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-D2.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-D2.09 | The magnet length shall be <2.99 m |
| P-EIS-HETL-MAG-D2.10 | The magnet slot length shall be 2.99 m |
| P-EIS-HETL-MAG-D2.11 | The magnets dipole field B shall be 0.193 T |
| P-EIS-HETL-MAG-D2.12 | < blank > |
| P-EIS-HETL-MAG-D2.13 | < blank > |
| P-EIS-HETL-MAG-D2.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-D2.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-D2.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-D2.17 | < blank > |
| P-EIS-HETL-MAG-D2.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D2.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-D2.35 | < blank > |
| P-EIS-HETL-MAG-D2.36 | < blank > |
| P-EIS-HETL-MAG-D2.37 | < blank > |
| P-EIS-HETL-MAG-D2.38 | < blank > |
| P-EIS-HETL-MAG-D2.39 | < blank > |
| P-EIS-HETL-MAG-D2.40 | < blank > |
| P-EIS-HETL-MAG-D2.41 | < blank > |
| P-EIS-HETL-MAG-D2.42 | < blank > |
| P-EIS-HETL-MAG-D2.43 | < blank > |
| P-EIS-HETL-MAG-D2.44 | < blank > |
| P-EIS-HETL-MAG-D2.45 | < blank > |
| P-EIS-HETL-MAG-D2.46 | < blank > |
| P-EIS-HETL-MAG-D2.47 | < blank > |
| P-EIS-HETL-MAG-D2.48 | < blank > |
| P-EIS-HETL-MAG-D2.49 | < blank > |
| P-EIS-HETL-MAG-D2.50 | < blank > |
| P-EIS-HETL-MAG-D2.51 | < blank > |
| P-EIS-HETL-MAG-D2.52 | < blank > |
| P-EIS-HETL-MAG-D2.53 | < blank > |
| P-EIS-HETL-MAG-D2.54 | < blank > |
| P-EIS-HETL-MAG-D2.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-D2.56 | < blank > |
| P-EIS-HETL-MAG-D3.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-D3.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-D3.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-D3.4 | < blank > |
| P-EIS-HETL-MAG-D3.5 | < blank > |
| P-EIS-HETL-MAG-D3.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-D3.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-D3.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-D3.09 | The magnet length shall be <2 m |
| P-EIS-HETL-MAG-D3.10 | The magnet slot length shall be 2 m |
| P-EIS-HETL-MAG-D3.11 | The magnets dipole field B shall be 0.525 T |
| P-EIS-HETL-MAG-D3.12 | < blank > |
| P-EIS-HETL-MAG-D3.13 | < blank > |
| P-EIS-HETL-MAG-D3.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-D3.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-D3.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-D3.17 | < blank > |
| P-EIS-HETL-MAG-D3.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-D3.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-D3.35 | < blank > |
| P-EIS-HETL-MAG-D3.36 | < blank > |
| P-EIS-HETL-MAG-D3.37 | < blank > |
| P-EIS-HETL-MAG-D3.38 | < blank > |
| P-EIS-HETL-MAG-D3.39 | < blank > |
| P-EIS-HETL-MAG-D3.40 | < blank > |
| P-EIS-HETL-MAG-D3.41 | < blank > |
| P-EIS-HETL-MAG-D3.42 | < blank > |
| P-EIS-HETL-MAG-D3.43 | < blank > |
| P-EIS-HETL-MAG-D3.44 | < blank > |
| P-EIS-HETL-MAG-D3.45 | < blank > |
| P-EIS-HETL-MAG-D3.46 | < blank > |
| P-EIS-HETL-MAG-D3.47 | < blank > |
| P-EIS-HETL-MAG-D3.48 | < blank > |
| P-EIS-HETL-MAG-D3.49 | < blank > |
| P-EIS-HETL-MAG-D3.50 | < blank > |
| P-EIS-HETL-MAG-D3.51 | < blank > |
| P-EIS-HETL-MAG-D3.52 | < blank > |
| P-EIS-HETL-MAG-D3.53 | < blank > |
| P-EIS-HETL-MAG-D3.54 | < blank > |
| P-EIS-HETL-MAG-D3.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-D3.56 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.01 | The number of magnet functions shall be 1 |
| P-EIS-HETL-MAG-ESR_INJ_BMP.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.4 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.5 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-ESR_INJ_BMP.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-ESR_INJ_BMP.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-ESR_INJ_BMP.09 | The magnet length shall be <0.1 m |
| P-EIS-HETL-MAG-ESR_INJ_BMP.10 | The magnet slot length shall be 0.1 m |
| P-EIS-HETL-MAG-ESR_INJ_BMP.11 | The magnets dipole field B shall be 0.06 T |
| P-EIS-HETL-MAG-ESR_INJ_BMP.12 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.13 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-ESR_INJ_BMP.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.17 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.34 | The magnet shall be designed to limit Xtalk Requirements N (Yes or No) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.35 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.36 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.37 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.38 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.39 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.40 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.41 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.42 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.43 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.44 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.45 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.46 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.47 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.48 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.49 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.50 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.51 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.52 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.53 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.54 | < blank > |
| P-EIS-HETL-MAG-ESR_INJ_BMP.55 | The magnet design shall constrain the ext. fringe field N (Yes or No) |
| P-EIS-HETL-MAG-ESR_INJ_BMP.56 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-INDSEPT1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-INDSEPT1.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-INDSEPT1.4 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.5 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-INDSEPT1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-INDSEPT1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-INDSEPT1.09 | The magnet length shall be <1 m |
| P-EIS-HETL-MAG-INDSEPT1.10 | The magnet slot length shall be 1 m |
| P-EIS-HETL-MAG-INDSEPT1.11 | The magnets dipole field B shall be 1.051 T |
| P-EIS-HETL-MAG-INDSEPT1.12 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.13 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-INDSEPT1.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-INDSEPT1.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-INDSEPT1.17 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-INDSEPT1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-INDSEPT1.35 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.36 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.37 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.38 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.39 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.40 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.41 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.42 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.43 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.44 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.45 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.46 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.47 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.48 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.49 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.50 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.51 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.52 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.53 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.54 | < blank > |
| P-EIS-HETL-MAG-INDSEPT1.55 | The magnets shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-INDSEPT1.56 | < blank > |
| P-EIS-HETL-MAG-KH1.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-KH1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-KH1.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-KH1.4 | < blank > |
| P-EIS-HETL-MAG-KH1.5 | < blank > |
| P-EIS-HETL-MAG-KH1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-KH1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-KH1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-KH1.09 | The magnet length shall be <0.1 m |
| P-EIS-HETL-MAG-KH1.10 | The magnet slot length shall be 0.1 m |
| P-EIS-HETL-MAG-KH1.11 | The magnets dipole field B shall be 0.076 T |
| P-EIS-HETL-MAG-KH1.12 | < blank > |
| P-EIS-HETL-MAG-KH1.13 | < blank > |
| P-EIS-HETL-MAG-KH1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-KH1.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-KH1.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-KH1.17 | < blank > |
| P-EIS-HETL-MAG-KH1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KH1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-KH1.35 | < blank > |
| P-EIS-HETL-MAG-KH1.36 | < blank > |
| P-EIS-HETL-MAG-KH1.37 | < blank > |
| P-EIS-HETL-MAG-KH1.38 | < blank > |
| P-EIS-HETL-MAG-KH1.39 | < blank > |
| P-EIS-HETL-MAG-KH1.40 | < blank > |
| P-EIS-HETL-MAG-KH1.41 | < blank > |
| P-EIS-HETL-MAG-KH1.42 | < blank > |
| P-EIS-HETL-MAG-KH1.43 | < blank > |
| P-EIS-HETL-MAG-KH1.44 | < blank > |
| P-EIS-HETL-MAG-KH1.45 | < blank > |
| P-EIS-HETL-MAG-KH1.46 | < blank > |
| P-EIS-HETL-MAG-KH1.47 | < blank > |
| P-EIS-HETL-MAG-KH1.48 | < blank > |
| P-EIS-HETL-MAG-KH1.49 | < blank > |
| P-EIS-HETL-MAG-KH1.50 | < blank > |
| P-EIS-HETL-MAG-KH1.51 | < blank > |
| P-EIS-HETL-MAG-KH1.52 | < blank > |
| P-EIS-HETL-MAG-KH1.53 | < blank > |
| P-EIS-HETL-MAG-KH1.54 | < blank > |
| P-EIS-HETL-MAG-KH1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-KH1.56 | < blank > |
| P-EIS-HETL-MAG-KV1.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-KV1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-KV1.03 | The field direction shall be H (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-KV1.4 | < blank > |
| P-EIS-HETL-MAG-KV1.5 | < blank > |
| P-EIS-HETL-MAG-KV1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-KV1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-KV1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-KV1.09 | The magnet length shall be <0.1 m |
| P-EIS-HETL-MAG-KV1.10 | The magnet slot length shall be 0.1 m |
| P-EIS-HETL-MAG-KV1.11 | The magnets dipole field B shall be 0.076 T |
| P-EIS-HETL-MAG-KV1.12 | < blank > |
| P-EIS-HETL-MAG-KV1.13 | < blank > |
| P-EIS-HETL-MAG-KV1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-KV1.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-KV1.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-KV1.17 | < blank > |
| P-EIS-HETL-MAG-KV1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-KV1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-KV1.35 | < blank > |
| P-EIS-HETL-MAG-KV1.36 | < blank > |
| P-EIS-HETL-MAG-KV1.37 | < blank > |
| P-EIS-HETL-MAG-KV1.38 | < blank > |
| P-EIS-HETL-MAG-KV1.39 | < blank > |
| P-EIS-HETL-MAG-KV1.40 | < blank > |
| P-EIS-HETL-MAG-KV1.41 | < blank > |
| P-EIS-HETL-MAG-KV1.42 | < blank > |
| P-EIS-HETL-MAG-KV1.43 | < blank > |
| P-EIS-HETL-MAG-KV1.44 | < blank > |
| P-EIS-HETL-MAG-KV1.45 | < blank > |
| P-EIS-HETL-MAG-KV1.46 | < blank > |
| P-EIS-HETL-MAG-KV1.47 | < blank > |
| P-EIS-HETL-MAG-KV1.48 | < blank > |
| P-EIS-HETL-MAG-KV1.49 | < blank > |
| P-EIS-HETL-MAG-KV1.50 | < blank > |
| P-EIS-HETL-MAG-KV1.51 | < blank > |
| P-EIS-HETL-MAG-KV1.52 | < blank > |
| P-EIS-HETL-MAG-KV1.53 | < blank > |
| P-EIS-HETL-MAG-KV1.54 | < blank > |
| P-EIS-HETL-MAG-KV1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-KV1.56 | < blank > |
| P-EIS-HETL-MAG-Q1.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-Q1.02 | The magnet field type shall be Qu (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-Q1.3 | < blank > |
| P-EIS-HETL-MAG-Q1.04 | The magnet field rotation shall be No (No=norm, Sk=skew) |
| P-EIS-HETL-MAG-Q1.05 | The magnet minimal coil inner radius shall be 16 m |
| P-EIS-HETL-MAG-Q1.6 | < blank > |
| P-EIS-HETL-MAG-Q1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-Q1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-Q1.09 | The magnet length shall be <0.6 m |
| P-EIS-HETL-MAG-Q1.10 | The magnet slot length shall be 0.6 m |
| P-EIS-HETL-MAG-Q1.11 | < blank > |
| P-EIS-HETL-MAG-Q1.12 | The magnets gradiant field G shall be 23.75 T/m |
| P-EIS-HETL-MAG-Q1.13 | < blank > |
| P-EIS-HETL-MAG-Q1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-Q1.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-Q1.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-Q1.17 | < blank > |
| P-EIS-HETL-MAG-Q1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-Q1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-Q1.35 | < blank > |
| P-EIS-HETL-MAG-Q1.36 | < blank > |
| P-EIS-HETL-MAG-Q1.37 | < blank > |
| P-EIS-HETL-MAG-Q1.38 | < blank > |
| P-EIS-HETL-MAG-Q1.39 | < blank > |
| P-EIS-HETL-MAG-Q1.40 | < blank > |
| P-EIS-HETL-MAG-Q1.41 | < blank > |
| P-EIS-HETL-MAG-Q1.42 | < blank > |
| P-EIS-HETL-MAG-Q1.43 | < blank > |
| P-EIS-HETL-MAG-Q1.44 | < blank > |
| P-EIS-HETL-MAG-Q1.45 | < blank > |
| P-EIS-HETL-MAG-Q1.46 | < blank > |
| P-EIS-HETL-MAG-Q1.47 | < blank > |
| P-EIS-HETL-MAG-Q1.48 | < blank > |
| P-EIS-HETL-MAG-Q1.49 | < blank > |
| P-EIS-HETL-MAG-Q1.50 | < blank > |
| P-EIS-HETL-MAG-Q1.51 | < blank > |
| P-EIS-HETL-MAG-Q1.52 | < blank > |
| P-EIS-HETL-MAG-Q1.53 | < blank > |
| P-EIS-HETL-MAG-Q1.54 | < blank > |
| P-EIS-HETL-MAG-Q1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-Q1.56 | < blank > |
| P-EIS-HETL-MAG-SEPT1.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-SEPT1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-SEPT1.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-SEPT1.4 | < blank > |
| P-EIS-HETL-MAG-SEPT1.5 | < blank > |
| P-EIS-HETL-MAG-SEPT1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-SEPT1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-SEPT1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-SEPT1.09 | The magnet length shall be <1.3 m |
| P-EIS-HETL-MAG-SEPT1.10 | The magnet slot length shall be 1.3 m |
| P-EIS-HETL-MAG-SEPT1.11 | The magnets dipole field B shall be 0.924 T |
| P-EIS-HETL-MAG-SEPT1.12 | < blank > |
| P-EIS-HETL-MAG-SEPT1.13 | < blank > |
| P-EIS-HETL-MAG-SEPT1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-SEPT1.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-SEPT1.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-SEPT1.17 | < blank > |
| P-EIS-HETL-MAG-SEPT1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-SEPT1.35 | < blank > |
| P-EIS-HETL-MAG-SEPT1.36 | < blank > |
| P-EIS-HETL-MAG-SEPT1.37 | < blank > |
| P-EIS-HETL-MAG-SEPT1.38 | < blank > |
| P-EIS-HETL-MAG-SEPT1.39 | < blank > |
| P-EIS-HETL-MAG-SEPT1.40 | < blank > |
| P-EIS-HETL-MAG-SEPT1.41 | < blank > |
| P-EIS-HETL-MAG-SEPT1.42 | < blank > |
| P-EIS-HETL-MAG-SEPT1.43 | < blank > |
| P-EIS-HETL-MAG-SEPT1.44 | < blank > |
| P-EIS-HETL-MAG-SEPT1.45 | < blank > |
| P-EIS-HETL-MAG-SEPT1.46 | < blank > |
| P-EIS-HETL-MAG-SEPT1.47 | < blank > |
| P-EIS-HETL-MAG-SEPT1.48 | < blank > |
| P-EIS-HETL-MAG-SEPT1.49 | < blank > |
| P-EIS-HETL-MAG-SEPT1.50 | < blank > |
| P-EIS-HETL-MAG-SEPT1.51 | < blank > |
| P-EIS-HETL-MAG-SEPT1.52 | < blank > |
| P-EIS-HETL-MAG-SEPT1.53 | < blank > |
| P-EIS-HETL-MAG-SEPT1.54 | < blank > |
| P-EIS-HETL-MAG-SEPT1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-SEPT1.56 | < blank > |
| P-EIS-HETL-MAG-SEPT2.01 | The magnet shall have a single function. |
| P-EIS-HETL-MAG-SEPT2.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-HETL-MAG-SEPT2.03 | The field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-HETL-MAG-SEPT2.4 | < blank > |
| P-EIS-HETL-MAG-SEPT2.5 | < blank > |
| P-EIS-HETL-MAG-SEPT2.06 | The magnet minimal gap shall be 32 m |
| P-EIS-HETL-MAG-SEPT2.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-HETL-MAG-SEPT2.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-HETL-MAG-SEPT2.09 | The magnet length shall be <2.49 m |
| P-EIS-HETL-MAG-SEPT2.10 | The magnet slot length shall be 2.49 m |
| P-EIS-HETL-MAG-SEPT2.11 | The magnets dipole field B shall be 0.82 T |
| P-EIS-HETL-MAG-SEPT2.12 | < blank > |
| P-EIS-HETL-MAG-SEPT2.13 | < blank > |
| P-EIS-HETL-MAG-SEPT2.14 | The magnets field stability shall be TBD T/s |
| P-EIS-HETL-MAG-SEPT2.15 | The magnet harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-HETL-MAG-SEPT2.16 | The magnet Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-HETL-MAG-SEPT2.17 | < blank > |
| P-EIS-HETL-MAG-SEPT2.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-HETL-MAG-SEPT2.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-HETL-MAG-SEPT2.35 | < blank > |
| P-EIS-HETL-MAG-SEPT2.36 | < blank > |
| P-EIS-HETL-MAG-SEPT2.37 | < blank > |
| P-EIS-HETL-MAG-SEPT2.38 | < blank > |
| P-EIS-HETL-MAG-SEPT2.39 | < blank > |
| P-EIS-HETL-MAG-SEPT2.40 | < blank > |
| P-EIS-HETL-MAG-SEPT2.41 | < blank > |
| P-EIS-HETL-MAG-SEPT2.42 | < blank > |
| P-EIS-HETL-MAG-SEPT2.43 | < blank > |
| P-EIS-HETL-MAG-SEPT2.44 | < blank > |
| P-EIS-HETL-MAG-SEPT2.45 | < blank > |
| P-EIS-HETL-MAG-SEPT2.46 | < blank > |
| P-EIS-HETL-MAG-SEPT2.47 | < blank > |
| P-EIS-HETL-MAG-SEPT2.48 | < blank > |
| P-EIS-HETL-MAG-SEPT2.49 | < blank > |
| P-EIS-HETL-MAG-SEPT2.50 | < blank > |
| P-EIS-HETL-MAG-SEPT2.51 | < blank > |
| P-EIS-HETL-MAG-SEPT2.52 | < blank > |
| P-EIS-HETL-MAG-SEPT2.53 | < blank > |
| P-EIS-HETL-MAG-SEPT2.54 | < blank > |
| P-EIS-HETL-MAG-SEPT2.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-HETL-MAG-SEPT2.56 | < blank > |
| P-EIS-HETL-PS-D1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-D1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-D1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-D1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-D1.5 | < blank > |
| P-EIS-HETL-PS-D1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-D1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-D1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-D1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-D1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-D1.11 | < blank > |
| P-EIS-HETL-PS-D1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-D1.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-D1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-D1.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-D1.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-D1.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-D1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-D1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-D1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-D1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-D1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-D1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-D1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-D1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-D1.26 | < blank > |
| P-EIS-HETL-PS-D1.27 | < blank > |
| P-EIS-HETL-PS-D1.28 | < blank > |
| P-EIS-HETL-PS-D1.29 | < blank > |
| P-EIS-HETL-PS-D1.30 | < blank > |
| P-EIS-HETL-PS-D1.31 | < blank > |
| P-EIS-HETL-PS-D1.32 | < blank > |
| P-EIS-HETL-PS-D1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-D1.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-D1.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-D1.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-D1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-D1.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-D1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-D1.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-D1.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-D1.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-D1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-D1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-D1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-D1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-D1.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-D2.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-D2.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-D2.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-D2.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-D2.5 | < blank > |
| P-EIS-HETL-PS-D2.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-D2.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-D2.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-D2.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-D2.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-D2.11 | < blank > |
| P-EIS-HETL-PS-D2.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-D2.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-D2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-D2.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-D2.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-D2.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-D2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-D2.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-D2.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-D2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-D2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-D2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-D2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-D2.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-D2.26 | < blank > |
| P-EIS-HETL-PS-D2.27 | < blank > |
| P-EIS-HETL-PS-D2.28 | < blank > |
| P-EIS-HETL-PS-D2.29 | < blank > |
| P-EIS-HETL-PS-D2.30 | < blank > |
| P-EIS-HETL-PS-D2.31 | < blank > |
| P-EIS-HETL-PS-D2.32 | < blank > |
| P-EIS-HETL-PS-D2.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-D2.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-D2.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-D2.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-D2.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-D2.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-D2.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-D2.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-D2.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-D2.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-D2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-D2.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-D2.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-D2.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-D2.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-D3.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-D3.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-D3.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-D3.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-D3.5 | < blank > |
| P-EIS-HETL-PS-D3.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-D3.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-D3.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-D3.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-D3.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-D3.11 | < blank > |
| P-EIS-HETL-PS-D3.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-D3.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-D3.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-D3.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-D3.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-D3.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-D3.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-D3.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-D3.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-D3.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-D3.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-D3.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-D3.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-D3.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-D3.26 | < blank > |
| P-EIS-HETL-PS-D3.27 | < blank > |
| P-EIS-HETL-PS-D3.28 | < blank > |
| P-EIS-HETL-PS-D3.29 | < blank > |
| P-EIS-HETL-PS-D3.30 | < blank > |
| P-EIS-HETL-PS-D3.31 | < blank > |
| P-EIS-HETL-PS-D3.32 | < blank > |
| P-EIS-HETL-PS-D3.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-D3.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-D3.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-D3.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-D3.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-D3.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-D3.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-D3.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-D3.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-D3.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-D3.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-D3.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-D3.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-D3.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-D3.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-ESR_INJ_BMP.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-ESR_INJ_BMP.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-ESR_INJ_BMP.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-ESR_INJ_BMP.5 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-ESR_INJ_BMP.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-ESR_INJ_BMP.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-ESR_INJ_BMP.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-ESR_INJ_BMP.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-ESR_INJ_BMP.11 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-ESR_INJ_BMP.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-ESR_INJ_BMP.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-ESR_INJ_BMP.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-ESR_INJ_BMP.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-ESR_INJ_BMP.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-ESR_INJ_BMP.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-ESR_INJ_BMP.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-ESR_INJ_BMP.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-ESR_INJ_BMP.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-ESR_INJ_BMP.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-ESR_INJ_BMP.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-ESR_INJ_BMP.26 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.27 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.28 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.29 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.30 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.31 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.32 | < blank > |
| P-EIS-HETL-PS-ESR_INJ_BMP.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-ESR_INJ_BMP.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-ESR_INJ_BMP.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-ESR_INJ_BMP.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-INDSEPT1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-INDSEPT1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-INDSEPT1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-INDSEPT1.5 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-INDSEPT1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-INDSEPT1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-INDSEPT1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-INDSEPT1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-INDSEPT1.11 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-INDSEPT1.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-INDSEPT1.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-INDSEPT1.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-INDSEPT1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-INDSEPT1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-INDSEPT1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-INDSEPT1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-INDSEPT1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-INDSEPT1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-INDSEPT1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-INDSEPT1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-INDSEPT1.26 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.27 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.28 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.29 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.30 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.31 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.32 | < blank > |
| P-EIS-HETL-PS-INDSEPT1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-INDSEPT1.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-INDSEPT1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-INDSEPT1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-INDSEPT1.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-INDSEPT1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-INDSEPT1.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-KH1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-KH1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-KH1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-KH1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-KH1.5 | < blank > |
| P-EIS-HETL-PS-KH1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-KH1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-KH1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-KH1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-KH1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-KH1.11 | < blank > |
| P-EIS-HETL-PS-KH1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-KH1.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-KH1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-KH1.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-KH1.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-KH1.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-KH1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-KH1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-KH1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-KH1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-KH1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-KH1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-KH1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-KH1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-KH1.26 | < blank > |
| P-EIS-HETL-PS-KH1.27 | < blank > |
| P-EIS-HETL-PS-KH1.28 | < blank > |
| P-EIS-HETL-PS-KH1.29 | < blank > |
| P-EIS-HETL-PS-KH1.30 | < blank > |
| P-EIS-HETL-PS-KH1.31 | < blank > |
| P-EIS-HETL-PS-KH1.32 | < blank > |
| P-EIS-HETL-PS-KH1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-KH1.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-KH1.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-KH1.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-KH1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-KH1.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-KH1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-KH1.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-KH1.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-KH1.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-KH1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-KH1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-KH1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-KH1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-KH1.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-KV1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-KV1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-KV1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-KV1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-KV1.5 | < blank > |
| P-EIS-HETL-PS-KV1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-KV1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-KV1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-KV1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-KV1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-KV1.11 | < blank > |
| P-EIS-HETL-PS-KV1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-KV1.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-KV1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-KV1.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-KV1.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-KV1.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-KV1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-KV1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-KV1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-KV1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-KV1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-KV1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-KV1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-KV1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-KV1.26 | < blank > |
| P-EIS-HETL-PS-KV1.27 | < blank > |
| P-EIS-HETL-PS-KV1.28 | < blank > |
| P-EIS-HETL-PS-KV1.29 | < blank > |
| P-EIS-HETL-PS-KV1.30 | < blank > |
| P-EIS-HETL-PS-KV1.31 | < blank > |
| P-EIS-HETL-PS-KV1.32 | < blank > |
| P-EIS-HETL-PS-KV1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-KV1.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-KV1.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-KV1.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-KV1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-KV1.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-KV1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-KV1.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-KV1.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-KV1.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-KV1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-KV1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-KV1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-KV1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-KV1.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-Q1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-Q1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-Q1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-Q1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-Q1.5 | < blank > |
| P-EIS-HETL-PS-Q1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-Q1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-Q1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-Q1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-Q1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-Q1.11 | < blank > |
| P-EIS-HETL-PS-Q1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-Q1.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-Q1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-Q1.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-Q1.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-Q1.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-Q1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-Q1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-Q1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-Q1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-Q1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-Q1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-Q1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-Q1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-Q1.26 | < blank > |
| P-EIS-HETL-PS-Q1.27 | < blank > |
| P-EIS-HETL-PS-Q1.28 | < blank > |
| P-EIS-HETL-PS-Q1.29 | < blank > |
| P-EIS-HETL-PS-Q1.30 | < blank > |
| P-EIS-HETL-PS-Q1.31 | < blank > |
| P-EIS-HETL-PS-Q1.32 | < blank > |
| P-EIS-HETL-PS-Q1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-Q1.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-Q1.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-Q1.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-Q1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-Q1.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-Q1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-Q1.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-Q1.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-Q1.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-Q1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-Q1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-Q1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-Q1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-Q1.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-SEPT1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-SEPT1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-SEPT1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-SEPT1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-SEPT1.5 | < blank > |
| P-EIS-HETL-PS-SEPT1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-SEPT1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-SEPT1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-SEPT1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-SEPT1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-SEPT1.11 | < blank > |
| P-EIS-HETL-PS-SEPT1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-SEPT1.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-SEPT1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-SEPT1.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-SEPT1.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-SEPT1.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-SEPT1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-SEPT1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-SEPT1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-SEPT1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-SEPT1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-SEPT1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-SEPT1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-SEPT1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-SEPT1.26 | < blank > |
| P-EIS-HETL-PS-SEPT1.27 | < blank > |
| P-EIS-HETL-PS-SEPT1.28 | < blank > |
| P-EIS-HETL-PS-SEPT1.29 | < blank > |
| P-EIS-HETL-PS-SEPT1.30 | < blank > |
| P-EIS-HETL-PS-SEPT1.31 | < blank > |
| P-EIS-HETL-PS-SEPT1.32 | < blank > |
| P-EIS-HETL-PS-SEPT1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-SEPT1.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-SEPT1.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-SEPT1.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-SEPT1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-SEPT1.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-SEPT1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-SEPT1.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-SEPT1.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-SEPT1.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-SEPT1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-SEPT1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-SEPT1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-SEPT1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-SEPT1.47 | The magnet polarity connections shall be TBD |
| P-EIS-HETL-PS-SEPT2.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-HETL-PS-SEPT2.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-HETL-PS-SEPT2.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-HETL-PS-SEPT2.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-HETL-PS-SEPT2.5 | < blank > |
| P-EIS-HETL-PS-SEPT2.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-HETL-PS-SEPT2.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-HETL-PS-SEPT2.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-SEPT2.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-HETL-PS-SEPT2.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-HETL-PS-SEPT2.11 | < blank > |
| P-EIS-HETL-PS-SEPT2.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-HETL-PS-SEPT2.13 | The full power bandwidth required shall be TBD |
| P-EIS-HETL-PS-SEPT2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-HETL-PS-SEPT2.15 | The time period for specified stability shall be TBD s |
| P-EIS-HETL-PS-SEPT2.16 | The short term stability shall be TBD A/s |
| P-EIS-HETL-PS-SEPT2.17 | The long term stability shall be TBD A/s |
| P-EIS-HETL-PS-SEPT2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-HETL-PS-SEPT2.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-HETL-PS-SEPT2.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-HETL-PS-SEPT2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-HETL-PS-SEPT2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-HETL-PS-SEPT2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-HETL-PS-SEPT2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-HETL-PS-SEPT2.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-HETL-PS-SEPT2.26 | < blank > |
| P-EIS-HETL-PS-SEPT2.27 | < blank > |
| P-EIS-HETL-PS-SEPT2.28 | < blank > |
| P-EIS-HETL-PS-SEPT2.29 | < blank > |
| P-EIS-HETL-PS-SEPT2.30 | < blank > |
| P-EIS-HETL-PS-SEPT2.31 | < blank > |
| P-EIS-HETL-PS-SEPT2.32 | < blank > |
| P-EIS-HETL-PS-SEPT2.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-HETL-PS-SEPT2.34 | The magnet turns ratio shall be TBD |
| P-EIS-HETL-PS-SEPT2.35 | The terminal voltage shall be TBD V |
| P-EIS-HETL-PS-SEPT2.36 | The design shall have thermal switches TBD |
| P-EIS-HETL-PS-SEPT2.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-HETL-PS-SEPT2.38 | The design shall have water flow switches TBD |
| P-EIS-HETL-PS-SEPT2.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-HETL-PS-SEPT2.40 | The design shall have access controls interlocks TBD |
| P-EIS-HETL-PS-SEPT2.41 | The main terminals lug details shall be TBD |
| P-EIS-HETL-PS-SEPT2.42 | The lead end indications shall be TBD |
| P-EIS-HETL-PS-SEPT2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-HETL-PS-SEPT2.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-HETL-PS-SEPT2.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-HETL-PS-SEPT2.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-HETL-PS-SEPT2.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-MAG-DH1.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-DH1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-DH1.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-DH1.4 | < blank > |
| P-EIS-METL-MAG-DH1.5 | < blank > |
| P-EIS-METL-MAG-DH1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-METL-MAG-DH1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-DH1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-DH1.09 | The magnet length shall be <0.825 m |
| P-EIS-METL-MAG-DH1.10 | The magnet slot length shall be 0.825 m |
| P-EIS-METL-MAG-DH1.11 | The magnets dipole field B shall be 1.399 T |
| P-EIS-METL-MAG-DH1.12 | < blank > |
| P-EIS-METL-MAG-DH1.13 | < blank > |
| P-EIS-METL-MAG-DH1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-DH1.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-DH1.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-DH1.17 | |
| P-EIS-METL-MAG-DH1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-DH1.35 | < blank > |
| P-EIS-METL-MAG-DH1.36 | < blank > |
| P-EIS-METL-MAG-DH1.37 | < blank > |
| P-EIS-METL-MAG-DH1.38 | < blank > |
| P-EIS-METL-MAG-DH1.39 | < blank > |
| P-EIS-METL-MAG-DH1.40 | < blank > |
| P-EIS-METL-MAG-DH1.41 | < blank > |
| P-EIS-METL-MAG-DH1.42 | < blank > |
| P-EIS-METL-MAG-DH1.43 | < blank > |
| P-EIS-METL-MAG-DH1.44 | < blank > |
| P-EIS-METL-MAG-DH1.45 | < blank > |
| P-EIS-METL-MAG-DH1.46 | < blank > |
| P-EIS-METL-MAG-DH1.47 | < blank > |
| P-EIS-METL-MAG-DH1.48 | < blank > |
| P-EIS-METL-MAG-DH1.49 | < blank > |
| P-EIS-METL-MAG-DH1.50 | < blank > |
| P-EIS-METL-MAG-DH1.51 | < blank > |
| P-EIS-METL-MAG-DH1.52 | < blank > |
| P-EIS-METL-MAG-DH1.53 | < blank > |
| P-EIS-METL-MAG-DH1.54 | < blank > |
| P-EIS-METL-MAG-DH1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-DH1.56 | < blank > |
| P-EIS-METL-MAG-DH2.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-DH2.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-DH2.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-DH2.4 | < blank > |
| P-EIS-METL-MAG-DH2.5 | < blank > |
| P-EIS-METL-MAG-DH2.06 | The magnet minimal gap shall be 32 m |
| P-EIS-METL-MAG-DH2.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-DH2.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-DH2.09 | The magnet length shall be <0.5455 m |
| P-EIS-METL-MAG-DH2.10 | The magnet slot length shall be 0.5455 m |
| P-EIS-METL-MAG-DH2.11 | The magnets dipole field B shall be 1.298 T |
| P-EIS-METL-MAG-DH2.12 | < blank > |
| P-EIS-METL-MAG-DH2.13 | < blank > |
| P-EIS-METL-MAG-DH2.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-DH2.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-DH2.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-DH2.17 | |
| P-EIS-METL-MAG-DH2.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH2.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-DH2.35 | < blank > |
| P-EIS-METL-MAG-DH2.36 | < blank > |
| P-EIS-METL-MAG-DH2.37 | < blank > |
| P-EIS-METL-MAG-DH2.38 | < blank > |
| P-EIS-METL-MAG-DH2.39 | < blank > |
| P-EIS-METL-MAG-DH2.40 | < blank > |
| P-EIS-METL-MAG-DH2.41 | < blank > |
| P-EIS-METL-MAG-DH2.42 | < blank > |
| P-EIS-METL-MAG-DH2.43 | < blank > |
| P-EIS-METL-MAG-DH2.44 | < blank > |
| P-EIS-METL-MAG-DH2.45 | < blank > |
| P-EIS-METL-MAG-DH2.46 | < blank > |
| P-EIS-METL-MAG-DH2.47 | < blank > |
| P-EIS-METL-MAG-DH2.48 | < blank > |
| P-EIS-METL-MAG-DH2.49 | < blank > |
| P-EIS-METL-MAG-DH2.50 | < blank > |
| P-EIS-METL-MAG-DH2.51 | < blank > |
| P-EIS-METL-MAG-DH2.52 | < blank > |
| P-EIS-METL-MAG-DH2.53 | < blank > |
| P-EIS-METL-MAG-DH2.54 | < blank > |
| P-EIS-METL-MAG-DH2.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-DH2.56 | < blank > |
| P-EIS-METL-MAG-DH3.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-DH3.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-DH3.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-DH3.4 | < blank > |
| P-EIS-METL-MAG-DH3.5 | < blank > |
| P-EIS-METL-MAG-DH3.06 | The magnet minimal gap shall be 32 m |
| P-EIS-METL-MAG-DH3.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-DH3.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-DH3.09 | The magnet length shall be <0.117 m |
| P-EIS-METL-MAG-DH3.10 | The magnet slot length shall be 0.117 m |
| P-EIS-METL-MAG-DH3.11 | The magnets dipole field B shall be 0.881 T |
| P-EIS-METL-MAG-DH3.12 | < blank > |
| P-EIS-METL-MAG-DH3.13 | < blank > |
| P-EIS-METL-MAG-DH3.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-DH3.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-DH3.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-DH3.17 | |
| P-EIS-METL-MAG-DH3.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-DH3.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-DH3.35 | < blank > |
| P-EIS-METL-MAG-DH3.36 | < blank > |
| P-EIS-METL-MAG-DH3.37 | < blank > |
| P-EIS-METL-MAG-DH3.38 | < blank > |
| P-EIS-METL-MAG-DH3.39 | < blank > |
| P-EIS-METL-MAG-DH3.40 | < blank > |
| P-EIS-METL-MAG-DH3.41 | < blank > |
| P-EIS-METL-MAG-DH3.42 | < blank > |
| P-EIS-METL-MAG-DH3.43 | < blank > |
| P-EIS-METL-MAG-DH3.44 | < blank > |
| P-EIS-METL-MAG-DH3.45 | < blank > |
| P-EIS-METL-MAG-DH3.46 | < blank > |
| P-EIS-METL-MAG-DH3.47 | < blank > |
| P-EIS-METL-MAG-DH3.48 | < blank > |
| P-EIS-METL-MAG-DH3.49 | < blank > |
| P-EIS-METL-MAG-DH3.50 | < blank > |
| P-EIS-METL-MAG-DH3.51 | < blank > |
| P-EIS-METL-MAG-DH3.52 | < blank > |
| P-EIS-METL-MAG-DH3.53 | < blank > |
| P-EIS-METL-MAG-DH3.54 | < blank > |
| P-EIS-METL-MAG-DH3.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-DH3.56 | < blank > |
| P-EIS-METL-MAG-DV1.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-DV1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-DV1.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-DV1.4 | < blank > |
| P-EIS-METL-MAG-DV1.5 | < blank > |
| P-EIS-METL-MAG-DV1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-METL-MAG-DV1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-DV1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-DV1.09 | The magnet length shall be <1 m |
| P-EIS-METL-MAG-DV1.10 | The magnet slot length shall be 1 m |
| P-EIS-METL-MAG-DV1.11 | The magnets dipole field B shall be 0.061 T |
| P-EIS-METL-MAG-DV1.12 | < blank > |
| P-EIS-METL-MAG-DV1.13 | < blank > |
| P-EIS-METL-MAG-DV1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-DV1.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-DV1.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-DV1.17 | |
| P-EIS-METL-MAG-DV1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-DV1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-DV1.35 | < blank > |
| P-EIS-METL-MAG-DV1.36 | < blank > |
| P-EIS-METL-MAG-DV1.37 | < blank > |
| P-EIS-METL-MAG-DV1.38 | < blank > |
| P-EIS-METL-MAG-DV1.39 | < blank > |
| P-EIS-METL-MAG-DV1.40 | < blank > |
| P-EIS-METL-MAG-DV1.41 | < blank > |
| P-EIS-METL-MAG-DV1.42 | < blank > |
| P-EIS-METL-MAG-DV1.43 | < blank > |
| P-EIS-METL-MAG-DV1.44 | < blank > |
| P-EIS-METL-MAG-DV1.45 | < blank > |
| P-EIS-METL-MAG-DV1.46 | < blank > |
| P-EIS-METL-MAG-DV1.47 | < blank > |
| P-EIS-METL-MAG-DV1.48 | < blank > |
| P-EIS-METL-MAG-DV1.49 | < blank > |
| P-EIS-METL-MAG-DV1.50 | < blank > |
| P-EIS-METL-MAG-DV1.51 | < blank > |
| P-EIS-METL-MAG-DV1.52 | < blank > |
| P-EIS-METL-MAG-DV1.53 | < blank > |
| P-EIS-METL-MAG-DV1.54 | < blank > |
| P-EIS-METL-MAG-DV1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-DV1.56 | < blank > |
| P-EIS-METL-MAG-KH1.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-KH1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-KH1.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-KH1.4 | < blank > |
| P-EIS-METL-MAG-KH1.5 | < blank > |
| P-EIS-METL-MAG-KH1.06 | The magnet minimal gap shall be 32 m |
| P-EIS-METL-MAG-KH1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-KH1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-KH1.09 | The magnet length shall be <0.1 m |
| P-EIS-METL-MAG-KH1.10 | The magnet slot length shall be 0.1 m |
| P-EIS-METL-MAG-KH1.11 | The magnets dipole field B shall be 0.002 T |
| P-EIS-METL-MAG-KH1.12 | < blank > |
| P-EIS-METL-MAG-KH1.13 | < blank > |
| P-EIS-METL-MAG-KH1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-KH1.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-KH1.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-KH1.17 | |
| P-EIS-METL-MAG-KH1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-KH1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-KH1.35 | < blank > |
| P-EIS-METL-MAG-KH1.36 | < blank > |
| P-EIS-METL-MAG-KH1.37 | < blank > |
| P-EIS-METL-MAG-KH1.38 | < blank > |
| P-EIS-METL-MAG-KH1.39 | < blank > |
| P-EIS-METL-MAG-KH1.40 | < blank > |
| P-EIS-METL-MAG-KH1.41 | < blank > |
| P-EIS-METL-MAG-KH1.42 | < blank > |
| P-EIS-METL-MAG-KH1.43 | < blank > |
| P-EIS-METL-MAG-KH1.44 | < blank > |
| P-EIS-METL-MAG-KH1.45 | < blank > |
| P-EIS-METL-MAG-KH1.46 | < blank > |
| P-EIS-METL-MAG-KH1.47 | < blank > |
| P-EIS-METL-MAG-KH1.48 | < blank > |
| P-EIS-METL-MAG-KH1.49 | < blank > |
| P-EIS-METL-MAG-KH1.50 | < blank > |
| P-EIS-METL-MAG-KH1.51 | < blank > |
| P-EIS-METL-MAG-KH1.52 | < blank > |
| P-EIS-METL-MAG-KH1.53 | < blank > |
| P-EIS-METL-MAG-KH1.54 | < blank > |
| P-EIS-METL-MAG-KH1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-KH1.56 | < blank > |
| P-EIS-METL-MAG-KV1.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-KV1.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-KV1.03 | The magnet field direction shall be H (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-KV1.4 | < blank > |
| P-EIS-METL-MAG-KV1.5 | < blank > |
| P-EIS-METL-MAG-KV1.06 | The magnet minimal gap shall be 16 m |
| P-EIS-METL-MAG-KV1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-KV1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-KV1.09 | The magnet length shall be <0.1 m |
| P-EIS-METL-MAG-KV1.10 | The magnet slot length shall be 0.1 m |
| P-EIS-METL-MAG-KV1.11 | The magnets dipole field B shall be 0.002 T |
| P-EIS-METL-MAG-KV1.12 | < blank > |
| P-EIS-METL-MAG-KV1.13 | < blank > |
| P-EIS-METL-MAG-KV1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-KV1.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-KV1.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-KV1.17 | |
| P-EIS-METL-MAG-KV1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-KV1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-KV1.35 | < blank > |
| P-EIS-METL-MAG-KV1.36 | < blank > |
| P-EIS-METL-MAG-KV1.37 | < blank > |
| P-EIS-METL-MAG-KV1.38 | < blank > |
| P-EIS-METL-MAG-KV1.39 | < blank > |
| P-EIS-METL-MAG-KV1.40 | < blank > |
| P-EIS-METL-MAG-KV1.41 | < blank > |
| P-EIS-METL-MAG-KV1.42 | < blank > |
| P-EIS-METL-MAG-KV1.43 | < blank > |
| P-EIS-METL-MAG-KV1.44 | < blank > |
| P-EIS-METL-MAG-KV1.45 | < blank > |
| P-EIS-METL-MAG-KV1.46 | < blank > |
| P-EIS-METL-MAG-KV1.47 | < blank > |
| P-EIS-METL-MAG-KV1.48 | < blank > |
| P-EIS-METL-MAG-KV1.49 | < blank > |
| P-EIS-METL-MAG-KV1.50 | < blank > |
| P-EIS-METL-MAG-KV1.51 | < blank > |
| P-EIS-METL-MAG-KV1.52 | < blank > |
| P-EIS-METL-MAG-KV1.53 | < blank > |
| P-EIS-METL-MAG-KV1.54 | < blank > |
| P-EIS-METL-MAG-KV1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-KV1.56 | < blank > |
| P-EIS-METL-MAG-Q1.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-Q1.02 | The magnet field type shall be Qu (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-Q1.3 | < blank > |
| P-EIS-METL-MAG-Q1.04 | The magnet field rotation shall be No (No=norm, Sk=skew) |
| P-EIS-METL-MAG-Q1.05 | The magnet minimal coil inner radius shall be 16 m |
| P-EIS-METL-MAG-Q1.6 | < blank > |
| P-EIS-METL-MAG-Q1.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-Q1.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-Q1.09 | The magnet length shall be <0.1 m |
| P-EIS-METL-MAG-Q1.10 | The magnet slot length shall be 0.1 m |
| P-EIS-METL-MAG-Q1.11 | < blank > |
| P-EIS-METL-MAG-Q1.12 | The magnets gradiant field G shall be 39.784 T/m |
| P-EIS-METL-MAG-Q1.13 | < blank > |
| P-EIS-METL-MAG-Q1.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-Q1.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-Q1.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-Q1.17 | |
| P-EIS-METL-MAG-Q1.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q1.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-Q1.35 | < blank > |
| P-EIS-METL-MAG-Q1.36 | < blank > |
| P-EIS-METL-MAG-Q1.37 | < blank > |
| P-EIS-METL-MAG-Q1.38 | < blank > |
| P-EIS-METL-MAG-Q1.39 | < blank > |
| P-EIS-METL-MAG-Q1.40 | < blank > |
| P-EIS-METL-MAG-Q1.41 | < blank > |
| P-EIS-METL-MAG-Q1.42 | < blank > |
| P-EIS-METL-MAG-Q1.43 | < blank > |
| P-EIS-METL-MAG-Q1.44 | < blank > |
| P-EIS-METL-MAG-Q1.45 | < blank > |
| P-EIS-METL-MAG-Q1.46 | < blank > |
| P-EIS-METL-MAG-Q1.47 | < blank > |
| P-EIS-METL-MAG-Q1.48 | < blank > |
| P-EIS-METL-MAG-Q1.49 | < blank > |
| P-EIS-METL-MAG-Q1.50 | < blank > |
| P-EIS-METL-MAG-Q1.51 | < blank > |
| P-EIS-METL-MAG-Q1.52 | < blank > |
| P-EIS-METL-MAG-Q1.53 | < blank > |
| P-EIS-METL-MAG-Q1.54 | < blank > |
| P-EIS-METL-MAG-Q1.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-Q1.56 | < blank > |
| P-EIS-METL-MAG-Q_BATES.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-Q_BATES.02 | The magnet field type shall be Qu (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-Q_BATES.3 | < blank > |
| P-EIS-METL-MAG-Q_BATES.04 | The magnet field rotation shall be No (No=norm, Sk=skew) |
| P-EIS-METL-MAG-Q_BATES.05 | The magnet minimal coil inner radius shall be 16 m |
| P-EIS-METL-MAG-Q_BATES.6 | < blank > |
| P-EIS-METL-MAG-Q_BATES.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-Q_BATES.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-Q_BATES.09 | The magnet length shall be <0.2794 m |
| P-EIS-METL-MAG-Q_BATES.10 | The magnet slot length shall be 0.2794 m |
| P-EIS-METL-MAG-Q_BATES.11 | < blank > |
| P-EIS-METL-MAG-Q_BATES.12 | The magnets gradiant field G shall be 26.684 T/m |
| P-EIS-METL-MAG-Q_BATES.13 | < blank > |
| P-EIS-METL-MAG-Q_BATES.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-Q_BATES.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-Q_BATES.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-Q_BATES.17 | |
| P-EIS-METL-MAG-Q_BATES.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-Q_BATES.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-Q_BATES.35 | < blank > |
| P-EIS-METL-MAG-Q_BATES.36 | < blank > |
| P-EIS-METL-MAG-Q_BATES.37 | < blank > |
| P-EIS-METL-MAG-Q_BATES.38 | < blank > |
| P-EIS-METL-MAG-Q_BATES.39 | < blank > |
| P-EIS-METL-MAG-Q_BATES.40 | < blank > |
| P-EIS-METL-MAG-Q_BATES.41 | < blank > |
| P-EIS-METL-MAG-Q_BATES.42 | < blank > |
| P-EIS-METL-MAG-Q_BATES.43 | < blank > |
| P-EIS-METL-MAG-Q_BATES.44 | < blank > |
| P-EIS-METL-MAG-Q_BATES.45 | < blank > |
| P-EIS-METL-MAG-Q_BATES.46 | < blank > |
| P-EIS-METL-MAG-Q_BATES.47 | < blank > |
| P-EIS-METL-MAG-Q_BATES.48 | < blank > |
| P-EIS-METL-MAG-Q_BATES.49 | < blank > |
| P-EIS-METL-MAG-Q_BATES.50 | < blank > |
| P-EIS-METL-MAG-Q_BATES.51 | < blank > |
| P-EIS-METL-MAG-Q_BATES.52 | < blank > |
| P-EIS-METL-MAG-Q_BATES.53 | < blank > |
| P-EIS-METL-MAG-Q_BATES.54 | < blank > |
| P-EIS-METL-MAG-Q_BATES.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-Q_BATES.56 | < blank > |
| P-EIS-METL-MAG-SEPTUM.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-SEPTUM.02 | The magnet field type shall be Di (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-SEPTUM.03 | The magnet field direction shall be V (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-SEPTUM.4 | < blank > |
| P-EIS-METL-MAG-SEPTUM.5 | < blank > |
| P-EIS-METL-MAG-SEPTUM.06 | The magnet minimal gap shall be 32 m |
| P-EIS-METL-MAG-SEPTUM.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-SEPTUM.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-SEPTUM.09 | The magnet length shall be <0.5 m |
| P-EIS-METL-MAG-SEPTUM.10 | The magnet slot length shall be 0.5 m |
| P-EIS-METL-MAG-SEPTUM.11 | The magnets dipole field B shall be 0.896 T |
| P-EIS-METL-MAG-SEPTUM.12 | < blank > |
| P-EIS-METL-MAG-SEPTUM.13 | < blank > |
| P-EIS-METL-MAG-SEPTUM.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-SEPTUM.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-SEPTUM.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-SEPTUM.17 | |
| P-EIS-METL-MAG-SEPTUM.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-SEPTUM.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-SEPTUM.35 | < blank > |
| P-EIS-METL-MAG-SEPTUM.36 | < blank > |
| P-EIS-METL-MAG-SEPTUM.37 | < blank > |
| P-EIS-METL-MAG-SEPTUM.38 | < blank > |
| P-EIS-METL-MAG-SEPTUM.39 | < blank > |
| P-EIS-METL-MAG-SEPTUM.40 | < blank > |
| P-EIS-METL-MAG-SEPTUM.41 | < blank > |
| P-EIS-METL-MAG-SEPTUM.42 | < blank > |
| P-EIS-METL-MAG-SEPTUM.43 | < blank > |
| P-EIS-METL-MAG-SEPTUM.44 | < blank > |
| P-EIS-METL-MAG-SEPTUM.45 | < blank > |
| P-EIS-METL-MAG-SEPTUM.46 | < blank > |
| P-EIS-METL-MAG-SEPTUM.47 | < blank > |
| P-EIS-METL-MAG-SEPTUM.48 | < blank > |
| P-EIS-METL-MAG-SEPTUM.49 | < blank > |
| P-EIS-METL-MAG-SEPTUM.50 | < blank > |
| P-EIS-METL-MAG-SEPTUM.51 | < blank > |
| P-EIS-METL-MAG-SEPTUM.52 | < blank > |
| P-EIS-METL-MAG-SEPTUM.53 | < blank > |
| P-EIS-METL-MAG-SEPTUM.54 | < blank > |
| P-EIS-METL-MAG-SEPTUM.55 | The magnets shall not be designed to constrain the ext. fringe feild requirements |
| P-EIS-METL-MAG-SEPTUM.56 | < blank > |
| P-EIS-METL-MAG-SPINSOL.01 | The magnet shall have a single function. |
| P-EIS-METL-MAG-SPINSOL.02 | The magnet field type shall be So (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-METL-MAG-SPINSOL.03 | The magnet field direction shall be Z (V=vertical,H=horizontal,Z=beam direction ) |
| P-EIS-METL-MAG-SPINSOL.4 | < blank > |
| P-EIS-METL-MAG-SPINSOL.5 | < blank > |
| P-EIS-METL-MAG-SPINSOL.6 | < blank > |
| P-EIS-METL-MAG-SPINSOL.07 | The magnet good field aperture drx shall be TBD m |
| P-EIS-METL-MAG-SPINSOL.08 | The magnet good field aperture dry shall be TBD m |
| P-EIS-METL-MAG-SPINSOL.09 | The magnet length shall be <0.6 m |
| P-EIS-METL-MAG-SPINSOL.10 | The magnet slot length shall be 0.6 m |
| P-EIS-METL-MAG-SPINSOL.11 | The magnets dipole field B shall be 3.667 T |
| P-EIS-METL-MAG-SPINSOL.12 | < blank > |
| P-EIS-METL-MAG-SPINSOL.13 | < blank > |
| P-EIS-METL-MAG-SPINSOL.14 | The magnets field stability shall be TBD T/s |
| P-EIS-METL-MAG-SPINSOL.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-METL-MAG-SPINSOL.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-METL-MAG-SPINSOL.17 | |
| P-EIS-METL-MAG-SPINSOL.18 | The Bore multipole content shall have a 1st order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.19 | The Bore multipole content shall have a 2nd order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.20 | The Bore multipole content shall have a 3rd order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.21 | The Bore multipole content shall have a 4th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.22 | The Bore multipole content shall have a 5th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.23 | The Bore multipole content shall have a 6th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.24 | The Bore multipole content shall have a 7th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.25 | The Bore multipole content shall have a 8th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.26 | The Bore multipole content shall have a 9th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.27 | The Bore multipole content shall have a 10th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.28 | The Bore multipole content shall have a 11th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.29 | The Bore multipole content shall have a 12th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.30 | The Bore multipole content shall have a 13th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.31 | The Bore multipole content shall have a 14th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.32 | The Bore multipole content shall have a 15th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.33 | The Bore multipole content shall have a 16th order of TBD (10^-4) |
| P-EIS-METL-MAG-SPINSOL.34 | The magnet shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-SPINSOL.35 | < blank > |
| P-EIS-METL-MAG-SPINSOL.36 | < blank > |
| P-EIS-METL-MAG-SPINSOL.37 | < blank > |
| P-EIS-METL-MAG-SPINSOL.38 | < blank > |
| P-EIS-METL-MAG-SPINSOL.39 | < blank > |
| P-EIS-METL-MAG-SPINSOL.40 | < blank > |
| P-EIS-METL-MAG-SPINSOL.41 | < blank > |
| P-EIS-METL-MAG-SPINSOL.42 | < blank > |
| P-EIS-METL-MAG-SPINSOL.43 | < blank > |
| P-EIS-METL-MAG-SPINSOL.44 | < blank > |
| P-EIS-METL-MAG-SPINSOL.45 | < blank > |
| P-EIS-METL-MAG-SPINSOL.46 | < blank > |
| P-EIS-METL-MAG-SPINSOL.47 | < blank > |
| P-EIS-METL-MAG-SPINSOL.48 | < blank > |
| P-EIS-METL-MAG-SPINSOL.49 | < blank > |
| P-EIS-METL-MAG-SPINSOL.50 | < blank > |
| P-EIS-METL-MAG-SPINSOL.51 | < blank > |
| P-EIS-METL-MAG-SPINSOL.52 | < blank > |
| P-EIS-METL-MAG-SPINSOL.53 | < blank > |
| P-EIS-METL-MAG-SPINSOL.54 | < blank > |
| P-EIS-METL-MAG-SPINSOL.55 | The magnets shall not be designed to limit Xtalk Requirements |
| P-EIS-METL-MAG-SPINSOL.56 | < blank > |
| P-EIS-METL-PS-DH1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-DH1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-DH1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-DH1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-DH1.5 | < blank > |
| P-EIS-METL-PS-DH1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-DH1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-DH1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DH1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DH1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-DH1.11 | < blank > |
| P-EIS-METL-PS-DH1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-DH1.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-DH1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-DH1.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-DH1.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-DH1.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-DH1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-DH1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-DH1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-DH1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-DH1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-DH1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-DH1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-DH1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-DH1.26 | < blank > |
| P-EIS-METL-PS-DH1.27 | < blank > |
| P-EIS-METL-PS-DH1.28 | < blank > |
| P-EIS-METL-PS-DH1.29 | < blank > |
| P-EIS-METL-PS-DH1.30 | < blank > |
| P-EIS-METL-PS-DH1.31 | < blank > |
| P-EIS-METL-PS-DH1.32 | < blank > |
| P-EIS-METL-PS-DH1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-DH1.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-DH1.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-DH1.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-DH1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-DH1.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-DH1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-DH1.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-DH1.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-DH1.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-DH1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-DH1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-DH1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-DH1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-DH1.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-DH2.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-DH2.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-DH2.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-DH2.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-DH2.5 | < blank > |
| P-EIS-METL-PS-DH2.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-DH2.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-DH2.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DH2.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DH2.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-DH2.11 | < blank > |
| P-EIS-METL-PS-DH2.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-DH2.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-DH2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-DH2.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-DH2.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-DH2.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-DH2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-DH2.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-DH2.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-DH2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-DH2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-DH2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-DH2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-DH2.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-DH2.26 | < blank > |
| P-EIS-METL-PS-DH2.27 | < blank > |
| P-EIS-METL-PS-DH2.28 | < blank > |
| P-EIS-METL-PS-DH2.29 | < blank > |
| P-EIS-METL-PS-DH2.30 | < blank > |
| P-EIS-METL-PS-DH2.31 | < blank > |
| P-EIS-METL-PS-DH2.32 | < blank > |
| P-EIS-METL-PS-DH2.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-DH2.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-DH2.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-DH2.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-DH2.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-DH2.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-DH2.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-DH2.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-DH2.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-DH2.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-DH2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-DH2.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-DH2.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-DH2.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-DH2.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-DH3.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-DH3.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-DH3.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-DH3.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-DH3.5 | < blank > |
| P-EIS-METL-PS-DH3.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-DH3.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-DH3.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DH3.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DH3.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-DH3.11 | < blank > |
| P-EIS-METL-PS-DH3.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-DH3.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-DH3.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-DH3.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-DH3.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-DH3.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-DH3.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-DH3.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-DH3.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-DH3.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-DH3.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-DH3.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-DH3.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-DH3.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-DH3.26 | < blank > |
| P-EIS-METL-PS-DH3.27 | < blank > |
| P-EIS-METL-PS-DH3.28 | < blank > |
| P-EIS-METL-PS-DH3.29 | < blank > |
| P-EIS-METL-PS-DH3.30 | < blank > |
| P-EIS-METL-PS-DH3.31 | < blank > |
| P-EIS-METL-PS-DH3.32 | < blank > |
| P-EIS-METL-PS-DH3.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-DH3.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-DH3.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-DH3.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-DH3.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-DH3.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-DH3.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-DH3.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-DH3.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-DH3.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-DH3.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-DH3.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-DH3.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-DH3.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-DH3.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-DV1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-DV1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-DV1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-DV1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-DV1.5 | < blank > |
| P-EIS-METL-PS-DV1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-DV1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-DV1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DV1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-DV1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-DV1.11 | < blank > |
| P-EIS-METL-PS-DV1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-DV1.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-DV1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-DV1.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-DV1.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-DV1.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-DV1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-DV1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-DV1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-DV1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-DV1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-DV1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-DV1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-DV1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-DV1.26 | < blank > |
| P-EIS-METL-PS-DV1.27 | < blank > |
| P-EIS-METL-PS-DV1.28 | < blank > |
| P-EIS-METL-PS-DV1.29 | < blank > |
| P-EIS-METL-PS-DV1.30 | < blank > |
| P-EIS-METL-PS-DV1.31 | < blank > |
| P-EIS-METL-PS-DV1.32 | < blank > |
| P-EIS-METL-PS-DV1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-DV1.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-DV1.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-DV1.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-DV1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-DV1.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-DV1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-DV1.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-DV1.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-DV1.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-DV1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-DV1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-DV1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-DV1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-DV1.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-KH1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-KH1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-KH1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-KH1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-KH1.5 | < blank > |
| P-EIS-METL-PS-KH1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-KH1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-KH1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-KH1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-KH1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-KH1.11 | < blank > |
| P-EIS-METL-PS-KH1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-KH1.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-KH1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-KH1.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-KH1.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-KH1.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-KH1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-KH1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-KH1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-KH1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-KH1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-KH1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-KH1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-KH1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-KH1.26 | < blank > |
| P-EIS-METL-PS-KH1.27 | < blank > |
| P-EIS-METL-PS-KH1.28 | < blank > |
| P-EIS-METL-PS-KH1.29 | < blank > |
| P-EIS-METL-PS-KH1.30 | < blank > |
| P-EIS-METL-PS-KH1.31 | < blank > |
| P-EIS-METL-PS-KH1.32 | < blank > |
| P-EIS-METL-PS-KH1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-KH1.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-KH1.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-KH1.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-KH1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-KH1.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-KH1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-KH1.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-KH1.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-KH1.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-KH1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-KH1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-KH1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-KH1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-KH1.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-KV1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-KV1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-KV1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-KV1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-KV1.5 | < blank > |
| P-EIS-METL-PS-KV1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-KV1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-KV1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-KV1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-KV1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-KV1.11 | < blank > |
| P-EIS-METL-PS-KV1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-KV1.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-KV1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-KV1.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-KV1.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-KV1.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-KV1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-KV1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-KV1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-KV1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-KV1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-KV1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-KV1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-KV1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-KV1.26 | < blank > |
| P-EIS-METL-PS-KV1.27 | < blank > |
| P-EIS-METL-PS-KV1.28 | < blank > |
| P-EIS-METL-PS-KV1.29 | < blank > |
| P-EIS-METL-PS-KV1.30 | < blank > |
| P-EIS-METL-PS-KV1.31 | < blank > |
| P-EIS-METL-PS-KV1.32 | < blank > |
| P-EIS-METL-PS-KV1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-KV1.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-KV1.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-KV1.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-KV1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-KV1.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-KV1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-KV1.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-KV1.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-KV1.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-KV1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-KV1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-KV1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-KV1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-KV1.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-Q1.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-Q1.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-Q1.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-Q1.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-Q1.5 | < blank > |
| P-EIS-METL-PS-Q1.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-Q1.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-Q1.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-Q1.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-Q1.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-Q1.11 | < blank > |
| P-EIS-METL-PS-Q1.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-Q1.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-Q1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-Q1.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-Q1.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-Q1.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-Q1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-Q1.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-Q1.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-Q1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-Q1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-Q1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-Q1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-Q1.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-Q1.26 | < blank > |
| P-EIS-METL-PS-Q1.27 | < blank > |
| P-EIS-METL-PS-Q1.28 | < blank > |
| P-EIS-METL-PS-Q1.29 | < blank > |
| P-EIS-METL-PS-Q1.30 | < blank > |
| P-EIS-METL-PS-Q1.31 | < blank > |
| P-EIS-METL-PS-Q1.32 | < blank > |
| P-EIS-METL-PS-Q1.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-Q1.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-Q1.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-Q1.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-Q1.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-Q1.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-Q1.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-Q1.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-Q1.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-Q1.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-Q1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-Q1.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-Q1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-Q1.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-Q1.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-Q_BATES.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-Q_BATES.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-Q_BATES.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-Q_BATES.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-Q_BATES.5 | < blank > |
| P-EIS-METL-PS-Q_BATES.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-Q_BATES.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-Q_BATES.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-Q_BATES.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-Q_BATES.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-Q_BATES.11 | < blank > |
| P-EIS-METL-PS-Q_BATES.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-Q_BATES.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-Q_BATES.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-Q_BATES.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-Q_BATES.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-Q_BATES.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-Q_BATES.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-Q_BATES.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-Q_BATES.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-Q_BATES.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-Q_BATES.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-Q_BATES.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-Q_BATES.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-Q_BATES.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-Q_BATES.26 | < blank > |
| P-EIS-METL-PS-Q_BATES.27 | < blank > |
| P-EIS-METL-PS-Q_BATES.28 | < blank > |
| P-EIS-METL-PS-Q_BATES.29 | < blank > |
| P-EIS-METL-PS-Q_BATES.30 | < blank > |
| P-EIS-METL-PS-Q_BATES.31 | < blank > |
| P-EIS-METL-PS-Q_BATES.32 | < blank > |
| P-EIS-METL-PS-Q_BATES.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-Q_BATES.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-Q_BATES.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-Q_BATES.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-Q_BATES.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-Q_BATES.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-Q_BATES.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-Q_BATES.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-Q_BATES.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-Q_BATES.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-Q_BATES.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-Q_BATES.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-Q_BATES.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-Q_BATES.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-Q_BATES.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-SEPTUM.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-SEPTUM.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-SEPTUM.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-SEPTUM.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-SEPTUM.5 | < blank > |
| P-EIS-METL-PS-SEPTUM.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-SEPTUM.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-SEPTUM.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-SEPTUM.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-SEPTUM.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-SEPTUM.11 | < blank > |
| P-EIS-METL-PS-SEPTUM.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-SEPTUM.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-SEPTUM.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-SEPTUM.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-SEPTUM.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-SEPTUM.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-SEPTUM.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-SEPTUM.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-SEPTUM.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-SEPTUM.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-SEPTUM.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-SEPTUM.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-SEPTUM.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-SEPTUM.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-SEPTUM.26 | < blank > |
| P-EIS-METL-PS-SEPTUM.27 | < blank > |
| P-EIS-METL-PS-SEPTUM.28 | < blank > |
| P-EIS-METL-PS-SEPTUM.29 | < blank > |
| P-EIS-METL-PS-SEPTUM.30 | < blank > |
| P-EIS-METL-PS-SEPTUM.31 | < blank > |
| P-EIS-METL-PS-SEPTUM.32 | < blank > |
| P-EIS-METL-PS-SEPTUM.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-SEPTUM.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-SEPTUM.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-SEPTUM.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-SEPTUM.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-SEPTUM.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-SEPTUM.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-SEPTUM.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-SEPTUM.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-SEPTUM.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-SEPTUM.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-SEPTUM.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-SEPTUM.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-SEPTUM.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-SEPTUM.47 | The magnet polarity connections shall be TBD |
| P-EIS-METL-PS-SPINSOL.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-METL-PS-SPINSOL.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-METL-PS-SPINSOL.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-METL-PS-SPINSOL.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-METL-PS-SPINSOL.5 | < blank > |
| P-EIS-METL-PS-SPINSOL.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-METL-PS-SPINSOL.07 | The nominal current of the magnets being powered shall be TBD A |
| P-EIS-METL-PS-SPINSOL.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-SPINSOL.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-METL-PS-SPINSOL.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-METL-PS-SPINSOL.11 | < blank > |
| P-EIS-METL-PS-SPINSOL.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-METL-PS-SPINSOL.13 | The full power bandwidth required shall be TBD |
| P-EIS-METL-PS-SPINSOL.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-METL-PS-SPINSOL.15 | The time period for specified stability shall be TBD s |
| P-EIS-METL-PS-SPINSOL.16 | The short term stability shall be TBD A/s |
| P-EIS-METL-PS-SPINSOL.17 | The long term stability shall be TBD A/s |
| P-EIS-METL-PS-SPINSOL.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-METL-PS-SPINSOL.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-METL-PS-SPINSOL.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-METL-PS-SPINSOL.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-METL-PS-SPINSOL.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-METL-PS-SPINSOL.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-METL-PS-SPINSOL.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-METL-PS-SPINSOL.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-METL-PS-SPINSOL.26 | < blank > |
| P-EIS-METL-PS-SPINSOL.27 | < blank > |
| P-EIS-METL-PS-SPINSOL.28 | < blank > |
| P-EIS-METL-PS-SPINSOL.29 | < blank > |
| P-EIS-METL-PS-SPINSOL.30 | < blank > |
| P-EIS-METL-PS-SPINSOL.31 | < blank > |
| P-EIS-METL-PS-SPINSOL.32 | < blank > |
| P-EIS-METL-PS-SPINSOL.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-METL-PS-SPINSOL.34 | The magnet turns ratio shall be TBD |
| P-EIS-METL-PS-SPINSOL.35 | The terminal voltage shall be TBD V |
| P-EIS-METL-PS-SPINSOL.36 | The design shall have thermal switches TBD |
| P-EIS-METL-PS-SPINSOL.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-METL-PS-SPINSOL.38 | The design shall have water flow switches TBD |
| P-EIS-METL-PS-SPINSOL.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-METL-PS-SPINSOL.40 | The design shall have access controls interlocks TBD |
| P-EIS-METL-PS-SPINSOL.41 | The main terminals lug details shall be TBD |
| P-EIS-METL-PS-SPINSOL.42 | The lead end indications shall be TBD |
| P-EIS-METL-PS-SPINSOL.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-METL-PS-SPINSOL.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-METL-PS-SPINSOL.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-METL-PS-SPINSOL.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-METL-PS-SPINSOL.47 | The magnet polarity connections shall be TBD |
| P-EIS-RCS-MAG-C0.21.11 | -10<b11<10 , -10<a11<10 (10^-4) |
| P-EIS-RCS-MAG-C0.21.12 | b12 -10<b12<10 , -10<a12<10 (10^-4) |
| P-EIS-RCS-MAG-C0.21.13 | b13 -10<b13<10 , -10<a13<10 (10^-4) |
| P-EIS-RCS-MAG-C0.21.14 | b14 -10<b14<10 , -10<a14<10 (10^-4) |
| P-EIS-RCS-MAG-C0.21.15 | b15 -10<b15<10 , -10<a15<10 (10^-4) |
| P-EIS-RCS-MAG-C0.21.16 | b16 -10<b16<10 , -10<a16<10 (10^-4) |
| P-EIS-RCS-MAG-D0.01 | The magnet shall have a single function. |
| P-EIS-RCS-MAG-D0.2 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.3 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.4 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.05 | The magnet shall have a Dipole field. |
| P-EIS-RCS-MAG-D0.06 | The magnet field shall have a vertical field direction. |
| P-EIS-RCS-MAG-D0.7 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.8 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.09 | The minimum magnet bore gap shall be 40 (mm). |
| P-EIS-RCS-MAG-D0.10 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.11 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.12 | The magnet physical length of the magnet shall be <1.77 (m) |
| P-EIS-RCS-MAG-D0.13 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.14 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.15 | The magnet integrated dipole field (min/max) B shall be 0.081\0.49 (Tm). |
| P-EIS-RCS-MAG-D0.15.1 | For the magnet at 3GeV Injection the integrated dipole field B shall be 0.08256 na.m |
| P-EIS-RCS-MAG-D0.15.2 | For the magnet at 18GeV Extraction the integrated dipole field B shall be 0.4896 na.m |
| P-EIS-RCS-MAG-D0.16 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.16.1 | Requirement Not Applicable. |
| P-EIS-RCS-MAG-D0.17 | The magnet field ramp rate shall be 2.55 (T/s). |
| P-EIS-RCS-MAG-D0.18 | The magnet to magnet field variability between magnets shall be < 0.1 %. |
| P-EIS-RCS-MAG-D0.19 | The harmonic reference radius for all energy levels (3, 5, 10, and 18 Gev) shall be 15 (mm) centered at (0,0) with respect to the magnetic axis. |
| P-EIS-RCS-MAG-D0.20 | The field at the reference radius shall be: 0.046 (T) at 3 Gev TBD (T) at 5 Gev TBD (T) at 10 GeV 0.277 (T) at 18 Gev |
| P-EIS-RCS-MAG-D0.21 | At the magnet the bore field shall have the following multipole content (units in 10^-4): |
| P-EIS-RCS-MAG-D0.21.1 | b1 = 10000 , a1 = 0 |
| P-EIS-RCS-MAG-D0.21.2 | -2.3 < b2 < 2.3 , -0.1 < a2 < 0.1 |
| P-EIS-RCS-MAG-D0.21.4 | -0.1 < b4 < 0.1 , 0 < a4 < 0.2 |
| P-EIS-RCS-MAG-D0.21.5 | 0.4 < b5 < 3 , 0 < a5 < 0.2 |
| P-EIS-RCS-MAG-D0.21.6 | -0.1 < b6 < 0.1 , 0 < a6 < 0.2 |
| P-EIS-RCS-MAG-D0.21.7 | -2 < b7 < 2 , 0 < a7 < 0.2 |
| P-EIS-RCS-MAG-D0.21.8 | -1 < b8 < 1 , 0 < a8 < 0.2 |
| P-EIS-RCS-MAG-D0.21.9 | -1 < b9 < 0 , 0.9 < a9 < 1.1 |
| P-EIS-RCS-MAG-D0.21.11 | 0 < b11 < 2 , 0.9 < a11 < 1.1 |
| P-EIS-RCS-MAG-D0.21.12 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.21.13 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.21.14 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.21.15 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.21.16 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.22 | The magnet shall be designed to limit CrossTalk requirements. |
| P-EIS-RCS-MAG-D0.23 | The magnet xtalk shall be constrained as described ; The dipoles shall be designed such that the crosstalk between successive dipoles in the ring is low eNugh to prevent the field from the adjacent dipoles having a significant effect on the beam. The residual crosstalk will need to be approved by beam physics. |
| P-EIS-RCS-MAG-D0.24 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.25 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.26 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.27 | The magnet has no specific constraints for external fringe field. |
| P-EIS-RCS-MAG-D0.28 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.29 | Magnetic field position and alignment within the magnet, TBG |
| P-EIS-RCS-MAG-D0.30 | The magnet shall be designed to fit within the following envelope. TBD |
| P-EIS-RCS-MAG-D0.31 | Magnet installation tolerances, TBD |
| P-EIS-RCS-MAG-D0.32 | The magnet shall be designed to have a splitable pole to accommodate the Vacuum beam pipe installation. |
| P-EIS-RCS-MAG-D0.33 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.34 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.35 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.36 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.37 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.38 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.39 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.40 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.41 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.42 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.43 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.44 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.45 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.46 | The magnet design and verification process shall ensure the final magnet will meet the reliability needs of the EIC over it planned operational life of 20 years. |
| P-EIS-RCS-MAG-D0.47 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of 20 years. |
| P-EIS-RCS-MAG-D0.48 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.49 | Requirement Not Applicable |
| P-EIS-RCS-MAG-D0.50 | Requirement Not Applicable |
| P-EIS-RCS-MAG-Q0.01 | The magnet shall have two functions. A magnet and a magnet |
| P-EIS-RCS-MAG-Q0.02 | The magnet function shall require trim coils capable of trimming the field of the magnet by +\- 0.05 (%) |
| P-EIS-RCS-MAG-Q0.03 | The magnet function shall require current taps for operation TBD (y/n) |
| P-EIS-RCS-MAG-Q0.04 | The magnet function shall require shunt(s) for operation TBD |
| P-EIS-RCS-MAG-Q0.05.01 | The main quadrupole shall have a Quadrupole field. |
| P-EIS-RCS-MAG-Q0.05.02 | The trim quadrupole shall have a Quadrupole field. |
| P-EIS-RCS-MAG-Q0.6 | < blank > |
| P-EIS-RCS-MAG-Q0.07 | The magnet shall have a normal field rotation. |
| P-EIS-RCS-MAG-Q0.9 | < blank > |
| P-EIS-RCS-MAG-Q0.10 | The magnet good field aperture dAx required shall be 15 (mm) |
| P-EIS-RCS-MAG-Q0.11 | The magnet good field aperture dAy required shall be 5 (mm) |
| P-EIS-RCS-MAG-Q0.12 | The magnet physical length of the magnet shall be <0.6 (m) |
| P-EIS-RCS-MAG-Q0.13 | The magnet model length shall be 0.6 (m) |
| P-EIS-RCS-MAG-Q0.14 | < blank > |
| P-EIS-RCS-MAG-Q0.15.1 | < blank > |
| P-EIS-RCS-MAG-Q0.15.2 | < blank > |
| P-EIS-RCS-MAG-Q0.16.1.1 | For the main quadrupole at 3GeV Injection the Integrated grad field G shall be 2.58 T/m.m |
| P-EIS-RCS-MAG-Q0.16.2.1 | For the trim quadrupole at 3GeV Injection the Integrated grad field G shall be 0.129 T/m.m |
| P-EIS-RCS-MAG-Q0.16.2.2 | For the trim quadrupole at 18GeV Extraction the Integrated grad field G shall be 0.765 T/m.m |
| P-EIS-RCS-MAG-Q0.17 | For the magnet at 3GeV Injection the peak ramp rate shall be 0.25 (T/m.s) |
| P-EIS-RCS-MAG-Q0.18 | For the magnet at 3GeV Injection the magnet-to-magnet field variability shall be < 0.001 (%) |
| P-EIS-RCS-MAG-Q0.19 | For magnet at 3GeV Injection the harmonic reference radius at the design energy of 18 GeV shall be 15 (mm) |
| P-EIS-RCS-MAG-Q0.20 | For magnet at 3GeV Injection the Field at the reference radius and design energy of 18 GeV shall be 4.3(T.m) |
| P-EIS-RCS-MAG-Q0.21 | At 3GeV Injection the magnet the bore field shall have the following multipole content: |
| P-EIS-RCS-MAG-Q0.21.1 | < blank > |
| P-EIS-RCS-MAG-Q0.21.2 | b2=10000 , a2=0 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.4 | -2<b4<2 , -0.1<a4<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.5 | -10<b5<10 , -0.1<a5<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.6 | 0.4<b6<2.4 , -0.1<a6<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.7 | -10<b7<10 , -0.1<a7<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.8 | -1<b8<1 , -0.1<a8<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.9 | -10<b9<10 , -0.1<a9<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.11 | -10<b11<10 , -0.1<a11<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.12 | b12 -2<b12<2 , -0.1<a12<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.13 | b13 -10<b13<10 , -0.1<a13<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.14 | b14 -7.1<b14<10.9 , -0.1<a14<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.15 | b15 -10<b15<10 , -0.1<a15<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.21.16 | b16 -10<b16<10 , -0.1<a16<0.1 (10^-4) |
| P-EIS-RCS-MAG-Q0.34 | < blank > |
| P-EIS-RCS-MAG-Q0.35 | The grad field G shall be T/m(n-1) |
| P-EIS-RCS-MAG-Q0.36 | The ramp rate shall be T/s |
| P-EIS-RCS-MAG-Q0.37 | The field stability shall be T/s |
| P-EIS-RCS-MAG-Q0.38 | The harmonic reference Radius and current shall be (mm,A) |
| P-EIS-RCS-MAG-Q0.39 | The Field at the reference radius and current shall be (T) |
| P-EIS-RCS-MAG-Q0.40 | < blank > |
| P-EIS-RCS-MAG-Q0.41 | The Bore multipole content shall have a 1st order of - (10^-4) |
| P-EIS-RCS-MAG-Q0.42 | The Bore multipole content shall have a 2nd order of b2=10000 , a2=0 (10^-4) |
| P-EIS-RCS-MAG-Q0.43 | The Bore multipole content shall have a 3rd order of -7<b3<7 , 0<a3<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.44 | The Bore multipole content shall have a 4th order of -2<b4<2 , 0<a4<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.45 | The Bore multipole content shall have a 5th order of -10<b5<10 , 0<a5<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.46 | The Bore multipole content shall have a 6th order of 0.4<b6<2.4 , 0<a6<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.47 | The Bore multipole content shall have a 7th order of -10<b7<10 , 0<a7<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.48 | The Bore multipole content shall have a 8th order of -1<b8<1 , 0<a8<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.49 | The Bore multipole content shall have a 9th order of -10<b9<10 , 0<a9<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.50 | The Bore multipole content shall have a 10th order of -1.3<b10<4.7 , 0<a10<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.51 | The Bore multipole content shall have a 11th order of -10<b11<10 , 0<a11<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.52 | The Bore multipole content shall have a 12th order of -2<b12<2 , 0<a12<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.53 | The Bore multipole content shall have a 13th order of -10<b13<10 , 0<a13<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.54 | The Bore multipole content shall have a 14th order of -7.1<b14<10.9 , 0<a14<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.55 | The Bore multipole content shall have a 15th order of -10<b15<10 , 0<a15<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0.56 | The Bore multipole content shall have a 16th order of -10<b16<10 , 0<a16<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.01 | The number of magnet functions shall be 1 |
| P-EIS-RCS-MAG-Q0_6.02 | The field type shall be Qu (Di,Qu,Sx,Oc,De,Do,Sol,Ki,Hk,Vk,Se) |
| P-EIS-RCS-MAG-Q0_6.3 | < blank > |
| P-EIS-RCS-MAG-Q0_6.04 | The field rotation shall be No (No=norm, Sk=skew) |
| P-EIS-RCS-MAG-Q0_6.05 | The min coil inner rad shall be 16 m |
| P-EIS-RCS-MAG-Q0_6.6 | < blank > |
| P-EIS-RCS-MAG-Q0_6.07 | The good field aperture drx required shall be 20.25 m |
| P-EIS-RCS-MAG-Q0_6.08 | The good field aperture dry required shall be 7.61 m |
| P-EIS-RCS-MAG-Q0_6.09 | The mag length shall be <0.6 m |
| P-EIS-RCS-MAG-Q0_6.10 | The eff Length shall be 0.6 m |
| P-EIS-RCS-MAG-Q0_6.11 | < blank > |
| P-EIS-RCS-MAG-Q0_6.12 | < blank > |
| P-EIS-RCS-MAG-Q0_6.13 | The ramp rate shall be 2.2 T/s |
| P-EIS-RCS-MAG-Q0_6.14 | The field stability shall be *1000 T/s |
| P-EIS-RCS-MAG-Q0_6.15 | The harmonic reference Radius and current shall be Ir=TBD[A]\Rr=16[mm] (mm,A) |
| P-EIS-RCS-MAG-Q0_6.16 | The Field at the reference radius and current shall be Bref=TBD (T) |
| P-EIS-RCS-MAG-Q0_6.17 | < blank > |
| P-EIS-RCS-MAG-Q0_6.18 | The Bore multipole content shall have a 1st order of - (10^-4) |
| P-EIS-RCS-MAG-Q0_6.19 | The Bore multipole content shall have a 2nd order of b2=10000 , a2=0 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.20 | The Bore multipole content shall have a 3rd order of -7<b3<7 , 0<a3<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.21 | The Bore multipole content shall have a 4th order of -2<b4<2 , 0<a4<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.22 | The Bore multipole content shall have a 5th order of -10<b5<10 , 0<a5<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.23 | The Bore multipole content shall have a 6th order of 0.4<b6<2.4 , 0<a6<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.24 | The Bore multipole content shall have a 7th order of -10<b7<10 , 0<a7<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.25 | The Bore multipole content shall have a 8th order of -1<b8<1 , 0<a8<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.26 | The Bore multipole content shall have a 9th order of -10<b9<10 , 0<a9<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.27 | The Bore multipole content shall have a 10th order of -1.3<b10<4.7 , 0<a10<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.28 | The Bore multipole content shall have a 11th order of -10<b11<10 , 0<a11<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.29 | The Bore multipole content shall have a 12th order of -2<b12<2 , 0<a12<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.30 | The Bore multipole content shall have a 13th order of -10<b13<10 , 0<a13<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.31 | The Bore multipole content shall have a 14th order of -7.1<b14<10.9 , 0<a14<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.32 | The Bore multipole content shall have a 15th order of -10<b15<10 , 0<a15<0.2 (10^-4) |
| P-EIS-RCS-MAG-Q0_6.33 | The Bore multipole content shall have a 16th order of -10<b16<10 , 0<a16<0.2 (10^-4) |
| P-EIS-RCS-MAG-S0.21.11 | -10<b11<10 , 0<a11<0.2 (10^-4) |
| P-EIS-RCS-MAG-S0.21.12 | b12 -10<b12<10 , 0<a12<0.2 (10^-4) |
| P-EIS-RCS-MAG-S0.21.13 | b13 -10<b13<10 , 0<a13<0.2 (10^-4) |
| P-EIS-RCS-MAG-S0.21.14 | b14 -10<b14<10 , 0<a14<0.2 (10^-4) |
| P-EIS-RCS-MAG-S0.21.15 | b15 -10<b15<10 , 0<a15<0.2 (10^-4) |
| P-EIS-RCS-MAG-S0.21.16 | b16 -10<b16<10 , 0<a16<0.2 (10^-4) |
| P-EIS-RCS-PS-C0.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-RCS-PS-C0.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-RCS-PS-C0.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-RCS-PS-C0.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-RCS-PS-C0.5 | < blank > |
| P-EIS-RCS-PS-C0.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-RCS-PS-C0.07 | The nominal current of the magnets being powered shall be 12.713724 A |
| P-EIS-RCS-PS-C0.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-C0.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-C0.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-RCS-PS-C0.11 | < blank > |
| P-EIS-RCS-PS-C0.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-RCS-PS-C0.13 | The full power bandwidth required shall be TBD |
| P-EIS-RCS-PS-C0.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-RCS-PS-C0.15 | The time period for specified stability shall be TBD s |
| P-EIS-RCS-PS-C0.16 | The short term stability shall be TBD A/s |
| P-EIS-RCS-PS-C0.17 | The long term stability shall be TBD A/s |
| P-EIS-RCS-PS-C0.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-RCS-PS-C0.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-RCS-PS-C0.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-RCS-PS-C0.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-RCS-PS-C0.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-RCS-PS-C0.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-RCS-PS-C0.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-RCS-PS-C0.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-RCS-PS-C0.26 | The voltage tap configuration shall be TBD |
| P-EIS-RCS-PS-C0.27 | The threshold levels shall be TBD V |
| P-EIS-RCS-PS-C0.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-EIS-RCS-PS-C0.29 | The design shall have quench heaters TBD Y/N |
| P-EIS-RCS-PS-C0.30 | The quench heater power rating shall be TBD W |
| P-EIS-RCS-PS-C0.31 | The design shall have warm up heaters TBD Y/N |
| P-EIS-RCS-PS-C0.32 | The warmup heater power rating shall be TBD W |
| P-EIS-RCS-PS-C0.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-RCS-PS-C0.34 | The magnet turns ratio shall be TBD |
| P-EIS-RCS-PS-C0.35 | The terminal voltage shall be TBD V |
| P-EIS-RCS-PS-C0.36 | The design shall have thermal switches TBD |
| P-EIS-RCS-PS-C0.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-RCS-PS-C0.38 | The design shall have water flow switches TBD |
| P-EIS-RCS-PS-C0.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-RCS-PS-C0.40 | The design shall have access controls interlocks TBD |
| P-EIS-RCS-PS-C0.41 | The main terminals lug details shall be TBD |
| P-EIS-RCS-PS-C0.42 | The lead end indications shall be TBD |
| P-EIS-RCS-PS-C0.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-RCS-PS-C0.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-RCS-PS-C0.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-RCS-PS-C0.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-RCS-PS-C0.47 | The magnet polarity connections shall be TBD |
| P-EIS-RCS-PS-D0.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-RCS-PS-D0.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-RCS-PS-D0.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-RCS-PS-D0.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-RCS-PS-D0.5 | < blank > |
| P-EIS-RCS-PS-D0.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-RCS-PS-D0.07 | The nominal current of the magnets being powered shall be 2111.2 A |
| P-EIS-RCS-PS-D0.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-D0.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-D0.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-RCS-PS-D0.11 | < blank > |
| P-EIS-RCS-PS-D0.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-RCS-PS-D0.13 | The full power bandwidth required shall be TBD |
| P-EIS-RCS-PS-D0.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-RCS-PS-D0.15 | The time period for specified stability shall be TBD s |
| P-EIS-RCS-PS-D0.16 | The short term stability shall be TBD A/s |
| P-EIS-RCS-PS-D0.17 | The long term stability shall be TBD A/s |
| P-EIS-RCS-PS-D0.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-RCS-PS-D0.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-RCS-PS-D0.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-RCS-PS-D0.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-RCS-PS-D0.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-RCS-PS-D0.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-RCS-PS-D0.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-RCS-PS-D0.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-RCS-PS-D0.26 | The voltage tap configuration shall be TBD |
| P-EIS-RCS-PS-D0.27 | The threshold levels shall be TBD V |
| P-EIS-RCS-PS-D0.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-EIS-RCS-PS-D0.29 | The design shall have quench heaters TBD Y/N |
| P-EIS-RCS-PS-D0.30 | The quench heater power rating shall be TBD W |
| P-EIS-RCS-PS-D0.31 | The design shall have warm up heaters TBD Y/N |
| P-EIS-RCS-PS-D0.32 | The warmup heater power rating shall be TBD W |
| P-EIS-RCS-PS-D0.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-RCS-PS-D0.34 | The magnet turns ratio shall be TBD |
| P-EIS-RCS-PS-D0.35 | The terminal voltage shall be TBD V |
| P-EIS-RCS-PS-D0.36 | The design shall have thermal switches TBD |
| P-EIS-RCS-PS-D0.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-RCS-PS-D0.38 | The design shall have water flow switches TBD |
| P-EIS-RCS-PS-D0.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-RCS-PS-D0.40 | The design shall have access controls interlocks TBD |
| P-EIS-RCS-PS-D0.41 | The main terminals lug details shall be TBD |
| P-EIS-RCS-PS-D0.42 | The lead end indications shall be TBD |
| P-EIS-RCS-PS-D0.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-RCS-PS-D0.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-RCS-PS-D0.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-RCS-PS-D0.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-RCS-PS-D0.47 | The magnet polarity connections shall be TBD |
| P-EIS-RCS-PS-Q0_6.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-RCS-PS-Q0_6.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-RCS-PS-Q0_6.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-RCS-PS-Q0_6.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-RCS-PS-Q0_6.5 | < blank > |
| P-EIS-RCS-PS-Q0_6.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-RCS-PS-Q0_6.07 | The nominal current of the magnets being powered shall be 1095.9 A |
| P-EIS-RCS-PS-Q0_6.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-Q0_6.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-Q0_6.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-RCS-PS-Q0_6.11 | < blank > |
| P-EIS-RCS-PS-Q0_6.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-RCS-PS-Q0_6.13 | The full power bandwidth required shall be TBD |
| P-EIS-RCS-PS-Q0_6.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-RCS-PS-Q0_6.15 | The time period for specified stability shall be TBD s |
| P-EIS-RCS-PS-Q0_6.16 | The short term stability shall be TBD A/s |
| P-EIS-RCS-PS-Q0_6.17 | The long term stability shall be TBD A/s |
| P-EIS-RCS-PS-Q0_6.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-RCS-PS-Q0_6.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-RCS-PS-Q0_6.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-RCS-PS-Q0_6.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-RCS-PS-Q0_6.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-RCS-PS-Q0_6.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-RCS-PS-Q0_6.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-RCS-PS-Q0_6.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-RCS-PS-Q0_6.26 | The voltage tap configuration shall be N/A |
| P-EIS-RCS-PS-Q0_6.27 | The threshold levels shall be N/A V |
| P-EIS-RCS-PS-Q0_6.28 | The peak di/dt without inducing a quench shall be N/A A/S |
| P-EIS-RCS-PS-Q0_6.29 | The design shall have quench heaters N/A Y/N |
| P-EIS-RCS-PS-Q0_6.30 | The quench heater power rating shall be N/A W |
| P-EIS-RCS-PS-Q0_6.31 | The design shall have warm up heaters N/A Y/N |
| P-EIS-RCS-PS-Q0_6.32 | The warmup heater power rating shall be N/A W |
| P-EIS-RCS-PS-Q0_6.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-RCS-PS-Q0_6.34 | The magnet turns ratio shall be TBD |
| P-EIS-RCS-PS-Q0_6.35 | The terminal voltage shall be TBD V |
| P-EIS-RCS-PS-Q0_6.36 | The design shall have thermal switches TBD |
| P-EIS-RCS-PS-Q0_6.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-RCS-PS-Q0_6.38 | The design shall have water flow switches TBD |
| P-EIS-RCS-PS-Q0_6.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-RCS-PS-Q0_6.40 | The design shall have access controls interlocks TBD |
| P-EIS-RCS-PS-Q0_6.41 | The main terminals lug details shall be TBD |
| P-EIS-RCS-PS-Q0_6.42 | The lead end indications shall be TBD |
| P-EIS-RCS-PS-Q0_6.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-RCS-PS-Q0_6.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-RCS-PS-Q0_6.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-RCS-PS-Q0_6.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-RCS-PS-Q0_6.47 | The magnet polarity connections shall be TBD |
| P-EIS-RCS-PS-SXT.01 | The number of Independent functions on the magnets being powered shall be 1 |
| P-EIS-RCS-PS-SXT.02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-EIS-RCS-PS-SXT.03 | The maximum magnet string inductance to be powered shall be TBD H |
| P-EIS-RCS-PS-SXT.04 | The magnets being powered shall be saturated TBD Y/N |
| P-EIS-RCS-PS-SXT.5 | < blank > |
| P-EIS-RCS-PS-SXT.06 | The voltage to ground of the magnet being powered shall be TBD V |
| P-EIS-RCS-PS-SXT.07 | The nominal current of the magnets being powered shall be 580 A |
| P-EIS-RCS-PS-SXT.08 | The minimum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-SXT.09 | The maximum current the PS must operate at shall be TBD A |
| P-EIS-RCS-PS-SXT.10 | The PS current type shall be DC (DC or AC) |
| P-EIS-RCS-PS-SXT.11 | < blank > |
| P-EIS-RCS-PS-SXT.12 | The peak waveshape di/dt during ramping shall be TBD |
| P-EIS-RCS-PS-SXT.13 | The full power bandwidth required shall be TBD |
| P-EIS-RCS-PS-SXT.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-EIS-RCS-PS-SXT.15 | The time period for specified stability shall be TBD s |
| P-EIS-RCS-PS-SXT.16 | The short term stability shall be TBD A/s |
| P-EIS-RCS-PS-SXT.17 | The long term stability shall be TBD A/s |
| P-EIS-RCS-PS-SXT.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-EIS-RCS-PS-SXT.19 | The synchronization required between PS's shall be TBD s |
| P-EIS-RCS-PS-SXT.20 | The synchronization timing of synchronization shall be TBD s |
| P-EIS-RCS-PS-SXT.21 | The max allowable current ripple (peak to peak) TBD A |
| P-EIS-RCS-PS-SXT.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-EIS-RCS-PS-SXT.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-EIS-RCS-PS-SXT.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-EIS-RCS-PS-SXT.25 | An NMR shall be required to measure the field TBD A/s |
| P-EIS-RCS-PS-SXT.26 | The voltage tap configuration shall be TBD |
| P-EIS-RCS-PS-SXT.27 | The threshold levels shall be TBD V |
| P-EIS-RCS-PS-SXT.28 | The peak di/dt without inducing a quench shall be TBD A/S |
| P-EIS-RCS-PS-SXT.29 | The design shall have quench heaters TBD Y/N |
| P-EIS-RCS-PS-SXT.30 | The quench heater power rating shall be TBD W |
| P-EIS-RCS-PS-SXT.31 | The design shall have warm up heaters TBD Y/N |
| P-EIS-RCS-PS-SXT.32 | The warmup heater power rating shall be TBD W |
| P-EIS-RCS-PS-SXT.33 | The current required to be shunted through the magnet shall be TBD |
| P-EIS-RCS-PS-SXT.34 | The magnet turns ratio shall be TBD |
| P-EIS-RCS-PS-SXT.35 | The terminal voltage shall be TBD V |
| P-EIS-RCS-PS-SXT.36 | The design shall have thermal switches TBD |
| P-EIS-RCS-PS-SXT.37 | The thermal switch connection numbers shall be TBD |
| P-EIS-RCS-PS-SXT.38 | The design shall have water flow switches TBD |
| P-EIS-RCS-PS-SXT.39 | The water flow switch connections numbers shall be TBD |
| P-EIS-RCS-PS-SXT.40 | The design shall have access controls interlocks TBD |
| P-EIS-RCS-PS-SXT.41 | The main terminals lug details shall be TBD |
| P-EIS-RCS-PS-SXT.42 | The lead end indications shall be TBD |
| P-EIS-RCS-PS-SXT.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-EIS-RCS-PS-SXT.44 | The lug details for the auxiliary windings shall be TBD |
| P-EIS-RCS-PS-SXT.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-EIS-RCS-PS-SXT.46 | The magnet drawing with terminations details shall be TBD |
| P-EIS-RCS-PS-SXT.47 | The magnet polarity connections shall be TBD |
| P-HSR-MAG-AR_CQS(Corr-H).03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-AR_CQS(Corr-H).04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-AR_CQS(Corr-H).05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-AR_CQS(Corr-H).06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-AR_CQS(Corr-H).07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-AR_CQS(Corr-H).08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-AR_CQS(Corr-H).09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-AR_CQS(Corr-H).10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-AR_CQS(Corr-HV).03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-AR_CQS(Corr-HV).04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-AR_CQS(Corr-HV).05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-AR_CQS(Corr-HV).06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-AR_CQS(Corr-HV).07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-AR_CQS(Corr-HV).08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-AR_CQS(Corr-HV).09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-AR_CQS(Corr-HV).10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-AR_CQS(Corr-V).03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-AR_CQS(Corr-V).04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-AR_CQS(Corr-V).05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-AR_CQS(Corr-V).06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-AR_CQS(Corr-V).07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-AR_CQS(Corr-V).08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-AR_CQS(Corr-V).09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-AR_CQS(Corr-V).10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-AR_CQS(Quad).03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-AR_CQS(Quad).04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-AR_CQS(Quad).05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-AR_CQS(Quad).06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-AR_CQS(Quad).07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-AR_CQS(Quad).08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-AR_CQS(Quad).09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-AR_CQS(Quad).10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-AR_CQS(Sxt).03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-AR_CQS(Sxt).04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-AR_CQS(Sxt).05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-AR_CQS(Sxt).06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-AR_CQS(Sxt).07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-AR_CQS(Sxt).08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-AR_CQS(Sxt).09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-AR_CQS(Sxt).10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-AR_D6.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-AR_D6.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-AR_D6.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-AR_D6.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-AR_D6.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-AR_D6.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-AR_D6.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-AR_D6.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-AR_D8.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-AR_D8.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-AR_D8.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-AR_D8.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-AR_D8.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-AR_D8.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-AR_D8.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-AR_D8.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-AR_D9.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-AR_D9.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-AR_D9.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-AR_D9.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-AR_D9.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-AR_D9.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-AR_D9.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-AR_D9.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-BXDS01A.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-BXDS01A.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-BXDS01A.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-BXDS01A.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-BXDS01A.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-BXDS01A.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-BXDS01A.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-BXDS01A.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-CORR_0.05m.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-CORR_0.05m.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-CORR_0.05m.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-CORR_0.05m.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-CQS(SXT).03 | The magnet is a CQS(SRE) RHIC Magnet, the multipole homogeneity measurements and transfer function are maintained in the BNL magnet repository. |
| P-HSR-MAG-CQS(SXT).04 | The magnet is a CQS(SRE) RHIC Magnet, the cross talk calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-CQS(SXT).05 | The magnet is a CQS(SRE) RHIC Magnet, the fringe field calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-CQS(SXT).06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-CQS(SXT).07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-CQS(SXT).08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-CQS(SXT).09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-CQS(SXT).10 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of >20 Years. |
| P-HSR-MAG-D5I.03 | The magnet is a Dipole(D5I) RHIC Magnet, the multipole homogeneity measurements and transfer function are maintained in the BNL magnet repository. |
| P-HSR-MAG-D5I.04 | The magnet is a Dipole(D5I) RHIC Magnet, the cross talk calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D5I.05 | The magnet is a Dipole(D5I) RHIC Magnet, the fringe field calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D5I.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-D5I.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-D5I.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-D5I.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-D5I.10 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of >20 Years. |
| P-HSR-MAG-D5O.03 | The magnet is a Dipole(D5O) RHIC Magnet, the multipole homogeneity measurements and transfer function are maintained in the BNL magnet repository. |
| P-HSR-MAG-D5O.04 | The magnet is a Dipole(D5O) RHIC Magnet, the cross talk calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D5O.05 | The magnet is a Dipole(D5O) RHIC Magnet, the fringe field calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D5O.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-D5O.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-D5O.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-D5O.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-D5O.10 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of >20 Years. |
| P-HSR-MAG-D5O_D5I.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-D5O_D5I.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-D5O_D5I.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-D5O_D5I.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-D5O_D5I.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-D5O_D5I.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-D5O_D5I.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-D5O_D5I.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-D6.03 | The magnet is a Dipole(D6) RHIC Magnet, the multipole homogeneity measurements and transfer function are maintained in the BNL magnet repository. |
| P-HSR-MAG-D6.04 | The magnet is a Dipole(D6) RHIC Magnet, the cross talk calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D6.05 | The magnet is a Dipole(D6) RHIC Magnet, the fringe field calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D6.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-D6.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-D6.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-D6.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-D6.10 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of >20 Years. |
| P-HSR-MAG-D8.03 | The magnet is a Dipole(D8) RHIC Magnet, the multipole homogeneity measurements and transfer function are maintained in the BNL magnet repository. |
| P-HSR-MAG-D8.04 | The magnet is a Dipole(D8) RHIC Magnet, the cross talk calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D8.05 | The magnet is a Dipole(D8) RHIC Magnet, the fringe field calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D8.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-D8.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-D8.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-D8.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-D8.10 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of >20 Years. |
| P-HSR-MAG-D8_IR02.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-D8_IR02.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-D8_IR02.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-D8_IR02.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-D8_IR02.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-D8_IR02.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-D8_IR02.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-D8_IR02.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-D8_IR06.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-D8_IR06.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-D8_IR06.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-D8_IR06.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-D8_IR06.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-D8_IR06.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-D8_IR06.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-D8_IR06.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-D9.03 | The magnet is a Dipole(D9) RHIC Magnet, the multipole homogeneity measurements and transfer function are maintained in the BNL magnet repository. |
| P-HSR-MAG-D9.04 | The magnet is a Dipole(D9) RHIC Magnet, the cross talk calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D9.05 | The magnet is a Dipole(D9) RHIC Magnet, the fringe field calculations are maintained in the BNL magnet repository. |
| P-HSR-MAG-D9.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-D9.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-D9.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-D9.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-D9.10 | The magnet shall be designed to operate reliably given the cumulative radiation dose it will experience over the lifetime of the EIC of >20 Years. |
| P-HSR-MAG-H5_QS3.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-H5_QS3.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-H5_QS3.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-H5_QS3.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-H5_QS3.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-H5_QS3.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-H5_QS3.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-H5_QS3.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-IR_Q5.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-IR_Q5.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-IR_Q5.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-IR_Q5.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-IR_Q5.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-IR_Q5.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-IR_Q5.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-IR_Q5.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-IR_Q6.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-IR_Q6.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-IR_Q6.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-IR_Q6.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-IR_Q6.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-IR_Q6.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-IR_Q6.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-IR_Q6.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-IR_Q8.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-IR_Q8.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-IR_Q8.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-IR_Q8.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-IR_Q8.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-IR_Q8.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-IR_Q8.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-IR_Q8.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-IR_Q9.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-IR_Q9.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-IR_Q9.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-IR_Q9.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-IR_Q9.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-IR_Q9.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-IR_Q9.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-IR_Q9.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-IR_VKICKER_0.025.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-IR_VKICKER_0.025.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-IR_VKICKER_0.025.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-IR_VKICKER_0.025.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-KA3.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-KA3.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-KA3.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-KA3.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-KA3.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-KA3.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-KA3.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-KA3.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-Q1.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-Q1.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-Q1.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-Q1.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-Q1.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-Q1.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-Q1.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-Q1.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-Q2.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-Q2.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-Q2.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-Q2.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-Q2.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-Q2.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-Q2.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-Q2.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-Q3.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-Q3.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-Q3.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-Q3.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-Q3.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-Q3.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-Q3.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-Q3.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-Q3PR.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-Q3PR.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-Q3PR.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-Q3PR.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-Q3PR.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-Q3PR.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-Q3PR.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-Q3PR.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-Q4.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-Q4.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-Q4.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-Q4.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-Q4.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-Q4.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-Q4.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-Q4.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-Q4PR.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-Q4PR.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-Q4PR.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-Q4PR.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-Q4PR.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-Q4PR.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-Q4PR.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-Q4PR.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-Q5.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-Q5.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-Q5.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-Q5.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-Q5.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-Q5.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-Q5.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-Q5.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-Q5PR.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-Q5PR.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-Q5PR.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-Q5PR.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-Q5PR.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-Q5PR.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-Q5PR.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-Q5PR.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-Q7.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-Q7.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-Q7.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-Q7.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-Q7.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-Q7.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-Q7.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-Q7.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-Q8.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-Q8.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-Q8.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-Q8.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-Q8.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-Q8.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-Q8.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-Q8.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-Q9.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-Q9.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-Q9.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-Q9.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-Q9.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-Q9.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-Q9.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-Q9.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-MAG-SLOWKICK_CORR.03 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its operational harmonic multipole content constraints. |
| P-HSR-MAG-SLOWKICK_CORR.04 | The magnet shall be measured using the multipole homogeneity measurement methodology defined to satisfy its crosstalk multipole content constraints. |
| P-HSR-MAG-SLOWKICK_CORR.05 | The magnet shall not be designed to constrain the external fringe field. |
| P-HSR-MAG-SLOWKICK_CORR.06 | The magnet shall be designed to be cooled and sustained at its operational temperature utilizing the proposed EIC cryogenic system which meets the following constraints: |
| P-HSR-MAG-SLOWKICK_CORR.07 | The magnet shall have an appropriate quench protection system which ensures all electromagnetic, thermal and cryogenic connected systems are not damaged in a quench event and meets the following constraints: |
| P-HSR-MAG-SLOWKICK_CORR.08 | All electrical connection to the magnet for the main current leads, instrumentation, Voltage taps, Current taps shall meet the appropriate interface requirements specified for those connections and meet the following constraints: |
| P-HSR-MAG-SLOWKICK_CORR.09 | The magnet is expected to sustain 20 years of EIC operation under nominal conditions. During these 20 operational years, the magnet is expected to survive the following: 40 thermal cycles, 120 quenches and 20000 power cycles. |
| P-HSR-MAG-SLOWKICK_CORR.10 | The magnet shall be designed with components capable to withstand a radiation dose of TBD MGy, or be approved by EIC for use in a specific location as shown in the “BNL Materials” List Doc. No. TBD. |
| P-HSR-PS-AR_CQS(Corr-H).01 | The number of Independent functions on the magnets being powered shall be RHIC |
| P-HSR-PS-AR_CQS(Corr-H).02 | The maximum magnet string resistance to be powered shall be TBD ohm |
| P-HSR-PS-AR_CQS(Corr-H).03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-AR_CQS(Corr-H).04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-AR_CQS(Corr-H).5 | < blank > |
| P-HSR-PS-AR_CQS(Corr-H).06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-AR_CQS(Corr-H).07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-AR_CQS(Corr-H).08 | The minimum current the PS must operate at shall be TBD A |
| P-HSR-PS-AR_CQS(Corr-H).09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_CQS(Corr-H).10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-AR_CQS(Corr-H).11 | The PS AC waveshape required shall be RHIC |
| P-HSR-PS-AR_CQS(Corr-H).12 | The peak waveshape di/dt during ramping shall be TBD |
| P-HSR-PS-AR_CQS(Corr-H).13 | The full power bandwidth required shall be TBD |
| P-HSR-PS-AR_CQS(Corr-H).14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-AR_CQS(Corr-H).15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-AR_CQS(Corr-H).16 | The short term stability shall be TBD A/s |
| P-HSR-PS-AR_CQS(Corr-H).17 | The long term stability shall be TBD A/s |
| P-HSR-PS-AR_CQS(Corr-H).18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-AR_CQS(Corr-H).19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-AR_CQS(Corr-H).20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-AR_CQS(Corr-H).21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-AR_CQS(Corr-H).22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-AR_CQS(Corr-H).23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-AR_CQS(Corr-H).24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-AR_CQS(Corr-H).25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-AR_CQS(Corr-H).26 | < blank > |
| P-HSR-PS-AR_CQS(Corr-H).27 | < blank > |
| P-HSR-PS-AR_CQS(Corr-H).28 | < blank > |
| P-HSR-PS-AR_CQS(Corr-H).29 | < blank > |
| P-HSR-PS-AR_CQS(Corr-H).30 | < blank > |
| P-HSR-PS-AR_CQS(Corr-H).31 | < blank > |
| P-HSR-PS-AR_CQS(Corr-H).32 | < blank > |
| P-HSR-PS-AR_CQS(Corr-H).33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-AR_CQS(Corr-H).34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-AR_CQS(Corr-H).35 | The terminal voltage shall be TBD V |
| P-HSR-PS-AR_CQS(Corr-H).36 | The design shall have thermal switches TBD |
| P-HSR-PS-AR_CQS(Corr-H).37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-AR_CQS(Corr-H).38 | The design shall have water flow switches TBD |
| P-HSR-PS-AR_CQS(Corr-H).39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-AR_CQS(Corr-H).40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-AR_CQS(Corr-H).41 | The main terminals lug details shall be TBD |
| P-HSR-PS-AR_CQS(Corr-H).42 | The lead end indications shall be TBD |
| P-HSR-PS-AR_CQS(Corr-H).43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-AR_CQS(Corr-H).44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-AR_CQS(Corr-H).45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-AR_CQS(Corr-H).46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-AR_CQS(Corr-H).47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-AR_CQS(Corr-HV).01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-AR_CQS(Corr-HV).02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-AR_CQS(Corr-HV).03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-AR_CQS(Corr-HV).04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-AR_CQS(Corr-HV).5 | < blank > |
| P-HSR-PS-AR_CQS(Corr-HV).06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-AR_CQS(Corr-HV).07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-AR_CQS(Corr-HV).08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_CQS(Corr-HV).09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_CQS(Corr-HV).10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-AR_CQS(Corr-HV).11 | < blank > |
| P-HSR-PS-AR_CQS(Corr-HV).12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-AR_CQS(Corr-HV).13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-AR_CQS(Corr-HV).14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-AR_CQS(Corr-HV).15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-AR_CQS(Corr-HV).16 | The short term stability shall be TBD A/s |
| P-HSR-PS-AR_CQS(Corr-HV).17 | The long term stability shall be TBD A/s |
| P-HSR-PS-AR_CQS(Corr-HV).18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-AR_CQS(Corr-HV).19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-AR_CQS(Corr-HV).20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-AR_CQS(Corr-HV).21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-AR_CQS(Corr-HV).22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-AR_CQS(Corr-HV).23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-AR_CQS(Corr-HV).24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-AR_CQS(Corr-HV).25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-AR_CQS(Corr-HV).26 | < blank > |
| P-HSR-PS-AR_CQS(Corr-HV).27 | < blank > |
| P-HSR-PS-AR_CQS(Corr-HV).28 | < blank > |
| P-HSR-PS-AR_CQS(Corr-HV).29 | < blank > |
| P-HSR-PS-AR_CQS(Corr-HV).30 | < blank > |
| P-HSR-PS-AR_CQS(Corr-HV).31 | < blank > |
| P-HSR-PS-AR_CQS(Corr-HV).32 | < blank > |
| P-HSR-PS-AR_CQS(Corr-HV).33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-AR_CQS(Corr-HV).34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-AR_CQS(Corr-HV).35 | The terminal voltage shall be TBD V |
| P-HSR-PS-AR_CQS(Corr-HV).36 | The design shall have thermal switches TBD |
| P-HSR-PS-AR_CQS(Corr-HV).37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-AR_CQS(Corr-HV).38 | The design shall have water flow switches TBD |
| P-HSR-PS-AR_CQS(Corr-HV).39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-AR_CQS(Corr-HV).40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-AR_CQS(Corr-HV).41 | The main terminals lug details shall be TBD |
| P-HSR-PS-AR_CQS(Corr-HV).42 | The lead end indications shall be TBD |
| P-HSR-PS-AR_CQS(Corr-HV).43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-AR_CQS(Corr-HV).44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-AR_CQS(Corr-HV).45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-AR_CQS(Corr-HV).46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-AR_CQS(Corr-HV).47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-AR_CQS(Corr-V).01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-AR_CQS(Corr-V).02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-AR_CQS(Corr-V).03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-AR_CQS(Corr-V).04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-AR_CQS(Corr-V).5 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-AR_CQS(Corr-V).07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-AR_CQS(Corr-V).08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_CQS(Corr-V).09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_CQS(Corr-V).10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-AR_CQS(Corr-V).11 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-AR_CQS(Corr-V).13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-AR_CQS(Corr-V).14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-AR_CQS(Corr-V).15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-AR_CQS(Corr-V).16 | The short term stability shall be TBD A/s |
| P-HSR-PS-AR_CQS(Corr-V).17 | The long term stability shall be TBD A/s |
| P-HSR-PS-AR_CQS(Corr-V).18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-AR_CQS(Corr-V).19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-AR_CQS(Corr-V).20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-AR_CQS(Corr-V).21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-AR_CQS(Corr-V).22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-AR_CQS(Corr-V).23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-AR_CQS(Corr-V).24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-AR_CQS(Corr-V).25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-AR_CQS(Corr-V).26 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).27 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).28 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).29 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).30 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).31 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).32 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).33 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).34 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).35 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).36 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).37 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).38 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).39 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).40 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).41 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).42 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).43 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).44 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).45 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).46 | < blank > |
| P-HSR-PS-AR_CQS(Corr-V).47 | < blank > |
| P-HSR-PS-AR_CQS(Quad).01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-AR_CQS(Quad).02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-AR_CQS(Quad).03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-AR_CQS(Quad).04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-AR_CQS(Quad).5 | < blank > |
| P-HSR-PS-AR_CQS(Quad).06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-AR_CQS(Quad).07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-AR_CQS(Quad).08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_CQS(Quad).09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_CQS(Quad).10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-AR_CQS(Quad).11 | < blank > |
| P-HSR-PS-AR_CQS(Quad).12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-AR_CQS(Quad).13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-AR_CQS(Quad).14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-AR_CQS(Quad).15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-AR_CQS(Quad).16 | The short term stability shall be TBD A/s |
| P-HSR-PS-AR_CQS(Quad).17 | The long term stability shall be TBD A/s |
| P-HSR-PS-AR_CQS(Quad).18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-AR_CQS(Quad).19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-AR_CQS(Quad).20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-AR_CQS(Quad).21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-AR_CQS(Quad).22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-AR_CQS(Quad).23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-AR_CQS(Quad).24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-AR_CQS(Quad).25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-AR_CQS(Quad).26 | < blank > |
| P-HSR-PS-AR_CQS(Quad).27 | < blank > |
| P-HSR-PS-AR_CQS(Quad).28 | < blank > |
| P-HSR-PS-AR_CQS(Quad).29 | < blank > |
| P-HSR-PS-AR_CQS(Quad).30 | < blank > |
| P-HSR-PS-AR_CQS(Quad).31 | < blank > |
| P-HSR-PS-AR_CQS(Quad).32 | < blank > |
| P-HSR-PS-AR_CQS(Quad).33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-AR_CQS(Quad).34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-AR_CQS(Quad).35 | The terminal voltage shall be TBD V |
| P-HSR-PS-AR_CQS(Quad).36 | The design shall have thermal switches TBD |
| P-HSR-PS-AR_CQS(Quad).37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-AR_CQS(Quad).38 | The design shall have water flow switches TBD |
| P-HSR-PS-AR_CQS(Quad).39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-AR_CQS(Quad).40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-AR_CQS(Quad).41 | The main terminals lug details shall be TBD |
| P-HSR-PS-AR_CQS(Quad).42 | The lead end indications shall be TBD |
| P-HSR-PS-AR_CQS(Quad).43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-AR_CQS(Quad).44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-AR_CQS(Quad).45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-AR_CQS(Quad).46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-AR_CQS(Quad).47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-AR_CQS(Sxt).01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-AR_CQS(Sxt).02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-AR_CQS(Sxt).03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-AR_CQS(Sxt).04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-AR_CQS(Sxt).5 | < blank > |
| P-HSR-PS-AR_CQS(Sxt).06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-AR_CQS(Sxt).07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-AR_CQS(Sxt).08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_CQS(Sxt).09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_CQS(Sxt).10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-AR_CQS(Sxt).11 | < blank > |
| P-HSR-PS-AR_CQS(Sxt).12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-AR_CQS(Sxt).13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-AR_CQS(Sxt).14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-AR_CQS(Sxt).15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-AR_CQS(Sxt).16 | The short term stability shall be TBD A/s |
| P-HSR-PS-AR_CQS(Sxt).17 | The long term stability shall be TBD A/s |
| P-HSR-PS-AR_CQS(Sxt).18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-AR_CQS(Sxt).19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-AR_CQS(Sxt).20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-AR_CQS(Sxt).21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-AR_CQS(Sxt).22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-AR_CQS(Sxt).23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-AR_CQS(Sxt).24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-AR_CQS(Sxt).25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-AR_CQS(Sxt).26 | < blank > |
| P-HSR-PS-AR_CQS(Sxt).27 | < blank > |
| P-HSR-PS-AR_CQS(Sxt).28 | < blank > |
| P-HSR-PS-AR_CQS(Sxt).29 | < blank > |
| P-HSR-PS-AR_CQS(Sxt).30 | < blank > |
| P-HSR-PS-AR_CQS(Sxt).31 | < blank > |
| P-HSR-PS-AR_CQS(Sxt).32 | < blank > |
| P-HSR-PS-AR_CQS(Sxt).33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-AR_CQS(Sxt).34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-AR_CQS(Sxt).35 | The terminal voltage shall be TBD V |
| P-HSR-PS-AR_CQS(Sxt).36 | The design shall have thermal switches TBD |
| P-HSR-PS-AR_CQS(Sxt).37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-AR_CQS(Sxt).38 | The design shall have water flow switches TBD |
| P-HSR-PS-AR_CQS(Sxt).39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-AR_CQS(Sxt).40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-AR_CQS(Sxt).41 | The main terminals lug details shall be TBD |
| P-HSR-PS-AR_CQS(Sxt).42 | The lead end indications shall be TBD |
| P-HSR-PS-AR_CQS(Sxt).43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-AR_CQS(Sxt).44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-AR_CQS(Sxt).45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-AR_CQS(Sxt).46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-AR_CQS(Sxt).47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-AR_D6.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-AR_D6.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-AR_D6.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-AR_D6.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-AR_D6.5 | < blank > |
| P-HSR-PS-AR_D6.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-AR_D6.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-AR_D6.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_D6.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_D6.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-AR_D6.11 | < blank > |
| P-HSR-PS-AR_D6.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-AR_D6.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-AR_D6.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-AR_D6.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-AR_D6.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-AR_D6.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-AR_D6.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-AR_D6.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-AR_D6.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-AR_D6.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-AR_D6.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-AR_D6.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-AR_D6.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-AR_D6.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-AR_D6.26 | < blank > |
| P-HSR-PS-AR_D6.27 | < blank > |
| P-HSR-PS-AR_D6.28 | < blank > |
| P-HSR-PS-AR_D6.29 | < blank > |
| P-HSR-PS-AR_D6.30 | < blank > |
| P-HSR-PS-AR_D6.31 | < blank > |
| P-HSR-PS-AR_D6.32 | < blank > |
| P-HSR-PS-AR_D6.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-AR_D6.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-AR_D6.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-AR_D6.36 | The design shall have thermal switches TBD |
| P-HSR-PS-AR_D6.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-AR_D6.38 | The design shall have water flow switches TBD |
| P-HSR-PS-AR_D6.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-AR_D6.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-AR_D6.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-AR_D6.42 | The lead end indications shall be TBD |
| P-HSR-PS-AR_D6.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-AR_D6.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-AR_D6.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-AR_D6.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-AR_D6.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-AR_D8.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-AR_D8.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-AR_D8.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-AR_D8.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-AR_D8.5 | < blank > |
| P-HSR-PS-AR_D8.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-AR_D8.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-AR_D8.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_D8.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_D8.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-AR_D8.11 | < blank > |
| P-HSR-PS-AR_D8.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-AR_D8.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-AR_D8.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-AR_D8.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-AR_D8.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-AR_D8.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-AR_D8.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-AR_D8.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-AR_D8.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-AR_D8.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-AR_D8.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-AR_D8.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-AR_D8.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-AR_D8.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-AR_D8.26 | < blank > |
| P-HSR-PS-AR_D8.27 | < blank > |
| P-HSR-PS-AR_D8.28 | < blank > |
| P-HSR-PS-AR_D8.29 | < blank > |
| P-HSR-PS-AR_D8.30 | < blank > |
| P-HSR-PS-AR_D8.31 | < blank > |
| P-HSR-PS-AR_D8.32 | < blank > |
| P-HSR-PS-AR_D8.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-AR_D8.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-AR_D8.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-AR_D8.36 | The design shall have thermal switches TBD |
| P-HSR-PS-AR_D8.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-AR_D8.38 | The design shall have water flow switches TBD |
| P-HSR-PS-AR_D8.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-AR_D8.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-AR_D8.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-AR_D8.42 | The lead end indications shall be TBD |
| P-HSR-PS-AR_D8.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-AR_D8.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-AR_D8.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-AR_D8.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-AR_D8.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-AR_D9.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-AR_D9.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-AR_D9.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-AR_D9.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-AR_D9.5 | < blank > |
| P-HSR-PS-AR_D9.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-AR_D9.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-AR_D9.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_D9.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-AR_D9.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-AR_D9.11 | < blank > |
| P-HSR-PS-AR_D9.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-AR_D9.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-AR_D9.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-AR_D9.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-AR_D9.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-AR_D9.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-AR_D9.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-AR_D9.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-AR_D9.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-AR_D9.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-AR_D9.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-AR_D9.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-AR_D9.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-AR_D9.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-AR_D9.26 | < blank > |
| P-HSR-PS-AR_D9.27 | < blank > |
| P-HSR-PS-AR_D9.28 | < blank > |
| P-HSR-PS-AR_D9.29 | < blank > |
| P-HSR-PS-AR_D9.30 | < blank > |
| P-HSR-PS-AR_D9.31 | < blank > |
| P-HSR-PS-AR_D9.32 | < blank > |
| P-HSR-PS-AR_D9.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-AR_D9.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-AR_D9.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-AR_D9.36 | The design shall have thermal switches TBD |
| P-HSR-PS-AR_D9.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-AR_D9.38 | The design shall have water flow switches TBD |
| P-HSR-PS-AR_D9.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-AR_D9.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-AR_D9.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-AR_D9.42 | The lead end indications shall be TBD |
| P-HSR-PS-AR_D9.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-AR_D9.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-AR_D9.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-AR_D9.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-AR_D9.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-B1PR.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-B1PR.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-B1PR.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-B1PR.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-B1PR.5 | < blank > |
| P-HSR-PS-B1PR.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-B1PR.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-B1PR.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-B1PR.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-B1PR.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-B1PR.11 | < blank > |
| P-HSR-PS-B1PR.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-B1PR.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-B1PR.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-B1PR.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-B1PR.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-B1PR.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-B1PR.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-B1PR.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-B1PR.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-B1PR.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-B1PR.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-B1PR.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-B1PR.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-B1PR.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-B1PR.26 | < blank > |
| P-HSR-PS-B1PR.27 | < blank > |
| P-HSR-PS-B1PR.28 | < blank > |
| P-HSR-PS-B1PR.29 | < blank > |
| P-HSR-PS-B1PR.30 | < blank > |
| P-HSR-PS-B1PR.31 | < blank > |
| P-HSR-PS-B1PR.32 | < blank > |
| P-HSR-PS-B1PR.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-B1PR.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-B1PR.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-B1PR.36 | The design shall have thermal switches TBD |
| P-HSR-PS-B1PR.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-B1PR.38 | The design shall have water flow switches TBD |
| P-HSR-PS-B1PR.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-B1PR.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-B1PR.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-B1PR.42 | The lead end indications shall be TBD |
| P-HSR-PS-B1PR.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-B1PR.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-B1PR.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-B1PR.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-B1PR.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-BXDS01A.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-BXDS01A.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-BXDS01A.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-BXDS01A.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-BXDS01A.5 | < blank > |
| P-HSR-PS-BXDS01A.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-BXDS01A.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-BXDS01A.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-BXDS01A.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-BXDS01A.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-BXDS01A.11 | < blank > |
| P-HSR-PS-BXDS01A.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-BXDS01A.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-BXDS01A.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-BXDS01A.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-BXDS01A.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-BXDS01A.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-BXDS01A.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-BXDS01A.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-BXDS01A.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-BXDS01A.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-BXDS01A.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-BXDS01A.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-BXDS01A.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-BXDS01A.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-BXDS01A.26 | < blank > |
| P-HSR-PS-BXDS01A.27 | < blank > |
| P-HSR-PS-BXDS01A.28 | < blank > |
| P-HSR-PS-BXDS01A.29 | < blank > |
| P-HSR-PS-BXDS01A.30 | < blank > |
| P-HSR-PS-BXDS01A.31 | < blank > |
| P-HSR-PS-BXDS01A.32 | < blank > |
| P-HSR-PS-BXDS01A.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-BXDS01A.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-BXDS01A.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-BXDS01A.36 | The design shall have thermal switches TBD |
| P-HSR-PS-BXDS01A.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-BXDS01A.38 | The design shall have water flow switches TBD |
| P-HSR-PS-BXDS01A.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-BXDS01A.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-BXDS01A.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-BXDS01A.42 | The lead end indications shall be TBD |
| P-HSR-PS-BXDS01A.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-BXDS01A.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-BXDS01A.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-BXDS01A.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-BXDS01A.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-CORR_0.05m.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-CORR_0.05m.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-CORR_0.05m.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-CORR_0.05m.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-CORR_0.5m.5 | < blank > |
| P-HSR-PS-CORR_0.05m.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-CORR_0.05m.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-CORR_0.05m.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-CORR_0.05m.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-CORR_0.5m.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-CORR_0.5m.11 | < blank > |
| P-HSR-PS-CORR_0.5m.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-CORR_0.5m.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-CORR_0.5m.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-CORR_0.5m.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-CORR_0.5m.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-CORR_0.5m.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-CORR_0.5m.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-CORR_0.5m.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-CORR_0.5m.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-CORR_0.5m.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-CORR_0.5m.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-CORR_0.5m.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-CORR_0.5m.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-CORR_0.5m.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-CORR_0.5m.26 | < blank > |
| P-HSR-PS-CORR_0.5m.27 | < blank > |
| P-HSR-PS-CORR_0.5m.28 | < blank > |
| P-HSR-PS-CORR_0.5m.29 | < blank > |
| P-HSR-PS-CORR_0.5m.30 | < blank > |
| P-HSR-PS-CORR_0.5m.31 | < blank > |
| P-HSR-PS-CORR_0.5m.32 | < blank > |
| P-HSR-PS-CORR_0.5m.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-CORR_0.5m.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-CORR_0.5m.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-CORR_0.5m.36 | The design shall have thermal switches TBD |
| P-HSR-PS-CORR_0.5m.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-CORR_0.5m.38 | The design shall have water flow switches TBD |
| P-HSR-PS-CORR_0.5m.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-CORR_0.5m.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-CORR_0.5m.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-CORR_0.5m.42 | The lead end indications shall be TBD |
| P-HSR-PS-CORR_0.5m.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-CORR_0.5m.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-CORR_0.5m.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-CORR_0.5m.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-CORR_0.5m.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-CQS(Sxt).01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-CQS(Sxt).02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-CQS(Sxt).03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-CQS(Sxt).04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-CQS(Sxt).5 | < blank > |
| P-HSR-PS-CQS(Sxt).06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-CQS(Sxt).07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-CQS(Sxt).08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-CQS(Sxt).09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-CQS(Sxt).10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-CQS(Sxt).11 | < blank > |
| P-HSR-PS-CQS(Sxt).12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-CQS(Sxt).13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-CQS(Sxt).14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-CQS(Sxt).15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-CQS(Sxt).16 | The short term stability shall be TBD A/s |
| P-HSR-PS-CQS(Sxt).17 | The long term stability shall be TBD A/s |
| P-HSR-PS-CQS(Sxt).18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-CQS(Sxt).19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-CQS(Sxt).20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-CQS(Sxt).21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-CQS(Sxt).22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-CQS(Sxt).23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-CQS(Sxt).24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-CQS(Sxt).25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-CQS(Sxt).26 | < blank > |
| P-HSR-PS-CQS(Sxt).27 | < blank > |
| P-HSR-PS-CQS(Sxt).28 | < blank > |
| P-HSR-PS-CQS(Sxt).29 | < blank > |
| P-HSR-PS-CQS(Sxt).30 | < blank > |
| P-HSR-PS-CQS(Sxt).31 | < blank > |
| P-HSR-PS-CQS(Sxt).32 | < blank > |
| P-HSR-PS-CQS(Sxt).33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-CQS(Sxt).34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-CQS(Sxt).35 | The terminal voltage shall be TBD V |
| P-HSR-PS-CQS(Sxt).36 | The design shall have thermal switches TBD |
| P-HSR-PS-CQS(Sxt).37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-CQS(Sxt).38 | The design shall have water flow switches TBD |
| P-HSR-PS-CQS(Sxt).39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-CQS(Sxt).40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-CQS(Sxt).41 | The main terminals lug details shall be TBD |
| P-HSR-PS-CQS(Sxt).42 | The lead end indications shall be TBD |
| P-HSR-PS-CQS(Sxt).43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-CQS(Sxt).44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-CQS(Sxt).45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-CQS(Sxt).46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-CQS(Sxt).47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-D5I.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-D5I.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-D5I.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-D5I.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-D5I.5 | < blank > |
| P-HSR-PS-D5I.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-D5I.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-D5I.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D5I.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D5I.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-D5I.11 | < blank > |
| P-HSR-PS-D5I.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-D5I.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-D5I.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-D5I.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-D5I.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-D5I.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-D5I.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-D5I.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-D5I.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-D5I.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-D5I.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-D5I.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-D5I.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-D5I.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-D5I.26 | < blank > |
| P-HSR-PS-D5I.27 | < blank > |
| P-HSR-PS-D5I.28 | < blank > |
| P-HSR-PS-D5I.29 | < blank > |
| P-HSR-PS-D5I.30 | < blank > |
| P-HSR-PS-D5I.31 | < blank > |
| P-HSR-PS-D5I.32 | < blank > |
| P-HSR-PS-D5I.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-D5I.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5I.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-D5I.36 | The design shall have thermal switches TBD |
| P-HSR-PS-D5I.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-D5I.38 | The design shall have water flow switches TBD |
| P-HSR-PS-D5I.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-D5I.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-D5I.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-D5I.42 | The lead end indications shall be TBD |
| P-HSR-PS-D5I.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-D5I.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-D5I.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-D5I.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-D5I.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-D5O.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-D5O.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-D5O.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-D5O.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-D5O.5 | < blank > |
| P-HSR-PS-D5O.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-D5O.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-D5O.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D5O.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D5O.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-D5O.11 | < blank > |
| P-HSR-PS-D5O.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-D5O.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-D5O.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-D5O.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-D5O.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-D5O.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-D5O.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-D5O.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-D5O.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-D5O.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-D5O.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-D5O.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-D5O.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-D5O.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-D5O.26 | < blank > |
| P-HSR-PS-D5O.27 | < blank > |
| P-HSR-PS-D5O.28 | < blank > |
| P-HSR-PS-D5O.29 | < blank > |
| P-HSR-PS-D5O.30 | < blank > |
| P-HSR-PS-D5O.31 | < blank > |
| P-HSR-PS-D5O.32 | < blank > |
| P-HSR-PS-D5O.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-D5O.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O.35 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O.36 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O.37 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O.38 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O.39 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O.40 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O.41 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O.42 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O.43 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O.44 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O.45 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O.46 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O.47 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O_D5I.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-D5O_D5I.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-D5O_D5I.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-D5O_D5I.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-D5O_D5I.5 | < blank > |
| P-HSR-PS-D5O_D5I.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-D5O_D5I.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-D5O_D5I.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D5O_D5I.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D5O_D5I.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-D5O_D5I.11 | < blank > |
| P-HSR-PS-D5O_D5I.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-D5O_D5I.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-D5O_D5I.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-D5O_D5I.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-D5O_D5I.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-D5O_D5I.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-D5O_D5I.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-D5O_D5I.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-D5O_D5I.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-D5O_D5I.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-D5O_D5I.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-D5O_D5I.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-D5O_D5I.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-D5O_D5I.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-D5O_D5I.26 | < blank > |
| P-HSR-PS-D5O_D5I.27 | < blank > |
| P-HSR-PS-D5O_D5I.28 | < blank > |
| P-HSR-PS-D5O_D5I.29 | < blank > |
| P-HSR-PS-D5O_D5I.30 | < blank > |
| P-HSR-PS-D5O_D5I.31 | < blank > |
| P-HSR-PS-D5O_D5I.32 | < blank > |
| P-HSR-PS-D5O_D5I.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-D5O_D5I.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D5O_D5I.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-D5O_D5I.36 | The design shall have thermal switches TBD |
| P-HSR-PS-D5O_D5I.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-D5O_D5I.38 | The design shall have water flow switches TBD |
| P-HSR-PS-D5O_D5I.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-D5O_D5I.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-D5O_D5I.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-D5O_D5I.42 | The lead end indications shall be TBD |
| P-HSR-PS-D5O_D5I.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-D5O_D5I.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-D5O_D5I.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-D5O_D5I.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-D5O_D5I.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-D6.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-D6.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-D6.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-D6.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-D6.5 | < blank > |
| P-HSR-PS-D6.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-D6.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-D6.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D6.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D6.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-D6.11 | < blank > |
| P-HSR-PS-D6.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-D6.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-D6.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-D6.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-D6.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-D6.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-D6.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-D6.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-D6.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-D6.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-D6.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-D6.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-D6.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-D6.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-D6.26 | < blank > |
| P-HSR-PS-D6.27 | < blank > |
| P-HSR-PS-D6.28 | < blank > |
| P-HSR-PS-D6.29 | < blank > |
| P-HSR-PS-D6.30 | < blank > |
| P-HSR-PS-D6.31 | < blank > |
| P-HSR-PS-D6.32 | < blank > |
| P-HSR-PS-D6.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-D6.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D6.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-D6.36 | The design shall have thermal switches TBD |
| P-HSR-PS-D6.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-D6.38 | The design shall have water flow switches TBD |
| P-HSR-PS-D6.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-D6.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-D6.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-D6.42 | The lead end indications shall be TBD |
| P-HSR-PS-D6.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-D6.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-D6.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-D6.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-D6.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-D8.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-D8.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-D8.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-D8.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-D8.5 | < blank > |
| P-HSR-PS-D8.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-D8.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-D8.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D8.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D8.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-D8.11 | < blank > |
| P-HSR-PS-D8.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-D8.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-D8.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-D8.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-D8.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-D8.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-D8.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-D8.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-D8.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-D8.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-D8.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-D8.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-D8.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-D8.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-D8.26 | < blank > |
| P-HSR-PS-D8.27 | < blank > |
| P-HSR-PS-D8.28 | < blank > |
| P-HSR-PS-D8.29 | < blank > |
| P-HSR-PS-D8.30 | < blank > |
| P-HSR-PS-D8.31 | < blank > |
| P-HSR-PS-D8.32 | < blank > |
| P-HSR-PS-D8.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-D8.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D8.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-D8.36 | The design shall have thermal switches TBD |
| P-HSR-PS-D8.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-D8.38 | The design shall have water flow switches TBD |
| P-HSR-PS-D8.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-D8.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-D8.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-D8.42 | The lead end indications shall be TBD |
| P-HSR-PS-D8.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-D8.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-D8.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-D8.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-D8.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-D8_IR02.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-D8_IR02.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-D8_IR02.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-D8_IR02.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-D8_IR02.5 | < blank > |
| P-HSR-PS-D8_IR02.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-D8_IR02.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-D8_IR02.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D8_IR02.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D8_IR02.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-D8_IR02.11 | < blank > |
| P-HSR-PS-D8_IR02.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-D8_IR02.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-D8_IR02.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-D8_IR02.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-D8_IR02.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-D8_IR02.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-D8_IR02.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-D8_IR02.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-D8_IR02.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-D8_IR02.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-D8_IR02.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-D8_IR02.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-D8_IR02.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-D8_IR02.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-D8_IR02.26 | < blank > |
| P-HSR-PS-D8_IR02.27 | < blank > |
| P-HSR-PS-D8_IR02.28 | < blank > |
| P-HSR-PS-D8_IR02.29 | < blank > |
| P-HSR-PS-D8_IR02.30 | < blank > |
| P-HSR-PS-D8_IR02.31 | < blank > |
| P-HSR-PS-D8_IR02.32 | < blank > |
| P-HSR-PS-D8_IR02.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-D8_IR02.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D8_IR02.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-D8_IR02.36 | The design shall have thermal switches TBD |
| P-HSR-PS-D8_IR02.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-D8_IR02.38 | The design shall have water flow switches TBD |
| P-HSR-PS-D8_IR02.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-D8_IR02.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-D8_IR02.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-D8_IR02.42 | The lead end indications shall be TBD |
| P-HSR-PS-D8_IR02.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-D8_IR02.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-D8_IR02.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-D8_IR02.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-D8_IR02.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-D8_IR06.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-D8_IR06.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-D8_IR06.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-D8_IR06.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-D8_IR06.5 | < blank > |
| P-HSR-PS-D8_IR06.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-D8_IR06.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-D8_IR06.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D8_IR06.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D8_IR06.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-D8_IR06.11 | < blank > |
| P-HSR-PS-D8_IR06.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-D8_IR06.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-D8_IR06.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-D8_IR06.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-D8_IR06.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-D8_IR06.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-D8_IR06.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-D8_IR06.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-D8_IR06.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-D8_IR06.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-D8_IR06.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-D8_IR06.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-D8_IR06.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-D8_IR06.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-D8_IR06.26 | < blank > |
| P-HSR-PS-D8_IR06.27 | < blank > |
| P-HSR-PS-D8_IR06.28 | < blank > |
| P-HSR-PS-D8_IR06.29 | < blank > |
| P-HSR-PS-D8_IR06.30 | < blank > |
| P-HSR-PS-D8_IR06.31 | < blank > |
| P-HSR-PS-D8_IR06.32 | < blank > |
| P-HSR-PS-D8_IR06.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-D8_IR06.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D8_IR06.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-D8_IR06.36 | The design shall have thermal switches TBD |
| P-HSR-PS-D8_IR06.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-D8_IR06.38 | The design shall have water flow switches TBD |
| P-HSR-PS-D8_IR06.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-D8_IR06.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-D8_IR06.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-D8_IR06.42 | The lead end indications shall be TBD |
| P-HSR-PS-D8_IR06.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-D8_IR06.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-D8_IR06.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-D8_IR06.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-D8_IR06.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-D9.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-D9.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-D9.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-D9.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-D9.5 | < blank > |
| P-HSR-PS-D9.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-D9.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-D9.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D9.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-D9.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-D9.11 | < blank > |
| P-HSR-PS-D9.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-D9.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-D9.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-D9.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-D9.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-D9.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-D9.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-D9.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-D9.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-D9.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-D9.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-D9.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-D9.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-D9.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-D9.26 | < blank > |
| P-HSR-PS-D9.27 | < blank > |
| P-HSR-PS-D9.28 | < blank > |
| P-HSR-PS-D9.29 | < blank > |
| P-HSR-PS-D9.30 | < blank > |
| P-HSR-PS-D9.31 | < blank > |
| P-HSR-PS-D9.32 | < blank > |
| P-HSR-PS-D9.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-D9.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-D9.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-D9.36 | The design shall have thermal switches TBD |
| P-HSR-PS-D9.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-D9.38 | The design shall have water flow switches TBD |
| P-HSR-PS-D9.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-D9.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-D9.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-D9.42 | The lead end indications shall be TBD |
| P-HSR-PS-D9.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-D9.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-D9.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-D9.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-D9.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-H5_QS3.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-H5_QS3.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-H5_QS3.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-H5_QS3.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-H5_QS3.5 | < blank > |
| P-HSR-PS-H5_QS3.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-H5_QS3.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-H5_QS3.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-H5_QS3.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-H5_QS3.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-H5_QS3.11 | < blank > |
| P-HSR-PS-H5_QS3.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-H5_QS3.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-H5_QS3.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-H5_QS3.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-H5_QS3.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-H5_QS3.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-H5_QS3.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-H5_QS3.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-H5_QS3.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-H5_QS3.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-H5_QS3.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-H5_QS3.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-H5_QS3.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-H5_QS3.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-H5_QS3.26 | < blank > |
| P-HSR-PS-H5_QS3.27 | < blank > |
| P-HSR-PS-H5_QS3.28 | < blank > |
| P-HSR-PS-H5_QS3.29 | < blank > |
| P-HSR-PS-H5_QS3.30 | < blank > |
| P-HSR-PS-H5_QS3.31 | < blank > |
| P-HSR-PS-H5_QS3.32 | < blank > |
| P-HSR-PS-H5_QS3.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-H5_QS3.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-H5_QS3.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-H5_QS3.36 | The design shall have thermal switches TBD |
| P-HSR-PS-H5_QS3.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-H5_QS3.38 | The design shall have water flow switches TBD |
| P-HSR-PS-H5_QS3.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-H5_QS3.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-H5_QS3.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-H5_QS3.42 | The lead end indications shall be TBD |
| P-HSR-PS-H5_QS3.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-H5_QS3.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-H5_QS3.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-H5_QS3.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-H5_QS3.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-IR_Q5.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-IR_Q5.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-IR_Q5.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-IR_Q5.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-IR_Q5.5 | < blank > |
| P-HSR-PS-IR_Q5.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-IR_Q5.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-IR_Q5.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-IR_Q5.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-IR_Q5.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-IR_Q5.11 | < blank > |
| P-HSR-PS-IR_Q5.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-IR_Q5.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-IR_Q5.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-IR_Q5.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-IR_Q5.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-IR_Q5.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-IR_Q5.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-IR_Q5.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-IR_Q5.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-IR_Q5.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-IR_Q5.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-IR_Q5.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-IR_Q5.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-IR_Q5.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-IR_Q5.26 | < blank > |
| P-HSR-PS-IR_Q5.27 | < blank > |
| P-HSR-PS-IR_Q5.28 | < blank > |
| P-HSR-PS-IR_Q5.29 | < blank > |
| P-HSR-PS-IR_Q5.30 | < blank > |
| P-HSR-PS-IR_Q5.31 | < blank > |
| P-HSR-PS-IR_Q5.32 | < blank > |
| P-HSR-PS-IR_Q5.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-IR_Q5.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-IR_Q5.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-IR_Q5.36 | The design shall have thermal switches TBD |
| P-HSR-PS-IR_Q5.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-IR_Q5.38 | The design shall have water flow switches TBD |
| P-HSR-PS-IR_Q5.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-IR_Q5.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-IR_Q5.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-IR_Q5.42 | The lead end indications shall be TBD |
| P-HSR-PS-IR_Q5.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-IR_Q5.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-IR_Q5.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-IR_Q5.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-IR_Q5.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-IR_Q6.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-IR_Q6.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-IR_Q6.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-IR_Q6.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-IR_Q6.5 | < blank > |
| P-HSR-PS-IR_Q6.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-IR_Q6.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-IR_Q6.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-IR_Q6.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-IR_Q6.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-IR_Q6.11 | < blank > |
| P-HSR-PS-IR_Q6.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-IR_Q6.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-IR_Q6.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-IR_Q6.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-IR_Q6.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-IR_Q6.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-IR_Q6.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-IR_Q6.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-IR_Q6.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-IR_Q6.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-IR_Q6.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-IR_Q6.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-IR_Q6.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-IR_Q6.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-IR_Q6.26 | < blank > |
| P-HSR-PS-IR_Q6.27 | < blank > |
| P-HSR-PS-IR_Q6.28 | < blank > |
| P-HSR-PS-IR_Q6.29 | < blank > |
| P-HSR-PS-IR_Q6.30 | < blank > |
| P-HSR-PS-IR_Q6.31 | < blank > |
| P-HSR-PS-IR_Q6.32 | < blank > |
| P-HSR-PS-IR_Q6.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-IR_Q6.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-IR_Q6.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-IR_Q6.36 | The design shall have thermal switches TBD |
| P-HSR-PS-IR_Q6.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-IR_Q6.38 | The design shall have water flow switches TBD |
| P-HSR-PS-IR_Q6.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-IR_Q6.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-IR_Q6.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-IR_Q6.42 | The lead end indications shall be TBD |
| P-HSR-PS-IR_Q6.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-IR_Q6.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-IR_Q6.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-IR_Q6.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-IR_Q6.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-IR_Q8.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-IR_Q8.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-IR_Q8.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-IR_Q8.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-IR_Q8.5 | < blank > |
| P-HSR-PS-IR_Q8.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-IR_Q8.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-IR_Q8.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-IR_Q8.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-IR_Q8.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-IR_Q8.11 | < blank > |
| P-HSR-PS-IR_Q8.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-IR_Q8.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-IR_Q8.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-IR_Q8.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-IR_Q8.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-IR_Q8.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-IR_Q8.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-IR_Q8.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-IR_Q8.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-IR_Q8.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-IR_Q8.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-IR_Q8.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-IR_Q8.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-IR_Q8.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-IR_Q8.26 | < blank > |
| P-HSR-PS-IR_Q8.27 | < blank > |
| P-HSR-PS-IR_Q8.28 | < blank > |
| P-HSR-PS-IR_Q8.29 | < blank > |
| P-HSR-PS-IR_Q8.30 | < blank > |
| P-HSR-PS-IR_Q8.31 | < blank > |
| P-HSR-PS-IR_Q8.32 | < blank > |
| P-HSR-PS-IR_Q8.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-IR_Q8.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-IR_Q8.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-IR_Q8.36 | The design shall have thermal switches TBD |
| P-HSR-PS-IR_Q8.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-IR_Q8.38 | The design shall have water flow switches TBD |
| P-HSR-PS-IR_Q8.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-IR_Q8.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-IR_Q8.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-IR_Q8.42 | The lead end indications shall be TBD |
| P-HSR-PS-IR_Q8.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-IR_Q8.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-IR_Q8.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-IR_Q8.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-IR_Q8.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-IR_Q9.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-IR_Q9.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-IR_Q9.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-IR_Q9.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-IR_Q9.5 | < blank > |
| P-HSR-PS-IR_Q9.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-IR_Q9.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-IR_Q9.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-IR_Q9.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-IR_Q9.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-IR_Q9.11 | < blank > |
| P-HSR-PS-IR_Q9.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-IR_Q9.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-IR_Q9.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-IR_Q9.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-IR_Q9.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-IR_Q9.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-IR_Q9.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-IR_Q9.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-IR_Q9.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-IR_Q9.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-IR_Q9.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-IR_Q9.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-IR_Q9.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-IR_Q9.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-IR_Q9.26 | < blank > |
| P-HSR-PS-IR_Q9.27 | < blank > |
| P-HSR-PS-IR_Q9.28 | < blank > |
| P-HSR-PS-IR_Q9.29 | < blank > |
| P-HSR-PS-IR_Q9.30 | < blank > |
| P-HSR-PS-IR_Q9.31 | < blank > |
| P-HSR-PS-IR_Q9.32 | < blank > |
| P-HSR-PS-IR_Q9.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-IR_Q9.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-IR_Q9.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-IR_Q9.36 | The design shall have thermal switches TBD |
| P-HSR-PS-IR_Q9.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-IR_Q9.38 | The design shall have water flow switches TBD |
| P-HSR-PS-IR_Q9.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-IR_Q9.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-IR_Q9.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-IR_Q9.42 | The lead end indications shall be TBD |
| P-HSR-PS-IR_Q9.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-IR_Q9.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-IR_Q9.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-IR_Q9.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-IR_Q9.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-IR_VKICKER_0.25.1 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-IR_VKICKER_0.25.2 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-IR_VKICKER_0.25.3 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-IR_VKICKER_0.25.4 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-IR_VKICKER_0.25.5 | < blank > |
| P-HSR-PS-IR_VKICKER_0.25.6 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-IR_VKICKER_0.25.7 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-IR_VKICKER_0.25.8 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-IR_VKICKER_0.25.9 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-IR_VKICKER_0.25.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-IR_VKICKER_0.25.11 | < blank > |
| P-HSR-PS-IR_VKICKER_0.25.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-IR_VKICKER_0.25.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-IR_VKICKER_0.25.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-IR_VKICKER_0.25.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-IR_VKICKER_0.25.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-IR_VKICKER_0.25.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-IR_VKICKER_0.25.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-IR_VKICKER_0.25.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-IR_VKICKER_0.25.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-IR_VKICKER_0.25.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-IR_VKICKER_0.25.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-IR_VKICKER_0.25.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-IR_VKICKER_0.25.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-IR_VKICKER_0.25.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-IR_VKICKER_0.25.26 | < blank > |
| P-HSR-PS-IR_VKICKER_0.25.27 | < blank > |
| P-HSR-PS-IR_VKICKER_0.25.28 | < blank > |
| P-HSR-PS-IR_VKICKER_0.25.29 | < blank > |
| P-HSR-PS-IR_VKICKER_0.25.30 | < blank > |
| P-HSR-PS-IR_VKICKER_0.25.31 | < blank > |
| P-HSR-PS-IR_VKICKER_0.25.32 | < blank > |
| P-HSR-PS-IR_VKICKER_0.25.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-IR_VKICKER_0.25.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-IR_VKICKER_0.25.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-IR_VKICKER_0.25.36 | The design shall have thermal switches TBD |
| P-HSR-PS-IR_VKICKER_0.25.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-IR_VKICKER_0.25.38 | The design shall have water flow switches TBD |
| P-HSR-PS-IR_VKICKER_0.25.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-IR_VKICKER_0.25.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-IR_VKICKER_0.25.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-IR_VKICKER_0.25.42 | The lead end indications shall be TBD |
| P-HSR-PS-IR_VKICKER_0.25.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-IR_VKICKER_0.25.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-IR_VKICKER_0.25.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-IR_VKICKER_0.25.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-IR_VKICKER_0.25.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-KA3.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-KA3.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-KA3.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-KA3.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-KA3.5 | < blank > |
| P-HSR-PS-KA3.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-KA3.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-KA3.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-KA3.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-KA3.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-KA3.11 | < blank > |
| P-HSR-PS-KA3.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-KA3.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-KA3.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-KA3.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-KA3.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-KA3.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-KA3.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-KA3.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-KA3.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-KA3.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-KA3.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-KA3.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-KA3.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-KA3.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-KA3.26 | < blank > |
| P-HSR-PS-KA3.27 | < blank > |
| P-HSR-PS-KA3.28 | < blank > |
| P-HSR-PS-KA3.29 | < blank > |
| P-HSR-PS-KA3.30 | < blank > |
| P-HSR-PS-KA3.31 | < blank > |
| P-HSR-PS-KA3.32 | < blank > |
| P-HSR-PS-KA3.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-KA3.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-KA3.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-KA3.36 | The design shall have thermal switches TBD |
| P-HSR-PS-KA3.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-KA3.38 | The design shall have water flow switches TBD |
| P-HSR-PS-KA3.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-KA3.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-KA3.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-KA3.42 | The lead end indications shall be TBD |
| P-HSR-PS-KA3.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-KA3.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-KA3.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-KA3.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-KA3.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-Q1.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-Q1.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-Q1.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-Q1.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-Q1.5 | < blank > |
| P-HSR-PS-Q1.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-Q1.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-Q1.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q1.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q1.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-Q1.11 | < blank > |
| P-HSR-PS-Q1.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-Q1.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-Q1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-Q1.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-Q1.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-Q1.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-Q1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-Q1.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-Q1.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-Q1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-Q1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-Q1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-Q1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-Q1.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-Q1.26 | < blank > |
| P-HSR-PS-Q1.27 | < blank > |
| P-HSR-PS-Q1.28 | < blank > |
| P-HSR-PS-Q1.29 | < blank > |
| P-HSR-PS-Q1.30 | < blank > |
| P-HSR-PS-Q1.31 | < blank > |
| P-HSR-PS-Q1.32 | < blank > |
| P-HSR-PS-Q1.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-Q1.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-Q1.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-Q1.36 | The design shall have thermal switches TBD |
| P-HSR-PS-Q1.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-Q1.38 | The design shall have water flow switches TBD |
| P-HSR-PS-Q1.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-Q1.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-Q1.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-Q1.42 | The lead end indications shall be TBD |
| P-HSR-PS-Q1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-Q1.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-Q1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-Q1.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-Q1.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-Q2.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-Q2.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-Q2.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-Q2.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-Q2.5 | < blank > |
| P-HSR-PS-Q2.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-Q2.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-Q2.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q2.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q2.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-Q2.11 | < blank > |
| P-HSR-PS-Q2.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-Q2.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-Q2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-Q2.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-Q2.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-Q2.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-Q2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-Q2.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-Q2.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-Q2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-Q2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-Q2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-Q2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-Q2.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-Q2.26 | < blank > |
| P-HSR-PS-Q2.27 | < blank > |
| P-HSR-PS-Q2.28 | < blank > |
| P-HSR-PS-Q2.29 | < blank > |
| P-HSR-PS-Q2.30 | < blank > |
| P-HSR-PS-Q2.31 | < blank > |
| P-HSR-PS-Q2.32 | < blank > |
| P-HSR-PS-Q2.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-Q2.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-Q2.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-Q2.36 | The design shall have thermal switches TBD |
| P-HSR-PS-Q2.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-Q2.38 | The design shall have water flow switches TBD |
| P-HSR-PS-Q2.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-Q2.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-Q2.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-Q2.42 | The lead end indications shall be TBD |
| P-HSR-PS-Q2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-Q2.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-Q2.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-Q2.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-Q2.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-Q3.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-Q3.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-Q3.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-Q3.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-Q3.5 | < blank > |
| P-HSR-PS-Q3.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-Q3.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-Q3.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q3.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q3.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-Q3.11 | < blank > |
| P-HSR-PS-Q3.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-Q3.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-Q3.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-Q3.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-Q3.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-Q3.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-Q3.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-Q3.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-Q3.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-Q3.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-Q3.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-Q3.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-Q3.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-Q3.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-Q3.26 | < blank > |
| P-HSR-PS-Q3.27 | < blank > |
| P-HSR-PS-Q3.28 | < blank > |
| P-HSR-PS-Q3.29 | < blank > |
| P-HSR-PS-Q3.30 | < blank > |
| P-HSR-PS-Q3.31 | < blank > |
| P-HSR-PS-Q3.32 | < blank > |
| P-HSR-PS-Q3.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-Q3.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-Q3.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-Q3.36 | The design shall have thermal switches TBD |
| P-HSR-PS-Q3.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-Q3.38 | The design shall have water flow switches TBD |
| P-HSR-PS-Q3.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-Q3.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-Q3.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-Q3.42 | The lead end indications shall be TBD |
| P-HSR-PS-Q3.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-Q3.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-Q3.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-Q3.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-Q3.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-Q3PR.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-Q3PR.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-Q3PR.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-Q3PR.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-Q3PR.5 | < blank > |
| P-HSR-PS-Q3PR.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-Q3PR.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-Q3PR.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q3PR.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q3PR.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-Q3PR.11 | < blank > |
| P-HSR-PS-Q3PR.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-Q3PR.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-Q3PR.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-Q3PR.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-Q3PR.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-Q3PR.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-Q3PR.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-Q3PR.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-Q3PR.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-Q3PR.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-Q3PR.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-Q3PR.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-Q3PR.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-Q3PR.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-Q3PR.26 | < blank > |
| P-HSR-PS-Q3PR.27 | < blank > |
| P-HSR-PS-Q3PR.28 | < blank > |
| P-HSR-PS-Q3PR.29 | < blank > |
| P-HSR-PS-Q3PR.30 | < blank > |
| P-HSR-PS-Q3PR.31 | < blank > |
| P-HSR-PS-Q3PR.32 | < blank > |
| P-HSR-PS-Q3PR.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-Q3PR.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-Q3PR.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-Q3PR.36 | The design shall have thermal switches TBD |
| P-HSR-PS-Q3PR.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-Q3PR.38 | The design shall have water flow switches TBD |
| P-HSR-PS-Q3PR.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-Q3PR.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-Q3PR.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-Q3PR.42 | The lead end indications shall be TBD |
| P-HSR-PS-Q3PR.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-Q3PR.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-Q3PR.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-Q3PR.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-Q3PR.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-Q4.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-Q4.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-Q4.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-Q4.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-Q4.5 | < blank > |
| P-HSR-PS-Q4.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-Q4.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-Q4.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q4.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q4.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-Q4.11 | < blank > |
| P-HSR-PS-Q4.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-Q4.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-Q4.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-Q4.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-Q4.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-Q4.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-Q4.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-Q4.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-Q4.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-Q4.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-Q4.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-Q4.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-Q4.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-Q4.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-Q4.26 | < blank > |
| P-HSR-PS-Q4.27 | < blank > |
| P-HSR-PS-Q4.28 | < blank > |
| P-HSR-PS-Q4.29 | < blank > |
| P-HSR-PS-Q4.30 | < blank > |
| P-HSR-PS-Q4.31 | < blank > |
| P-HSR-PS-Q4.32 | < blank > |
| P-HSR-PS-Q4.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-Q4.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-Q4.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-Q4.36 | The design shall have thermal switches TBD |
| P-HSR-PS-Q4.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-Q4.38 | The design shall have water flow switches TBD |
| P-HSR-PS-Q4.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-Q4.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-Q4.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-Q4.42 | The lead end indications shall be TBD |
| P-HSR-PS-Q4.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-Q4.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-Q4.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-Q4.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-Q4.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-Q4PR.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-Q4PR.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-Q4PR.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-Q4PR.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-Q4PR.5 | < blank > |
| P-HSR-PS-Q4PR.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-Q4PR.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-Q4PR.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q4PR.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q4PR.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-Q4PR.11 | < blank > |
| P-HSR-PS-Q4PR.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-Q4PR.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-Q4PR.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-Q4PR.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-Q4PR.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-Q4PR.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-Q4PR.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-Q4PR.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-Q4PR.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-Q4PR.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-Q4PR.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-Q4PR.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-Q4PR.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-Q4PR.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-Q4PR.26 | < blank > |
| P-HSR-PS-Q4PR.27 | < blank > |
| P-HSR-PS-Q4PR.28 | < blank > |
| P-HSR-PS-Q4PR.29 | < blank > |
| P-HSR-PS-Q4PR.30 | < blank > |
| P-HSR-PS-Q4PR.31 | < blank > |
| P-HSR-PS-Q4PR.32 | < blank > |
| P-HSR-PS-Q4PR.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-Q4PR.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-Q4PR.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-Q4PR.36 | The design shall have thermal switches TBD |
| P-HSR-PS-Q4PR.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-Q4PR.38 | The design shall have water flow switches TBD |
| P-HSR-PS-Q4PR.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-Q4PR.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-Q4PR.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-Q4PR.42 | The lead end indications shall be TBD |
| P-HSR-PS-Q4PR.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-Q4PR.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-Q4PR.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-Q4PR.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-Q4PR.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-Q5.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-Q5.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-Q5.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-Q5.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-Q5.5 | < blank > |
| P-HSR-PS-Q5.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-Q5.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-Q5.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q5.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q5.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-Q5.11 | < blank > |
| P-HSR-PS-Q5.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-Q5.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-Q5.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-Q5.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-Q5.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-Q5.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-Q5.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-Q5.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-Q5.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-Q5.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-Q5.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-Q5.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-Q5.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-Q5.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-Q5.26 | < blank > |
| P-HSR-PS-Q5.27 | < blank > |
| P-HSR-PS-Q5.28 | < blank > |
| P-HSR-PS-Q5.29 | < blank > |
| P-HSR-PS-Q5.30 | < blank > |
| P-HSR-PS-Q5.31 | < blank > |
| P-HSR-PS-Q5.32 | < blank > |
| P-HSR-PS-Q5.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-Q5.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-Q5.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-Q5.36 | The design shall have thermal switches TBD |
| P-HSR-PS-Q5.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-Q5.38 | The design shall have water flow switches TBD |
| P-HSR-PS-Q5.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-Q5.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-Q5.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-Q5.42 | The lead end indications shall be TBD |
| P-HSR-PS-Q5.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-Q5.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-Q5.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-Q5.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-Q5.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-Q5PR.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-Q5PR.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-Q5PR.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-Q5PR.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-Q5PR.5 | < blank > |
| P-HSR-PS-Q5PR.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-Q5PR.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-Q5PR.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q5PR.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q5PR.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-Q5PR.11 | < blank > |
| P-HSR-PS-Q5PR.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-Q5PR.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-Q5PR.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-Q5PR.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-Q5PR.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-Q5PR.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-Q5PR.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-Q5PR.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-Q5PR.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-Q5PR.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-Q5PR.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-Q5PR.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-Q5PR.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-Q5PR.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-Q5PR.26 | < blank > |
| P-HSR-PS-Q5PR.27 | < blank > |
| P-HSR-PS-Q5PR.28 | < blank > |
| P-HSR-PS-Q5PR.29 | < blank > |
| P-HSR-PS-Q5PR.30 | < blank > |
| P-HSR-PS-Q5PR.31 | < blank > |
| P-HSR-PS-Q5PR.32 | < blank > |
| P-HSR-PS-Q5PR.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-Q5PR.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-Q5PR.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-Q5PR.36 | The design shall have thermal switches TBD |
| P-HSR-PS-Q5PR.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-Q5PR.38 | The design shall have water flow switches TBD |
| P-HSR-PS-Q5PR.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-Q5PR.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-Q5PR.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-Q5PR.42 | The lead end indications shall be TBD |
| P-HSR-PS-Q5PR.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-Q5PR.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-Q5PR.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-Q5PR.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-Q5PR.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-Q7.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-Q7.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-Q7.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-Q7.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-Q7.5 | < blank > |
| P-HSR-PS-Q7.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-Q7.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-Q7.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q7.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q7.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-Q7.11 | < blank > |
| P-HSR-PS-Q7.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-Q7.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-Q7.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-Q7.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-Q7.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-Q7.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-Q7.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-Q7.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-Q7.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-Q7.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-Q7.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-Q7.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-Q7.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-Q7.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-Q7.26 | < blank > |
| P-HSR-PS-Q7.27 | < blank > |
| P-HSR-PS-Q7.28 | < blank > |
| P-HSR-PS-Q7.29 | < blank > |
| P-HSR-PS-Q7.30 | < blank > |
| P-HSR-PS-Q7.31 | < blank > |
| P-HSR-PS-Q7.32 | < blank > |
| P-HSR-PS-Q7.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-Q7.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-Q7.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-Q7.36 | The design shall have thermal switches TBD |
| P-HSR-PS-Q7.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-Q7.38 | The design shall have water flow switches TBD |
| P-HSR-PS-Q7.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-Q7.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-Q7.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-Q7.42 | The lead end indications shall be TBD |
| P-HSR-PS-Q7.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-Q7.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-Q7.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-Q7.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-Q7.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-Q8.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-Q8.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-Q8.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-Q8.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-Q8.5 | < blank > |
| P-HSR-PS-Q8.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-Q8.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-Q8.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q8.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q8.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-Q8.11 | < blank > |
| P-HSR-PS-Q8.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-Q8.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-Q8.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-Q8.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-Q8.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-Q8.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-Q8.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-Q8.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-Q8.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-Q8.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-Q8.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-Q8.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-Q8.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-Q8.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-Q8.26 | < blank > |
| P-HSR-PS-Q8.27 | < blank > |
| P-HSR-PS-Q8.28 | < blank > |
| P-HSR-PS-Q8.29 | < blank > |
| P-HSR-PS-Q8.30 | < blank > |
| P-HSR-PS-Q8.31 | < blank > |
| P-HSR-PS-Q8.32 | < blank > |
| P-HSR-PS-Q8.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-Q8.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-Q8.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-Q8.36 | The design shall have thermal switches TBD |
| P-HSR-PS-Q8.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-Q8.38 | The design shall have water flow switches TBD |
| P-HSR-PS-Q8.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-Q8.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-Q8.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-Q8.42 | The lead end indications shall be TBD |
| P-HSR-PS-Q8.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-Q8.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-Q8.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-Q8.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-Q8.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-Q9.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-Q9.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-Q9.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-Q9.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-Q9.5 | < blank > |
| P-HSR-PS-Q9.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-Q9.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-Q9.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q9.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-Q9.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-Q9.11 | < blank > |
| P-HSR-PS-Q9.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-Q9.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-Q9.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-Q9.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-Q9.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-Q9.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-Q9.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-Q9.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-Q9.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-Q9.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-Q9.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-Q9.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-Q9.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-Q9.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-Q9.26 | < blank > |
| P-HSR-PS-Q9.27 | < blank > |
| P-HSR-PS-Q9.28 | < blank > |
| P-HSR-PS-Q9.29 | < blank > |
| P-HSR-PS-Q9.30 | < blank > |
| P-HSR-PS-Q9.31 | < blank > |
| P-HSR-PS-Q9.32 | < blank > |
| P-HSR-PS-Q9.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-Q9.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-Q9.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-Q9.36 | The design shall have thermal switches TBD |
| P-HSR-PS-Q9.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-Q9.38 | The design shall have water flow switches TBD |
| P-HSR-PS-Q9.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-Q9.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-Q9.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-Q9.42 | The lead end indications shall be TBD |
| P-HSR-PS-Q9.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-Q9.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-Q9.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-Q9.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-Q9.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-SLOWKICK_CORR.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-SLOWKICK_CORR.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-SLOWKICK_CORR.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-SLOWKICK_CORR.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-SLOWKICK_CORR.5 | < blank > |
| P-HSR-PS-SLOWKICK_CORR.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-SLOWKICK_CORR.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-SLOWKICK_CORR.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-SLOWKICK_CORR.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-SLOWKICK_CORR.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-SLOWKICK_CORR.11 | < blank > |
| P-HSR-PS-SLOWKICK_CORR.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-SLOWKICK_CORR.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-SLOWKICK_CORR.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-SLOWKICK_CORR.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-SLOWKICK_CORR.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-SLOWKICK_CORR.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-SLOWKICK_CORR.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-SLOWKICK_CORR.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-SLOWKICK_CORR.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-SLOWKICK_CORR.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-SLOWKICK_CORR.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-SLOWKICK_CORR.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-SLOWKICK_CORR.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-SLOWKICK_CORR.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-SLOWKICK_CORR.26 | < blank > |
| P-HSR-PS-SLOWKICK_CORR.27 | < blank > |
| P-HSR-PS-SLOWKICK_CORR.28 | < blank > |
| P-HSR-PS-SLOWKICK_CORR.29 | < blank > |
| P-HSR-PS-SLOWKICK_CORR.30 | < blank > |
| P-HSR-PS-SLOWKICK_CORR.31 | < blank > |
| P-HSR-PS-SLOWKICK_CORR.32 | < blank > |
| P-HSR-PS-SLOWKICK_CORR.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-SLOWKICK_CORR.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-SLOWKICK_CORR.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-SLOWKICK_CORR.36 | The design shall have thermal switches TBD |
| P-HSR-PS-SLOWKICK_CORR.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-SLOWKICK_CORR.38 | The design shall have water flow switches TBD |
| P-HSR-PS-SLOWKICK_CORR.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-SLOWKICK_CORR.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-SLOWKICK_CORR.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-SLOWKICK_CORR.42 | The lead end indications shall be TBD |
| P-HSR-PS-SLOWKICK_CORR.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-SLOWKICK_CORR.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-SLOWKICK_CORR.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-SLOWKICK_CORR.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-SLOWKICK_CORR.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-TQQ1.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-TQQ1.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-TQQ1.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-TQQ1.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-TQQ1.5 | < blank > |
| P-HSR-PS-TQQ1.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-TQQ1.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-TQQ1.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-TQQ1.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-TQQ1.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-TQQ1.11 | < blank > |
| P-HSR-PS-TQQ1.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-TQQ1.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-TQQ1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-TQQ1.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-TQQ1.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-TQQ1.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-TQQ1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-TQQ1.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-TQQ1.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-TQQ1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-TQQ1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-TQQ1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-TQQ1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-TQQ1.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-TQQ1.26 | < blank > |
| P-HSR-PS-TQQ1.27 | < blank > |
| P-HSR-PS-TQQ1.28 | < blank > |
| P-HSR-PS-TQQ1.29 | < blank > |
| P-HSR-PS-TQQ1.30 | < blank > |
| P-HSR-PS-TQQ1.31 | < blank > |
| P-HSR-PS-TQQ1.32 | < blank > |
| P-HSR-PS-TQQ1.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-TQQ1.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-TQQ1.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-TQQ1.36 | The design shall have thermal switches TBD |
| P-HSR-PS-TQQ1.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-TQQ1.38 | The design shall have water flow switches TBD |
| P-HSR-PS-TQQ1.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-TQQ1.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-TQQ1.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-TQQ1.42 | The lead end indications shall be TBD |
| P-HSR-PS-TQQ1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-TQQ1.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-TQQ1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-TQQ1.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-TQQ1.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-TQQ2.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-TQQ2.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-TQQ2.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-TQQ2.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-TQQ2.5 | < blank > |
| P-HSR-PS-TQQ2.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-TQQ2.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-TQQ2.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-TQQ2.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-TQQ2.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-TQQ2.11 | < blank > |
| P-HSR-PS-TQQ2.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-TQQ2.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-TQQ2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-TQQ2.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-TQQ2.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-TQQ2.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-TQQ2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-TQQ2.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-TQQ2.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-TQQ2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-TQQ2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-TQQ2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-TQQ2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-TQQ2.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-TQQ2.26 | < blank > |
| P-HSR-PS-TQQ2.27 | < blank > |
| P-HSR-PS-TQQ2.28 | < blank > |
| P-HSR-PS-TQQ2.29 | < blank > |
| P-HSR-PS-TQQ2.30 | < blank > |
| P-HSR-PS-TQQ2.31 | < blank > |
| P-HSR-PS-TQQ2.32 | < blank > |
| P-HSR-PS-TQQ2.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-TQQ2.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-TQQ2.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-TQQ2.36 | The design shall have thermal switches TBD |
| P-HSR-PS-TQQ2.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-TQQ2.38 | The design shall have water flow switches TBD |
| P-HSR-PS-TQQ2.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-TQQ2.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-TQQ2.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-TQQ2.42 | The lead end indications shall be TBD |
| P-HSR-PS-TQQ2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-TQQ2.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-TQQ2.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-TQQ2.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-TQQ2.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-TQQ3.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-TQQ3.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-TQQ3.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-TQQ3.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-TQQ3.5 | < blank > |
| P-HSR-PS-TQQ3.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-TQQ3.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-TQQ3.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-TQQ3.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-TQQ3.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-TQQ3.11 | < blank > |
| P-HSR-PS-TQQ3.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-TQQ3.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-TQQ3.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-TQQ3.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-TQQ3.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-TQQ3.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-TQQ3.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-TQQ3.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-TQQ3.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-TQQ3.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-TQQ3.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-TQQ3.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-TQQ3.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-TQQ3.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-TQQ3.26 | < blank > |
| P-HSR-PS-TQQ3.27 | < blank > |
| P-HSR-PS-TQQ3.28 | < blank > |
| P-HSR-PS-TQQ3.29 | < blank > |
| P-HSR-PS-TQQ3.30 | < blank > |
| P-HSR-PS-TQQ3.31 | < blank > |
| P-HSR-PS-TQQ3.32 | < blank > |
| P-HSR-PS-TQQ3.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-TQQ3.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-TQQ3.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-TQQ3.36 | The design shall have thermal switches TBD |
| P-HSR-PS-TQQ3.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-TQQ3.38 | The design shall have water flow switches TBD |
| P-HSR-PS-TQQ3.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-TQQ3.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-TQQ3.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-TQQ3.42 | The lead end indications shall be TBD |
| P-HSR-PS-TQQ3.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-TQQ3.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-TQQ3.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-TQQ3.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-TQQ3.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-WARM_DX1.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-WARM_DX1.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-WARM_DX1.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-WARM_DX1.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-WARM_DX1.5 | < blank > |
| P-HSR-PS-WARM_DX1.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-WARM_DX1.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-WARM_DX1.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-WARM_DX1.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-WARM_DX1.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-WARM_DX1.11 | < blank > |
| P-HSR-PS-WARM_DX1.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-WARM_DX1.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-WARM_DX1.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-WARM_DX1.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-WARM_DX1.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-WARM_DX1.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-WARM_DX1.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-WARM_DX1.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-WARM_DX1.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-WARM_DX1.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-WARM_DX1.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-WARM_DX1.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-WARM_DX1.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-WARM_DX1.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_DX1.26 | < blank > |
| P-HSR-PS-WARM_DX1.27 | < blank > |
| P-HSR-PS-WARM_DX1.28 | < blank > |
| P-HSR-PS-WARM_DX1.29 | < blank > |
| P-HSR-PS-WARM_DX1.30 | < blank > |
| P-HSR-PS-WARM_DX1.31 | < blank > |
| P-HSR-PS-WARM_DX1.32 | < blank > |
| P-HSR-PS-WARM_DX1.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-WARM_DX1.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-WARM_DX1.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-WARM_DX1.36 | The design shall have thermal switches TBD |
| P-HSR-PS-WARM_DX1.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-WARM_DX1.38 | The design shall have water flow switches TBD |
| P-HSR-PS-WARM_DX1.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-WARM_DX1.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-WARM_DX1.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-WARM_DX1.42 | The lead end indications shall be TBD |
| P-HSR-PS-WARM_DX1.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-WARM_DX1.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-WARM_DX1.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-WARM_DX1.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-WARM_DX1.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-WARM_DX2.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-WARM_DX2.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-WARM_DX2.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-WARM_DX2.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-WARM_DX2.5 | < blank > |
| P-HSR-PS-WARM_DX2.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-WARM_DX2.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-WARM_DX2.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-WARM_DX2.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-WARM_DX2.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-WARM_DX2.11 | < blank > |
| P-HSR-PS-WARM_DX2.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-WARM_DX2.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-WARM_DX2.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-WARM_DX2.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-WARM_DX2.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-WARM_DX2.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-WARM_DX2.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-WARM_DX2.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-WARM_DX2.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-WARM_DX2.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-WARM_DX2.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-WARM_DX2.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-WARM_DX2.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-WARM_DX2.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_DX2.26 | < blank > |
| P-HSR-PS-WARM_DX2.27 | < blank > |
| P-HSR-PS-WARM_DX2.28 | < blank > |
| P-HSR-PS-WARM_DX2.29 | < blank > |
| P-HSR-PS-WARM_DX2.30 | < blank > |
| P-HSR-PS-WARM_DX2.31 | < blank > |
| P-HSR-PS-WARM_DX2.32 | < blank > |
| P-HSR-PS-WARM_DX2.33 | The current required to be shunted through the magnet shall be TBD |
| P-HSR-PS-WARM_DX2.34 | The magnet turns ratio shall be TBD |
| P-HSR-PS-WARM_DX2.35 | The terminal voltage shall be TBD V |
| P-HSR-PS-WARM_DX2.36 | The design shall have thermal switches TBD |
| P-HSR-PS-WARM_DX2.37 | The thermal switch connection numbers shall be TBD |
| P-HSR-PS-WARM_DX2.38 | The design shall have water flow switches TBD |
| P-HSR-PS-WARM_DX2.39 | The water flow switch connections numbers shall be TBD |
| P-HSR-PS-WARM_DX2.40 | The design shall have access controls interlocks TBD |
| P-HSR-PS-WARM_DX2.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-WARM_DX2.42 | The lead end indications shall be TBD |
| P-HSR-PS-WARM_DX2.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-WARM_DX2.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-WARM_DX2.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-WARM_DX2.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-WARM_DX2.47 | The magnet polarity connections shall be TBD |
| P-HSR-PS-WARM_QUAD.01 | The number of Independent functions on the magnets being powered shall be - |
| P-HSR-PS-WARM_QUAD.02 | The maximum magnet string resistance to be powered shall be RHIC ohm |
| P-HSR-PS-WARM_QUAD.03 | The maximum magnet string inductance to be powered shall be RHIC H |
| P-HSR-PS-WARM_QUAD.04 | The magnets being powered shall be saturated RHIC Y/N |
| P-HSR-PS-WARM_QUAD.5 | < blank > |
| P-HSR-PS-WARM_QUAD.06 | The voltage to ground of the magnet being powered shall be RHIC V |
| P-HSR-PS-WARM_QUAD.07 | The nominal current of the magnets being powered shall be RHIC A |
| P-HSR-PS-WARM_QUAD.08 | The minimum current the PS must operate at shall be RHIC A |
| P-HSR-PS-WARM_QUAD.09 | The maximum current the PS must operate at shall be RHIC A |
| P-HSR-PS-WARM_QUAD.10 | The PS current type shall be DC (DC or AC) |
| P-HSR-PS-WARM_QUAD.11 | < blank > |
| P-HSR-PS-WARM_QUAD.12 | The peak waveshape di/dt during ramping shall be RHIC |
| P-HSR-PS-WARM_QUAD.13 | The full power bandwidth required shall be RHIC |
| P-HSR-PS-WARM_QUAD.14 | The ppm of full scale current (peak to peak) shall be TBD % |
| P-HSR-PS-WARM_QUAD.15 | The time period for specified stability shall be TBD s |
| P-HSR-PS-WARM_QUAD.16 | The short term stability shall be TBD A/s |
| P-HSR-PS-WARM_QUAD.17 | The long term stability shall be TBD A/s |
| P-HSR-PS-WARM_QUAD.18 | The current setpoint resolution (min size in bits) shall be TBD bits |
| P-HSR-PS-WARM_QUAD.19 | The synchronization required between PS's shall be TBD s |
| P-HSR-PS-WARM_QUAD.20 | The synchronization timing of synchronization shall be TBD s |
| P-HSR-PS-WARM_QUAD.21 | The max allowable current ripple (peak to peak) TBD A |
| P-HSR-PS-WARM_QUAD.22 | The max current ripple frequency range (Hz) TBD Hz |
| P-HSR-PS-WARM_QUAD.23 | WRT the ripple frequency the following resonant frequencies shall be avoided TBD Hz |
| P-HSR-PS-WARM_QUAD.24 | The max voltage ripple (peak to peak) shall be TBD V |
| P-HSR-PS-WARM_QUAD.25 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.26 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.27 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.28 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.29 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.30 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.31 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.32 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.33 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.34 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.35 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.36 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.37 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.38 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.39 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.40 | An NMR shall be required to measure the field TBD A/s |
| P-HSR-PS-WARM_QUAD.41 | The main terminals lug details shall be TBD |
| P-HSR-PS-WARM_QUAD.42 | The lead end indications shall be TBD |
| P-HSR-PS-WARM_QUAD.43 | The lugs details for thermal switch and water switches shall be TBD |
| P-HSR-PS-WARM_QUAD.44 | The lug details for the auxiliary windings shall be TBD |
| P-HSR-PS-WARM_QUAD.45 | The A/B terminal labeling details shall be TBD Draw id |
| P-HSR-PS-WARM_QUAD.46 | The magnet drawing with terminations details shall be TBD |
| P-HSR-PS-WARM_QUAD.47 | The magnet polarity connections shall be TBD |
This function not yet implemented.