P-EIS-RCS-MAG-S0.21.2

Requirement details, history, relationships and interfaces associated with requirement P-EIS-RCS-MAG-S0.21.2

Parents
F-EIS- RCS-MAG.3	The sextupoles shall be sorted into appropriate “families” and powered accordingly.
F-EIS- RCS-MAG.8	Sextupoles shall be sorted into “families” with the family structure dependent on the linear lattice configuration (betatron phase advance per FODO cell).
F-EIS- RCS-MAG.9	The maximum integrated field strength of the FODO sextupoles needs to be sufficient to correct chromaticity to within 1 unit in both planes.
F-EIS- RCS-MAG.12	The aperture of all magnets shall be large enough to accommodate the vacuum chamber.
F-EIS-RCS-MAG.1	The magnets shall meet the requirements defined by the physics lattice.
F-EIS-RCS-MAG.10	The straight sections IR2,4,10 and 12 shall use FODO cells for optic control.
F-EIS-RCS.9	The RCS lattice shall provide a maximum dynamic aperture of 3 sigma w.r.t Gaussian electron beam distribution in transverse dimensions.
F-EIS-RCS.10	The RCS off-momentum aperture shall reach 1.0% dp/p.
F-EIS-RCS.11	Quadrupoles and sextupoles shall be aligned to with 0.2 mm RMS or better with a 2.5 sigma cutoff.
F-EIS.1	The EIS polarized electron source shall create a spin polarized beam of electrons and inject them into the ESR.
F-EIS.2	The injected spin polarized electron beam shall meet all the parameters set forth in the MPT. [Document#:EIC-SEG-RSI-005]
F-EIS.3	The EIS shall consist of five sections: 1. Pre-Injector 2. LTR Transfer Line 3. BAR 4. RCS 5. RTE Transfer Line
Children
No children.

This function not yet implemented.