Requirement Details
Electron Ion Collider
P-EIS-RCS-MAG-C0.3
Requirement details, history, relationships and interfaces associated with requirement P-EIS-RCS-MAG-C0.3
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 01/28/2025 17:40 | |||
| Identifier: | P-EIS-RCS-MAG-C0.3 | WBS: | 6.03.02.01.03 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | Not Applicable | |
| Description: | < blank > | ||
| Comments: | |||
| Record Date: 01/27/2025 16:43 | |||
| Identifier: | P-EIS-RCS-MAG-C0.3 | WBS: | 6.03.02.01.03 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | Approved | |
| Description: | < blank > | ||
| Comments: | |||
| Parents | |
| F-EIS- RCS-MAG.4 | There shall be dipole correctors capable of adjusting the beam orbit. |
| F-EIS- RCS-MAG.10 | Window-frame dipole corrector magnets capable of providing both horizontal and vertical dipole fields to correct the beam orbit in both transverse planes shall be placed adjacent to most of the quadrupoles. |
| F-EIS- RCS-MAG.11 | The strength of the window-frame dipole correctors needs to be chosen to correct for any source of orbit distortion and should have a margin for beam based diagnostic purpose. |
| F-EIS- RCS-MAG.12 | The aperture of all magnets shall be large enough to accommodate the vacuum chamber. |
| F-EIS-RCS-MAG.1 | The magnets shall meet the requirements defined by the physics lattice. |
| F-EIS-RCS.9 | The RCS lattice shall provide a maximum dynamic aperture of 3 sigma w.r.t Gaussian electron beam distribution in transverse dimensions. |
| F-EIS-RCS.10 | The RCS off-momentum aperture shall reach 1.0% dp/p. |
| F-EIS-RCS.11 | Quadrupoles and sextupoles shall be aligned to with 0.2 mm RMS or better with a 2.5 sigma cutoff. |
| F-EIS-RCS.15 | The RCS lattice shall contain provisions for correctors such as dipole correctors etc., as needed. |
| F-EIS.1 | The EIS polarized electron source shall create a spin polarized beam of electrons and inject them into the ESR. |
| F-EIS.2 | The injected spin polarized electron beam shall meet all the parameters set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
| F-EIS.3 | The EIS shall consist of five sections: 1. Pre-Injector 2. LTR Transfer Line 3. BAR 4. RCS 5. RTE Transfer Line |
| Children | |
| No children. | |
This function not yet implemented.