Requirement Details
Electron Ion Collider
F-EIS-PREINJ-TLINE-MEBT-RCS-INJECTOR-MAG-SEP.1
Requirement details, history, relationships and interfaces associated with requirement F-EIS-PREINJ-TLINE-MEBT-RCS-INJECTOR-MAG-SEP.1
CURRENT RECORD
ARCHIVE RECORDS
RELATIONSHIPS
INTERFACES
Record Date: 03/20/2025 17:29 | |||
Identifier: | F-EIS-PREINJ-TLINE-MEBT-RCS-INJECTOR-MAG-SEP.1 | WBS: | 6.03.03 |
Date Modified: | TBD: | FALSE | |
Status Date: | Status: | In Process | |
Description: | The septum magnet shall be capable of deflecting the incoming electron beam into the RCS and shielding the circulating beam already in the RCS. | ||
Comments: |
No archive versions
Parents | |
G-EIS.2 | The EIS shall provide an electron beam having sufficient energy to meet the ESR beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
G-EIS.3 | The EIS shall provide an electron beam with the RMS bunch momentum spread at extraction which meet the ESR beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
G-EIS.4 | The EIS pre-injector shall provide an electron beam to the ESR having a horizontal beam emittance which is compatible with operation of the ESR. |
G-EIS.5 | The EIS pre-injector shall provide an electron beam to the ESR having a vertical beam emittance which is compatible with operation of the ESR. |
G-EIS.6 | The EIS shall inject into the ESR at a rate of 1[Hz]. |
G-EIS.7 | The EIS shall inject one bunch into the ESR whilst being able to provide 1 bunch per injection cycle. |
G-EIS.8 | The EIS shall provide an electron beam to the ESR having RMS Bunch lengths at extraction to meet beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
G-EIS.9 | The EIS shall provide an electron beam to the ESR having the bunch charge at extraction to meet the beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
G-EIS.10 | The EIS bunch replacement process shall deliver polarized replacement bunches capable of creating all the ESR polarization patterns needed to meet the physics goals. |
Children | |
P-EIS-RCS-PPD-INJ_PULSE_KICK.01 | The location (Section) shall be 2 o'clock |
P-EIS-RCS-PPD-INJ_PULSE_KICK.02 | The dimension in W shall be 3 (ft) |
P-EIS-RCS-PPD-INJ_PULSE_KICK.03 | The dimension in L shall be 5 (ft) |
P-EIS-RCS-PPD-INJ_PULSE_KICK.04 | The dimension in H shall be 7 (ft) |
P-EIS-RCS-PPD-INJ_PULSE_KICK.05 | The num magnets shall be 3 |
P-EIS-RCS-PPD-INJ_PULSE_KICK.06 | The mag gap shall be tbd (cm) |
P-EIS-RCS-PPD-INJ_PULSE_KICK.07 | The rise time shall be 0.002 (sec) |
P-EIS-RCS-PPD-INJ_PULSE_KICK.08 | The fall time shall be 0.002 (sec) |
P-EIS-RCS-PPD-INJ_PULSE_KICK.09 | The flat top time shall be 0.05 (sec) |
P-EIS-RCS-PPD-INJ_PULSE_KICK.10 | The waveshape shall be trap |
P-EIS-RCS-PPD-INJ_PULSE_KICK.11 | The flat top repeatability shall be tbd % |
P-EIS-RCS-PPD-INJ_PULSE_KICK.12 | The uniformity of the flattop shall be tbd (V) |
P-EIS-RCS-PPD-INJ_PULSE_KICK.13 | The deflecting Angle shall be tbd (mRad) |
P-EIS-RCS-PPD-INJ_PULSE_KICK.14 | The rep rate spec shall be 100 (Hz) |
P-EIS-RCS-PPD-INJ_PULSE_KICK.15 | The output voltage Spec shall be 30 (Volts) |
P-EIS-RCS-PPD-INJ_PULSE_KICK.16 | The output current spec shall be 425 (Amps) |
P-EIS-RCS-PPD-INJ_PULSE_KICK.17 | The inductance with cable shall be 6 (uH) |
P-EIS-RCS-PPD-INJ_PULSE_KICK.18 | The cooling type shall be water |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.01 | The location (Section) shall be 2 o'clock |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.02 | The dimension in W shall be 4 (ft) |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.03 | The dimension in L shall be 8 (ft) |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.04 | The dimension in H shall be 7 (ft) |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.05 | The num magnets shall be 1 |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.06 | The mag gap shall be tbd (cm) |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.07 | The rise time shall be 0.00001 (sec) |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.08 | The fall time shall be 0.00001 (sec) |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.09 | The flat top time shall be 0.005 (sec) |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.10 | The waveshape shall be trap |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.11 | The flat top repeatability shall be tbd % |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.12 | The uniformity of the flattop shall be tbd (V) |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.13 | The deflecting Angle shall be 30 (mRad) |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.14 | The rep rate spec shall be 100 (Hz) |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.15 | The output voltage Spec shall be 30 (Volts) |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.17 | The inductance with cable shall be 12.5 (uH) |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.16 | The output current spec shall be 530 (Amps) |
P-EIS-RCS-PPD-INJ_PULSE_SEPT.18 | The cooling type shall be water |
This function not yet implemented.