Requirement Details
Electron Ion Collider
F-EIS-METL-RF-FKICK.1
Requirement details, history, relationships and interfaces associated with requirement F-EIS-METL-RF-FKICK.1
- CURRENT RECORD
- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
Record Date: 09/25/2024 16:11 | |||
Identifier: | F-EIS-METL-RF-FKICK.1 | WBS: | 6.03 |
Date Modified: | TBD: | FALSE | |
Status Date: | Status: | In Process | |
Description: | There shall be a special RF kicker to kick the injected beam into neighboring RF buckets without disturbing the 8 circulating bunches. | ||
Comments: |
No archive versions
Parents | |
G-EIS.2 | The EIS shall provide an electron beam having sufficient energy to meet the ESR beam requirements as set forth in [5.9]. |
G-EIS.3 | The EIS shall provide an electron beam with the RMS bunch momentum spreads at extraction which meet the ESR beam requirements as set forth in [5.9]. |
G-EIS.4 | The EIS pre-injector shall provide an electron beam to the ESR having a horizontal beam emittance which is compatible with operation of the ESR. |
G-EIS.5 | The EIS pre-injector shall provide an electron beam to the ESR having a vertical beam emittance which is compatible with operation of the ESR. |
G-EIS.6 | The EIS shall inject into the ESR at a rate of 1[Hz]. |
G-EIS.7 | The EIS shall inject one bunch into the ESR whilst being able to provide 2 bunches per injection cycle. |
G-EIS.8 | The EIS shall provide an electron beam to the ESR having RMS Bunch lengths at extraction to meet beam requirements as set forth in [5.9]. |
G-EIS.10 | The ESR bunch replacement pattern will be defined by 1.the required polarization pattern to be provided to the experiments, 2.decay rates and 3. The RF cogging limitations of the beam transfer between RCS and ESR. |
G-EIS.9 | The EIS shall provide an electron beam to the ESR having the bunch charge at extraction to meet the beam requirements as set forth in [5.9]. |
G-EIS.14 | The EIS shall be designed to meet all its requirements whilst fitting into the existing RHIS complex and accommodate all other required EIC systems along with their installation and maintenance needs. |
Children | |
P-EIS-RCS-PPD-INJ_RF_KICK.1 | The location (Section) shall be 2 o'clock |
P-EIS-RCS-PPD-INJ_RF_KICK.2 | The dimension in W shall be 5 (ft) |
P-EIS-RCS-PPD-INJ_RF_KICK.3 | The dimension in L shall be 10 (ft) |
P-EIS-RCS-PPD-INJ_RF_KICK.4 | The dimension in H shall be 7 (ft) |
P-EIS-RCS-PPD-INJ_RF_KICK.5 | The num magnets shall be 1 |
P-EIS-RCS-PPD-INJ_RF_KICK.6 | The mag gap shall be tbd (cm) |
P-EIS-RCS-PPD-INJ_RF_KICK.7 | The rise time shall be 0.00001 (sec) |
P-EIS-RCS-PPD-INJ_RF_KICK.8 | The fall time shall be 0.00001 (sec) |
P-EIS-RCS-PPD-INJ_RF_KICK.9 | The flat top time shall be 0.0000025 (sec) |
P-EIS-RCS-PPD-INJ_RF_KICK.10 | The waveshape shall be trap |
P-EIS-RCS-PPD-INJ_RF_KICK.11 | The flat top repeatability shall be tbd % |
P-EIS-RCS-PPD-INJ_RF_KICK.12 | The uniformity of the flattop shall be tbd (V) |
P-EIS-RCS-PPD-INJ_RF_KICK.13 | The deflecting Angle shall be 1 (mRad) |
P-EIS-RCS-PPD-INJ_RF_KICK.14 | The rep rate spec shall be 100 (Hz) |
P-EIS-RCS-PPD-INJ_RF_KICK.15 | The output voltage Spec shall be 5000 (Volts) |
P-EIS-RCS-PPD-INJ_RF_KICK.16 | The output current spec shall be 2300 (Amps) |
P-EIS-RCS-PPD-INJ_RF_KICK.17 | The inductance with cable shall be 4 (uH) |
P-EIS-RCS-PPD-INJ_RF_KICK.18 | The cooling type shall be water |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.1 | The Type of system shall be NRF |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.2 | The RF Harmonic Number shall be 1896 |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.3 | The RF Drive Frequency shall be 147.75 MHz |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.4 | The RF Wavelength shall be 2.02905216920474 m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.5 | The Required kicking angle shall be 0.375 mrad |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.6 | The Required transverse voltage shall be 150 kV |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.7 | The Installed Voltage shall be 150 kV |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.8 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.9 | The Envelop Rise Time (0 to 100%) shall be <9.7 μs |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.10 | The Envelop Flat top width shall be >=3 μs |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.11 | The Envelop Fall time (100% to 0) shall be <9.7 μs |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.12 | The Pulse Rise/Fall Time shall be TBD ns |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.13 | The Fundamental Mode Damper shall not be required |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.14 | The RF System Impedance Budget (Single bunch microwave instability) (L) shall be 0.1 ohm |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.15 | The RF System Impedance Budget (H) shall be TBD Mohm/m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.16 | The RF System Impedance Budget (V) shall be TBD Mohm/m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.17 | The Impedance budget coupled bunch instability (L) shall be 1.59MOhm (<1GHz), 1.59MOhm-GHz (>1GHz) MohmGHz |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.18 | The RF System Impedance Budget (H) shall be 12 Mohm/m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.19 | The RF System Impedance Budget (V) shall be 12 Mohm/m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.20 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.21 | The Maximum Dipole content shall be main kick |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.22 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.23 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.24 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.25 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.26 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.27 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.28 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.29 | The Cavity Minimum Aperture (diameter) shall be 32.9 mm |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.30 | The Maximum Beam Offset at Cavities (H) shall be TBD mm |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.31 | The Maximum Beam Offset at Cavities (V) shall be TBD mm |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.32 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.33 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.34 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.35 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.36 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.37 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.38 | The Beamline Space Allocation (Beamline Length) shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.39 | The Beamline Space Allocation (Width) shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.40 | The Beamline Space Allocation (Height) shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.41 | The Distance Beamline Center to Ceiling shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.42 | The Distance Beamline Center to Floor shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.43 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.44 | The provided detailed bunch pattern shall be met TBD |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.45 | The following fill sequence shall be met TBD |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.46 | The following synchronization requirements shall be met TBD |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.47 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.48 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC1_MODE.49 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.1 | The Type of system shall be NRF |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.2 | The RF Harmonic Number shall be 3792 |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.3 | The RF Drive Frequency shall be 295.5 MHz |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.4 | The RF Wavelength shall be 1.01452608460237 m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.5 | The Required kicking angle shall be 0.25 mrad |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.6 | The Required transverse voltage shall be 100 kV |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.7 | The Installed Voltage shall be 100 kV |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.8 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.9 | The Envelop Rise Time (0 to 100%) shall be <9.7 μs |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.10 | The Envelop Flat top width shall be >=3 μs |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.11 | The Envelop Fall time (100% to 0) shall be <9.7 μs |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.12 | The Pulse Rise/Fall Time shall be TBD ns |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.13 | The Fundamental Mode Damper shall not be required |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.14 | The RF System Impedance Budget (Single bunch microwave instability) (L) shall be 0.1 ohm |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.15 | The RF System Impedance Budget (H) shall be TBD Mohm/m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.16 | The RF System Impedance Budget (V) shall be TBD Mohm/m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.17 | The Impedance budget coupled bunch instability (L) shall be 1.59MOhm (<1GHz), 1.59MOhm-GHz (>1GHz) MohmGHz |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.18 | The RF System Impedance Budget (H) shall be 12 Mohm/m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.19 | The RF System Impedance Budget (V) shall be 12 Mohm/m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.20 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.21 | The Maximum Dipole content shall be main kick |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.22 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.23 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.24 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.25 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.26 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.27 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.28 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.29 | The Cavity Minimum Aperture (diameter) shall be 32.9 mm |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.30 | The Maximum Beam Offset at Cavities (H) shall be TBD mm |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.31 | The Maximum Beam Offset at Cavities (V) shall be TBD mm |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.32 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.33 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.34 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.35 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.36 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.37 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.38 | The Beamline Space Allocation (Beamline Length) shall be 9.8 m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.39 | The Beamline Space Allocation (Width) shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.40 | The Beamline Space Allocation (Height) shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.41 | The Distance Beamline Center to Ceiling shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.42 | The Distance Beamline Center to Floor shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.43 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.44 | The provided detailed bunch pattern shall be met TBD |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.45 | The following fill sequence shall be met TBD |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.46 | The following synchronization requirements shall be met TBD |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.47 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.48 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC2_MODE.49 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.1 | The Type of system shall be NRF |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.2 | The RF Harmonic Number shall be 5688 |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.3 | The RF Drive Frequency shall be 443.25 MHz |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.4 | The RF Wavelength shall be 0.676350723068246 m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.5 | The Required kicking angle shall be 0.125 mrad |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.6 | The Required transverse voltage shall be 50 kV |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.7 | The Installed Voltage shall be 50 kV |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.8 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.9 | The Envelop Rise Time (0 to 100%) shall be <9.7 μs |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.10 | The Envelop Flat top width shall be >=3 μs |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.11 | The Envelop Fall time (100% to 0) shall be <9.7 μs |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.12 | The Pulse Rise/Fall Time shall be TBD ns |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.13 | The Fundamental Mode Damper shall not be required |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.14 | The RF System Impedance Budget (Single bunch microwave instability) (L) shall be 0.1 ohm |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.15 | The RF System Impedance Budget (H) shall be TBD Mohm/m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.16 | The RF System Impedance Budget (V) shall be TBD Mohm/m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.17 | The Impedance budget coupled bunch instability (L) shall be 1.59MOhm (<1GHz), 1.59MOhm-GHz (>1GHz) MohmGHz |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.18 | The RF System Impedance Budget (H) shall be 12 Mohm/m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.19 | The RF System Impedance Budget (V) shall be 12 Mohm/m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.20 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.21 | The Maximum Dipole content shall be main kick |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.22 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.23 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.24 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.25 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.26 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.27 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.28 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.29 | The Cavity Minimum Aperture (diameter) shall be 32.9 mm |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.30 | The Maximum Beam Offset at Cavities (H) shall be TBD mm |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.31 | The Maximum Beam Offset at Cavities (V) shall be TBD mm |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.32 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.33 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.34 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.35 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.36 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.37 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.38 | The Beamline Space Allocation (Beamline Length) shall be 10.8 m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.39 | The Beamline Space Allocation (Width) shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.40 | The Beamline Space Allocation (Height) shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.41 | The Distance Beamline Center to Ceiling shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.42 | The Distance Beamline Center to Floor shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.43 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.44 | The provided detailed bunch pattern shall be met TBD |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.45 | The following fill sequence shall be met TBD |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.46 | The following synchronization requirements shall be met TBD |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.47 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.48 | < blank > |
P-EIS-RCS-RF-INJ_KICK-HARMONIC3_MODE.49 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.1 | The Type of system shall be |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.2 | The RF Harmonic Number shall be n.a. |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.3 | The RF Drive Frequency shall be n.a. MHz |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.4 | The RF Wavelength shall be n.a. m |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.5 | The Required kicking angle shall be 1 mrad |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.6 | The Required transverse voltage shall be 400 kV |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.7 | The Installed Voltage shall be 400 kV |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.8 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.9 | The Envelop Rise Time (0 to 100%) shall be <9.7 μs |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.10 | The Envelop Flat top width shall be >=3 μs |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.11 | The Envelop Fall time (100% to 0) shall be <9.7 μs |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.12 | The Pulse Rise/Fall Time shall be <1.6 ns |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.13 | The Fundamental Mode Damper shall be required TBD Yes / No |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.14 | The RF System Impedance Budget (Single bunch microwave instability) (L) shall be TBD ohm |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.15 | The RF System Impedance Budget (H) shall be TBD Mohm/m |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.16 | The RF System Impedance Budget (V) shall be TBD Mohm/m |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.17 | The Impedance budget coupled bunch instability (L) shall be n.a. MohmGHz |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.18 | The RF System Impedance Budget (H) shall be n.a. Mohm/m |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.19 | The RF System Impedance Budget (V) shall be n.a. Mohm/m |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.20 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.21 | The Maximum Dipole content shall be main kick |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.22 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.23 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.24 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.25 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.26 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.27 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.28 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.29 | The Cavity Minimum Aperture (diameter) shall be 32.9 mm |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.30 | The Maximum Beam Offset at Cavities (H) shall be TBD mm |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.31 | The Maximum Beam Offset at Cavities (V) shall be TBD mm |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.32 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.33 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.34 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.35 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.36 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.37 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.38 | The Beamline Space Allocation (Beamline Length) shall be 11.8 m |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.39 | The Beamline Space Allocation (Width) shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.40 | The Beamline Space Allocation (Height) shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.41 | The Distance Beamline Center to Ceiling shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.42 | The Distance Beamline Center to Floor shall be TBD m |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.43 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.44 | The provided detailed bunch pattern shall be met TBD |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.45 | The following fill sequence shall be met TBD |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.46 | The following synchronization requirements shall be met TBD |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.47 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.48 | < blank > |
P-EIS-RCS-RF-INJ_KICK-SUM_INC_MODE.49 | < blank > |
This function not yet implemented.