Requirement Details
Electron Ion Collider
F-EIS-METL-RCS-INJ.5
Requirement details, history, relationships and interfaces associated with requirement F-EIS-METL-RCS-INJ.5
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 10/10/2024 14:48 | |||
| Identifier: | F-EIS-METL-RCS-INJ.5 | WBS: | 6.03 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | The injection system shall ensure the bunch emittance shall match the requirements of the RCS RF system and such, to avoid collective instabilities and to stay within the off-momentum aperture. | ||
| Comments: | |||
No archive versions
| Parents | |
| G-EIS.2 | The EIS shall provide an electron beam having sufficient energy to meet the ESR beam requirements as set forth in [5.9]. |
| G-EIS.3 | The EIS shall provide an electron beam with the RMS bunch momentum spreads at extraction which meet the ESR beam requirements as set forth in [5.9]. |
| G-EIS.4 | The EIS pre-injector shall provide an electron beam to the ESR having a horizontal beam emittance which is compatible with operation of the ESR. |
| G-EIS.5 | The EIS pre-injector shall provide an electron beam to the ESR having a vertical beam emittance which is compatible with operation of the ESR. |
| G-EIS.6 | The EIS shall inject into the ESR at a rate of 1[Hz]. |
| G-EIS.7 | The EIS shall inject one bunch into the ESR whilst being able to provide 2 bunches per injection cycle. |
| G-EIS.8 | The EIS shall provide an electron beam to the ESR having RMS Bunch lengths at extraction to meet beam requirements as set forth in [5.9]. |
| G-EIS.10 | The ESR bunch replacement pattern will be defined by 1.the required polarization pattern to be provided to the experiments, 2.decay rates and 3. The RF cogging limitations of the beam transfer between RCS and ESR. |
| G-EIS.9 | The EIS shall provide an electron beam to the ESR having the bunch charge at extraction to meet the beam requirements as set forth in [5.9]. |
| G-EIS.14 | The EIS shall be designed to meet all its requirements whilst fitting into the existing RHIS complex and accommodate all other required EIC systems along with their installation and maintenance needs. |
| Children | |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.1 | The location (Section) shall be 2 o'clock |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.2 | The dimension in W shall be 3 (ft) |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.3 | The dimension in L shall be 5 (ft) |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.4 | The dimension in H shall be 7 (ft) |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.5 | The num magnets shall be 3 |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.6 | The mag gap shall be tbd (cm) |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.7 | The rise time shall be 0.002 (sec) |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.8 | The fall time shall be 0.002 (sec) |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.9 | The flat top time shall be 0.05 (sec) |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.10 | The waveshape shall be trap |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.11 | The flat top repeatability shall be tbd % |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.12 | The uniformity of the flattop shall be tbd (V) |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.13 | The deflecting Angle shall be tbd (mRad) |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.14 | The rep rate spec shall be 100 (Hz) |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.15 | The output voltage Spec shall be 30 (Volts) |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.16 | The output current spec shall be 425 (Amps) |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.17 | The inductance with cable shall be 6 (uH) |
| P-EIS-RCS-PPD-INJ_PULSE_KICK.18 | The cooling type shall be water |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.1 | The location (Section) shall be 2 o'clock |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.2 | The dimension in W shall be 4 (ft) |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.3 | The dimension in L shall be 8 (ft) |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.4 | The dimension in H shall be 7 (ft) |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.5 | The num magnets shall be 1 |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.6 | The mag gap shall be tbd (cm) |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.7 | The rise time shall be 0.00001 (sec) |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.8 | The fall time shall be 0.00001 (sec) |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.9 | The flat top time shall be 0.005 (sec) |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.10 | The waveshape shall be trap |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.11 | The flat top repeatability shall be tbd % |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.12 | The uniformity of the flattop shall be tbd (V) |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.13 | The deflecting Angle shall be 30 (mRad) |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.14 | The rep rate spec shall be 100 (Hz) |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.15 | The output voltage Spec shall be 30 (Volts) |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.16 | The output current spec shall be 530 (Amps) |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.17 | The inductance with cable shall be 12.5 (uH) |
| P-EIS-RCS-PPD-INJ_PULSE_SEPT.18 | The cooling type shall be water |
| P-EIS-RCS-PPD-INJ_RF_KICK.1 | The location (Section) shall be 2 o'clock |
| P-EIS-RCS-PPD-INJ_RF_KICK.2 | The dimension in W shall be 5 (ft) |
| P-EIS-RCS-PPD-INJ_RF_KICK.3 | The dimension in L shall be 10 (ft) |
| P-EIS-RCS-PPD-INJ_RF_KICK.4 | The dimension in H shall be 7 (ft) |
| P-EIS-RCS-PPD-INJ_RF_KICK.5 | The num magnets shall be 1 |
| P-EIS-RCS-PPD-INJ_RF_KICK.6 | The mag gap shall be tbd (cm) |
| P-EIS-RCS-PPD-INJ_RF_KICK.7 | The rise time shall be 0.00001 (sec) |
| P-EIS-RCS-PPD-INJ_RF_KICK.8 | The fall time shall be 0.00001 (sec) |
| P-EIS-RCS-PPD-INJ_RF_KICK.9 | The flat top time shall be 0.0000025 (sec) |
| P-EIS-RCS-PPD-INJ_RF_KICK.10 | The waveshape shall be trap |
| P-EIS-RCS-PPD-INJ_RF_KICK.11 | The flat top repeatability shall be tbd % |
| P-EIS-RCS-PPD-INJ_RF_KICK.12 | The uniformity of the flattop shall be tbd (V) |
| P-EIS-RCS-PPD-INJ_RF_KICK.13 | The deflecting Angle shall be 1 (mRad) |
| P-EIS-RCS-PPD-INJ_RF_KICK.14 | The rep rate spec shall be 100 (Hz) |
| P-EIS-RCS-PPD-INJ_RF_KICK.15 | The output voltage Spec shall be 5000 (Volts) |
| P-EIS-RCS-PPD-INJ_RF_KICK.16 | The output current spec shall be 2300 (Amps) |
| P-EIS-RCS-PPD-INJ_RF_KICK.17 | The inductance with cable shall be 4 (uH) |
| P-EIS-RCS-PPD-INJ_RF_KICK.18 | The cooling type shall be water |
This function not yet implemented.