Requirement Details
Electron Ion Collider
F-EIS-HETL-INST-PM.1
Requirement details, history, relationships and interfaces associated with requirement F-EIS-HETL-INST-PM.1
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 10/10/2024 14:48 | |||
| Identifier: | F-EIS-HETL-INST-PM.1 | WBS: | 6.03 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | In Process | |
| Description: | For instrumentation purposes the high energy TL from the RCS to the ESR shall contain a number of strategically placed YAG\OTR at the entry and exit of a number of the diploes and quadrupoles as required. | ||
| Comments: | |||
No archive versions
| Parents | |
| G-EIS.2 | The EIS shall provide an electron beam having sufficient energy to meet the ESR beam requirements as set forth in [5.9]. |
| G-EIS.3 | The EIS shall provide an electron beam with the RMS bunch momentum spreads at extraction which meet the ESR beam requirements as set forth in [5.9]. |
| G-EIS.4 | The EIS pre-injector shall provide an electron beam to the ESR having a horizontal beam emittance which is compatible with operation of the ESR. |
| G-EIS.5 | The EIS pre-injector shall provide an electron beam to the ESR having a vertical beam emittance which is compatible with operation of the ESR. |
| G-EIS.6 | The EIS shall inject into the ESR at a rate of 1[Hz]. |
| G-EIS.7 | The EIS shall inject one bunch into the ESR whilst being able to provide 2 bunches per injection cycle. |
| G-EIS.9 | The EIS shall provide an electron beam to the ESR having the bunch charge at extraction to meet the beam requirements as set forth in [5.9]. |
| G-EIS.8 | The EIS shall provide an electron beam to the ESR having RMS Bunch lengths at extraction to meet beam requirements as set forth in [5.9]. |
| G-EIS.10 | The ESR bunch replacement pattern will be defined by 1.the required polarization pattern to be provided to the experiments, 2.decay rates and 3. The RF cogging limitations of the beam transfer between RCS and ESR. |
| Children | |
| P-EIS-HETL-INST-PM.1 | The optical resolution for beam profile measurements shall be < 50 um |
| P-EIS-HETL-INST-PM.2 | A single YAG/OTR PM station shall be located at a dispersive location and used to determine the beam energy spread. |
| P-EIS-HETL-INST-PM.3 | The "energy spread PM" station shall be able to measure the beam energy over the range TBD |
| P-EIS-HETL-INST-PM.4 | The "energy spread PM station" shall be able to measure the beam energy with a resolution of 2.5 10-3 rms units |
| P-EIS-HETL-INST-PM.5 | Multiple, strategically located YAG/OTR screens shall be used in combination for beam emittance measurements |
| P-EIS-HETL-INST-PM.6 | The locations of the profile monitors shall be TBD |
| P-EIS-HETL-INST-PM.7 | The total number of profile monitors shall be TBD ea |
This function not yet implemented.