Requirement Details
Electron Ion Collider
F-EIS-GUN-INST.5
Requirement details, history, relationships and interfaces associated with requirement F-EIS-GUN-INST.5
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 03/17/2025 17:06 | |||
| Identifier: | F-EIS-GUN-INST.5 | WBS: | 6.03.04 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | Not Applicable | |
| Description: | The Diagnostic beamline section shall have one Beam Profile Monitor and Wien Filter and an electrostatic bender before the Mott polarimeter and Faraday Cup. | ||
| Comments: | |||
| Record Date: 01/27/2025 16:43 | |||
| Identifier: | F-EIS-GUN-INST.5 | WBS: | 6.03.04 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | On Hold | |
| Description: | The Diagnostic beamline section shall have one Beam Profile Monitor and Wien Filter and an electrostatic bender before the Mott polarimeter and Faraday Cup. | ||
| Comments: | |||
| Parents | |
| G-EIS.2 | The EIS shall provide an electron beam having sufficient energy to meet the ESR beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
| G-EIS.3 | The EIS shall provide an electron beam with the RMS bunch momentum spread at extraction which meet the ESR beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
| G-EIS.4 | The EIS pre-injector shall provide an electron beam to the ESR having a horizontal beam emittance which is compatible with operation of the ESR. |
| G-EIS.5 | The EIS pre-injector shall provide an electron beam to the ESR having a vertical beam emittance which is compatible with operation of the ESR. |
| G-EIS.6 | The EIS shall inject into the ESR at a rate of 1[Hz]. |
| G-EIS.7 | The EIS shall inject one bunch into the ESR whilst being able to provide 1 bunch per injection cycle. |
| G-EIS.8 | The EIS shall provide an electron beam to the ESR having RMS Bunch lengths at extraction to meet beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
| G-EIS.9 | The EIS shall provide an electron beam to the ESR having the bunch charge at extraction to meet the beam requirements as set forth in the MPT. [Document#:EIC-SEG-RSI-005] |
| G-EIS.10 | The EIS bunch replacement process shall deliver polarized replacement bunches capable of creating all the ESR polarization patterns needed to meet the physics goals. |
| Children | |
| P-EIS-GUN-INST-SR.01 | In the gun diagnostic line an electrostatic bend spin rotator (based on Illinois Univ. design, 1993) shall be used |
| P-EIS-GUN-INST-SR.02 | The system shall include two High voltage power supplies and two HV cables |
| P-EIS-GUN-INST-SR.04 | The system shall be able to bend the electron spin such that the direction after bending is horizontal |
| P-EIS-GUN-INST-SR.03 | When bending at 300 keV the system shall have a bend angle of 143 deg |
| P-EIS-GUN-INST-SR.05 | The system shall be able to bend the beam over the range of electron beam energies from 280 to 350 KeV |
This function not yet implemented.