Requirement Details
Electron Ion Collider
F-DET.12
Requirement details, history, relationships and interfaces associated with requirement F-DET.12
CURRENT RECORD- ARCHIVE RECORDS
- RELATIONSHIPS
- INTERFACES
| Record Date: 10/11/2023 00:00 | |||
| Identifier: | F-DET.12 | WBS: | 6.10 |
| Date Modified: | TBD: | FALSE | |
| Status Date: | Status: | APPROVED | |
| Description: | The detector and its sub-systems will require adequate infrastructure capabilities (i.e. crane capacity, floor loading, physical space, etc.) to effectively support operations and maintenance. | ||
| Comments: | |||
No archive versions
| Parents | |
| G-DET.10 | The detector systems must fit within the available space in the experimental hall, and be consistent with the available infrastructure and resources. |
| G-DET.9 | The detector and its sub-systems will be functionally integrated with one another, with the interaction region components, and with the facility infrastructure. |
| Children | |
| P-DET-ANC-LOWQ2.8 | The Low-Q2 system shall provide power supplies for bias and low voltages. |
| P-DET-DAQ.3 | All DAQ services in the experimental hall must be adequately shielded from prompt radiation from the beam crossing region of the EIC detector to minimize electronics failures. |
| P-DET-DAQ.4 | User management of required cabling shall be facilitated via a combination of cable trays and/or conduit or rigging between the DAQ room patch panels and the experimental hall areas where DAQ and general network fibers are required. |
| P-DET-DAQ.5 | DAQ Room resources shall sit on a raised floor to allow for forced air, power and signal cabling to be routed to all racks. |
| P-DET-MAG.4 | The detector solenoid cryostat should be able to fit well within the Barrel HCal (radially) and fit within the given space in the axial direction. |
| P-DET-MAG.5 | The magnet shall provide a minimum 2.8 meter bore diameter to support insertion of the detector elements. |
| P-DET-TRAK.3 | The tracking system shall provide power supplies for bias and low voltages. |
| P-DET-TRAK.4 | The tracking system shall provide a gas mixing system for gaseous detectors. |
This function not yet implemented.